The IBM eServer BladeCenter JS20 - IBM Redbooks

2. Unzip the firmware update package into a directory on the workstation where
you are running the Web browser that you are using to connect the
Management Module Web interface.
3. Update each PKT file to the Management Module as explained in the
following steps.
a. In the navigation panel of the Management Module Web interface
(Figure 5-8), select MM Control → Firmware Update.
b. In the Update MM Firmware pane (right side of Figure 5-8), select the
Browse button and locate the PKT file in the directory where you
unpacked it.
c. Click the Update button to initiate the download of the PKT file to the
Management Module. This step may take some time to complete.
Figure 5-8 Updating the Management Module firmware
d. A window opens that shows you the progress of the download.
e. Click the Continue button when prompted to confirm the firmware update.
This step may also take some time to complete.
f. Another window opens that shows you the progress.
Chapter 5. Hardware setup 81