S90 XS/S70 XS Reference Manual - zZounds.com

PB Range Upper (Pitch Bend Range Upper)
PB Range Lower (Pitch Bend Range Lower)
Determines the maximum Pitch Bend range in semitones.
Setting the Upper parameter to +12 would result in a maximum pitch rise of one octave when the Pitch Bend wheel is
moved upwards. On the other hand, the Lower setting of -12 would result in the pitch being lowered up to a maximum of
one octave (12 semitones) when the Pitch Bend wheel is moved downwards.
Settings: -48 semi – +0 semi – +24 semi
Mono/Poly
Selects whether the Voice is played monophonically (only one note at a time) or polyphonically (multiple notes sounding
simultaneously).
Settings: mono, poly
Key Assign Mode
This is useful when two or more instances of the same note are received nearly simultaneously, or without a
corresponding Note Off message.
Settings: single, multi
Porta Sw (Portamento Switch)
Determines whether Portamento is applied to the current Voice or not.
Settings: off, on
Porta Time (Portamento Time)
Determines the pitch transition time when Portamento is applied. The effect of the parameter differs depending on the
settings of the “Portamento Time Mode.” Higher values result in a longer pitch change time, or a slow speed.
Settings: 0 – 127
mono When set to “mono,” the selected Voice is played back monophonically (only a single note is played back simultaneously). For
many instrument sounds (such as bass and synth lead), this allows a more natural and smooth sounding legato performance than
when this parameter is set to “poly.”
poly When set to “poly,” the selected Voice is played back polyphonically (multiple notes can be played back simultaneously or a chord
is played back).
single When this is set to “single” and double playback of the same note are transmitted to the internal tone generator, the first note will be
stopped then the next note will be sounded.
multi When this is set to “multi” and double playback of the same note are transmitted to the internal tone generator, all the notes are
sounded simultaneously.
Porta Mode (Portamento Mode)
Determines how Portamento is applied to your keyboard performance.
Settings: fingered, fulltime
fingered Portamento is only applied when you play legato (playing the next note before releasing the previous one).
fulltime Portamento is applied to all notes.
Porta Time Mode (Portamento Time Mode)
Determines how the pitch changes in time.
Settings: rate1, time1, rate2, time2
rate1 Pitch changes at the specified rate.
time1 Pitch changes in the specified time.
rate2 Pitch changes at the specified rate within a octave.
time2 Pitch changes in the specified time within an octave.
Porta Lgt Slope (Portamento Legato Slope)
When the Mono/Poly is set to “mono,” legato playing may produce an unnatural attack depending on the waveform
assigned to the selected Voice. To solve such a problem, you can use this parameter to adjust the attack of the Voice.
Normally, this should be set to a low value for waveforms with short attack times, and should be set to a high value for
waveforms with long attack times.
Settings: 0 – 7
Reference Manual
Reference
Basic Structure
Voice
Performance
Multi
SEQ Play
Master
Remote
File
Voice
Audio Rec/Play
Utility
Play
Normal Voice Edit
Common Edit
Name
Play Mode
Arpeggio
Arp Edit
Arp 1-5 Type
Controller
LFO
Filter/EG
3 Band EQ
Effect
Element Edit
OSC
Tune
PEG
Filter Type
FEG
Filter Scale
AMP Level/Pan
AEG
AMP Scale
LFO
EQ
Drum Voice Edit
Common Edit
Name
Play Mode
Arpeggio
Controller
Filter/EG
3 Band EQ
Effect
Key Edit
OSC
Tune
Filter Type
AMP Level/Pan
AEG
EQ
Job
Recall
Bulk
Supplementary Info.
Appendix
35