Automotive spark-ignited direct-injection gasoline engines

554
F. Zhao et al. / Progress in Energy and Combustion Science 25 (1999) 437–562
WARD’s Engine and Vehicle Technology Update
1995;21(11):1–2.
[47] Pontoppidan M et al. Experimental and numerical approach
to injection and ignition optimization of lean GDI-combustion
behavior. SAE Technical Paper, No. 1999-01-0173,
1999.
[48] Yang J, Anderson R. Use of split fuel injection to increase
full-load torque output of a direct-injection SI engine. SAE
Technical Paper, No. 980495, 1998.
[49] Kuwahara K et al. Two-stage combustion for quick catalyst
warm-up in gasoline direct injection engine. Proceedings of
the Fourth International Symposium COMODIA 98, 1998. p.
293–8.
[50] Iwamoto Y, Noma K, Yamauchi T, Ando H. Development of
gasoline direct injection engine. SAE Technical Paper, No.
970541, 1997.
[51] Iwamoto Y, Noma K, Nakayama O, Yamauchi T. Development
of gasoline direct injection engine. Proceedings of
JSAE Spring Convention (in Japanese), No. 971, 1997. p.
297–300.
[52] Shelby M et al. Early spray development in gasoline directinjected
spark ignition engines. SAE Technical Paper, No.
980160, 1998.
[53] Zhao F, Yoo J-H, Lai M-C. In-cylinder spray/wall interactions
of a gasoline direct-injection engine. Proceedings of
ILASS-America, 1997.
[54] Dodge LG. Fuel preparation requirements for direct-injected
spark ignition engines. Proceedings of ILASS-America,
1996. p. 120–4.
[55] Dodge LG. Fuel preparation requirements for direct-injected
spark ignition engines. SAE Technical Paper, No. 962015,
1996.
[56] Fujieda M, Siraisi T, Oosuga M. Influence of the spray
pattern on combustion characteristics of the direct injection
SI engine. Proceedings of ILASS-Japan (in Japanese), 1995,
p. 173–7.
[57] Fraidl GK, Piock WF, Wirth M. Gasoline direct injection:
actual trends and future strategies for injection and combustion
systems. SAE Technical Paper, No. 960465, 1996.
[58] Xu M, Markle LE. CFD-aided development of spray for an
outwardly opening direct injection gasoline engine. SAE
Technical Paper, No. 980493, 1998.
[59] Xu M et al. Recent Advances in direct injection gasoline
injector technology and fuel preparation strategy. Proceedings
of the Second International Workshop on Advanced
Spray Combustion, 24–26 November 1998, Hiroshima,
Japan, Paper No. IWASC9818, 1998. p. 201–13.
[60] Tomoda T, Sasaki S, Sawada D, Saito A, Sami H. Development
of direct injection gasoline engine—study of stratified
mixture formation. SAE Technical Paper, No. 970539, 1997.
[61] Lefebvre AH. Atomization and sprays, Washington, DC:
Hemisphere, 1989.
[62] Varble D et al. Design, modeling and development of a
unique gasoline direct injection fuel system. ISATA
98VR028, Dusseldorf, Germany, 1998.
[63] Varble D et al. Development of a unique outwardly-opening
direct injection gasoline injector for stratified-charge
combustion. Aachen Colloquium Automobile & Engine
Technology, 5–7 October 1998.
[64] Pontoppidan M, Gaviani G, Marelli M. Direct fuel-injection—a
study of injector requirements for different mixture
preparation concepts. SAE Technical Paper, No. 970628,
1997.
[65] Schapertons H, Emmenthal KD, Grabe HJ, Oppermann W.
VW’s gasoline direct injection (GDI) research engine. SAE
Technical Paper, No. 910054, 1991.
[66] Okada Y et al. Development of high-pressure fueling system
for a direct-injection gasoline engine. SAE Technical Paper,
No. 981458, 1998.
[67] Tatschl R. PDF modeling of stratified-charge SI engine
combustion. SAE Technical Paper, No. 981464, 1998.
[68] Hiroyas H. Experimental and theoretical studies on the structure
of fuel sprays in diesel engines. Proceedings of ICLASS-
91, Keynote Lecture, 1991. p. 17–32.
[69] Anderson RW, Yang J, Brehob DD, Vallance JK, Whiteaker
RM. Understanding the thermodynamics of direct injection
spark ignition (DISI) combustion systems: an analytical and
experimental investigation. SAE Technical Paper, No.
962018, 1996.
[70] Schmidt D et al. Pressure-swirl atomization in the near field.
SAE Technical Paper, No. 1999-01-0496, 1999.
[71] Miyamoto T, Kobayashi T, Matsumoto Y. Structure of
sprays from an air-assist hollow-cone injector. SAE Technical
Paper, No. 960771, 1996.
[72] Houston RA, Cathcart GP. Combustion and emissions
characteristics of Orbital’s combustion process applied to a
multicylinder automotive direct injected 4 stroke engine.
SAE Techhnical Paper, No. 980153, 1998.
[73] Krebs S et al. A cooperative approach to air-assisted direct
gasoline injection. Proceedings of GPC’98, Advanced
Engine Design and Performance, 1998. p. 89–102.
[74] Stocker H et al. Application of air-assisted direct injection to
automotive 4-stroke engines—the total system approach.
Aachen Colloquium Automobile & Engine Technology, 5–
7 October 1998. p. 711–29.
[75] Zhao F, Taketomi M, Nishida K, Hiroyasu H. Quantitative
imaging of the fuel concentration in a SI engine with laser
Rayleigh scattering. SAE Technical Paper, No. 932641,
1993.
[76] Zhao F, Taketomi M, Nishida K, Hiroyasu H. PLIF measurements
of the cyclic variation of mixture concentration in a SI
engine. SAE Technical Paper, No. 940988, 1994.
[77] Iiyama A, Muranaka S. Current status and future respective
of DISC engine. Proceedings of JSAE (in Japanese), No.
9431030, 1994. p. 23–9.
[78] Zhao F, Yoo J-H, Liu Y, Lai M-C, Zhang L, Yoshida Y.
Characteristics of gasoline direct-injection sprays. Proceedings
of ILASS-America, 1997.
[79] Zhao F, Yoo J-H, Liu Y, Lai M-C. Characterization of
direct-injection gasoline sprays under different ambient
and fuel injection conditions. Proceedings of ICLASS-97,
1997.
[80] Yoo J-H et al. Visualization of direct-injection gasoline spray
structure inside a motoring engine. Proceedings of ILASS-
America’98, 1998. p. 101–5.
[81] Yoo JH, Kim SK, Zhao F, Lai MC. Visualization of
direct-injection gasoline spray and wall-impingement inside
a motoring engine. SAE Technical Paper, No. 982702, 1998.
[82] Fraidl GK, Winklhofer E, Piock W, Schoeggl P, Wirth M.
Gasoline DI engines: the complete system approach by interaction
of advanced development tool. SAE Technical Paper,
No. 980492, 1998.