Contour Cutting using Wasatch SoftRIP - DG Tech

Recommendations

Info

Export this to a PostScript file (to maintain the vector information of the cutting path). Next open the file in SoftRip, you will see a blue dotted line appearing where the cut path should be (if you have configured SoftRip to show an animated cut path, the line will scroll clockwise), this is a first indication that there is nothing wrong with your file. 09/12/08 6
Next select Rip only from the Print drop-down menu, this will put the file in the RIP queue. Now go to the Queue by selecting Print – Queue, you will get following screen: 1. This is the RIP Queue, which represents all the files being ripped and that are ripped 2. This is the Print Queue, which represents all the files being or that are printed. To continue press the button “Layout” (3) this will transport you to the layout screen, where you need to select how many copies, and set the layout of the to be printed job. Once your file has been printed and you have load the job in your cutter, press the “Cut button” (4) this will transport you to the <strong>Cutting</strong> queue. 09/12/08 7
Page 1 and 2: Contour Cutting using Wasatch SoftR
Page 3 and 4: Under “Printer Model” select
Page 5: !! NOTE !! This feature only works

Contour Cutting using Wasatch SoftRIP - DG Tech

Create successful ePaper yourself

Delete template?

Save as template?