CHROME - Lidor.pl

CHROME
FRONT END 166
BRAKE COVERS 170
ENGINE 174
REAR END 180
LICENSE PLATES 187

166
FRONT END
DECO EAGLE
FENDER ORNAmENT
True vintage styling of the 40’s & 50’s! Light weight ABS design
& simple peel-&-stick application will have you back on the
road in no time!
Fits: Universal: Front Fenders with approximately 15-1/4"
Radius Curve
Honda: VTX1800C/F, VTX1300C, Fury, VT1300 Custom Line
Kawasaki: Vulcan 1700 Models, Voyager & Vulcan 900 Models
Yamaha: V Star 650, 950, 1300 Models & Road Star Models
(Not for Roadliner, Stratoliner or Raider)
7333 Deco Eagle Fender Ornament (ea)
TRICEPTOR
FENDER ACCENT
You decide where it looks best - as a
tip or top fender accent. Peel-&-stick
installation quickly adds some sparkle &
covers unsightly stone chips.
Fits: Honda: All VTX1300/1800 & VT1300
Custom Line
Yamaha: All V Star 1300/1100/650, all
Road Star, all Roadliner/Stratoliner, &
Raider
Universal: 4” or wider style fenders (does
not fit fenders with flat center width)
7340 Triceptor Fender
Accent (ea)
$ 42.99
7340
$ 39.99
7344
FRONT FENDER TIP
Protection & style for your front fender. Add
this chrome accent & avoid or cover those
ugly stone chips. With peel-&-stick installation,
embellish the contours of your front fender
quickly & painlessly.
Fits: Honda: All VTX1800C/F, all VTX1300C &
VT1300 Custom Line
Yamaha: All V Star 1300/1100/650, all
Road Star, & all Roadliner/Stratoliner &
Deluxe
Universal: 6” or wider style fenders (does not
fit fenders with flat center width)
7344 Front Fender Tip (ea)
FRONT
FENDER SPEAR
Patent Pending
Add a stunning little sparkle of chrome to
your fender & catch everyone’s attention! Simply
peel-&-stick! Measures 1-1/4" Wide x 8" Long.
Fits: Universal: Front Fenders with approximately
15-1/4" Radius Curve
Honda: VTX1800C/F, VTX1300C, Fury, VT1300
Custom Line
Kawasaki: Vulcan 1700 Models, Voyager & Vulcan
900 Models
Yamaha: V Star 650, 950, 1300 Models & Road Star
Models (Not for Roadliner, Stratoliner or Raider)
7332 Front Fender Spear (ea)
$ 32.99
9022
$ 24.99
FENDER ORNAmENTS
Let your front fender take on new life
with one of our majestically sculpted
fender ornaments.
Fits: Universal applications require
drilling holes in fender & hard wiring
for installation
9022 Wild Boar (ea)
9026 Eagle (ea)
3103 Replacement
Bulb, #161 (ea)
make a bold
statement!
9026
$ 59.99
$ 49.99
$ 1.99
W W W . K U R Y A K Y N . C O M

8684
BRAKE LINE ACCENT
COVERS for vtx1800
Cover those bare stamped brackets holding
your front brake lines to the forks with some
blood grooved chrome.
Fits: All '02-'08 VTX1800 Models
7823 Brake Line Accent Covers (pr)
STILETTO AxLE CAPS
for vtx
$ 39.99
LOwER FORK SKINS for vtx1800
Create a shining first impression! Whether parked or in motion, your front end
is often the first thing people notice on your bike. Show it in it’s best light with
these attention grabbing chrome Lower Fork Skins. Used alone or with our
other chromed front end components, they will reflect well on you & your VTX.
Fits: All ’02–’08 VTX1800 Models
8684 Lower Fork Skins (pr)
For those with Stiletto ISO-Grip End Caps, here’s an
opportunity to make a stronger statement. Stiletto Axle Caps fit
up closely to the sliders with no unsightly gaps.
Fits: All VTX1300/1800 Models
1207 Stiletto Axle Caps (pr)
7823
$ 89.99
Note: Will not install with Küryakyn Lower Fork Skins.
7823
Caliper Cover pg 170
$ 139.99
SPuN BLADE
SPINNING AxLE CAPS
Reminiscent of the great Mustang fighter planes,
these spinning blades give the illusion of flight. The
chrome-plated ABS blades start to spin when the
bike reaches about 25 mph. An easy, innovative way
to add some additional cool factor to your bike.
Fits: All VTX1300/1800 Models
1239 Spun Blade Spinning Axle Caps (pr)
Note: Will not install with Küryakyn Lower Fork Skins.
$ 119.99
8 6 6 . 2 7 7 . 9 5 9 8 167
8684
BIKE MAPS
GOLDWING
CAN-AM
SPORT BIKE
LIGHTING
ACCESSORY
MOUNTS
HANDLEBAR
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR CLEANERS
MISC
INDEX

NECK COVER for v star 1100
A stunning replacement for the dull, stock, black components
found on your bike. The chrome-plated contours have been
smoothed & molded to provide a flowing appearance. The
right side cover has a stylized teardrop shaped boss that
surrounds the ignition switch & leaves just its outer surface
exposed. Simple installation.
Fits: All ’99-‘09 V Star 1100 Models
7856 Neck Cover (set)
CHROmE FORK
PROTECTOR COVERS for raider
When styling choices for your Raider reach a fork in
the road, keep this in mind; chrome always looks better
than plain black plastic! The stock black fork protectors
are difficult & time consuming to remove but they do help shield
against nicks & scratches. These peel-&-stick chrome covers provide a classy
custom appearance while keeping the protection the factory intended in place.
Fits: All ‘08-‘12 Yamaha Raider Models
8699 Chrome Fork Protector Covers (pr)
168
$ 79.99
$ 39.99
REAR END CHROmE FOR YOuR RAIDER! - PG 184
HEADLIGHT
VISOR
Long, lean, & mean! That’s the illusion your
stock headlight shell will get by adding this slick
Headlight Visor. Features a nicely finished rolled
front edge with center bullet - a big difference that
will be noticed immediately. Fastens securely to
your existing headlight for easy installation!
Fits: All ’99-’12 Road Star Models (except Warrior),
all ’98-’10 V Star 650 Classic & '99-'09 V
Star 1100 Classic Models with 7" headlamp
2182 Headlight Visor (ea)
4015
$ 32.99
SPEEDOmETER VISOR
Easily affixes to the speedometer. Besides the
sleek appearance, you’ll really appreciate the
reduction in glare if you run a windshield!
4015 Speedo/Tach Visor (ea)
Fits: Honda: ‘02-’06 VTX1800C,
All 250 Rebel, Shadow 1100 with
Round Speedo on handlebars
measuring 3-3/4”
Victory: All '04-'12 Models
(Jackpot, Kingpin, Vegas,
Hammer) with digital gauge
(except Vision)
Universal: Speedometers &
tachometers 3-3/4” diameter with
7/16” of exposed bezel/sidewall
4016 Speedo/Tach Visor (ea)
Fits: Speedometers & tachometers
3-1/4” diameter with 1/8” of
exposed bezel/sidewall
W W W . K U R Y A K Y N . C O M
$ 26.99
$ 25.99
4016
4016

8680 D D
8681
A. NECK COVER for valkyrie
This beautifully chromed delta-shaped cover
neatly hides the front tank tab & neck top.
Stainless steel mounting hardware is included
to complete this easy installation.
Fits: All ‘97-’04 Valkyrie Models (except Rune)
$
7855 Chrome Neck Cover 29.99
for Valkyrie (ea)
B. FENDER LOuVERS for vtx
Your VTX Retro fender is classy but it cries
out for these precision fitting molded chrome
inserts - by far the finest available! Don’t
confuse ours with other ill-fitting, poor quality
versions out there
Fits: All ’03-’09 VTX1300 Retro/S/T & all
’02-’08 VTX1800 Retro/S/T Models
$
9018 Front Fender Louvers (set) 32.99
$
9019 Rear Fender Louvers (set) 32.99
D
B
8680
A C
C. HANDLEBAR RISER ACCENTS
for m109r
Most people agree, this Cruiser is one of the greatest available. It
doesn’t need much but these easy stick-on chrome Riser Accents sure
make a difference.
Fits: ’06-’12 Suzuki M109R Models
$
8682 Handlebar Riser Accents (pr) 41.99
D. TRIPLE TREE COVER SET for vtx
This is the ultimate front end dress-up kit for the VTX. We offer a 5-piece
set that includes a one-piece cover for the top triple clamp, chrome fork
tube caps, & covers for the lower triple clamp for the VTX1800C. We
offer a 3-piece set that includes a one-piece cover for the top triple clamp
& a pair of die-cast fork tube caps for the VTX1300. This kit provides the
look of a custom chrome replacement triple tree set at a fraction of the
cost & with significantly less work!
8680 Upper & Lower Triple Tree Cover Set (pr)
Fits: ’02-’08 VTX1800C/F
$
8681 Upper Triple Tree Cover (ea)
59.99
Fits: ’03-’09 VTX1300R/S/T/C
Note: Requires removal of handlebar/riser assembly & headlight mount during installation.
$ 59.99
8 6 6 . 2 7 7 . 9 5 9 8 169
BIKE MAPS
GOLDWING
CAN-AM
SPORT BIKE
LIGHTING
ACCESSORY
MOUNTS
HANDLEBAR
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR CLEANERS
MISC
INDEX

FRONT CALIPER COVER for honda
Details make the difference! In just a few minutes
your front brake caliper can spring to life with this
brilliant chrome cover. Styled to complement the
Rear Caliper Cover, the pair provides a balanced,
integrated look. Installation is a snap with high
strength peel-&-stick adhesive.
$
1282 Fits: All‘03–’09 VTX1300 Retro/S/T Models 39.99
& '08-'12 Shadow 750 Aero Models (ea)
$
1284 Fits: All‘03–’09 VTX1300C Models & '08-'12 39.99
Shadow 750 Spirit/ Phantom Models (ea)
170
BRAKE COVERS
FRONT
CALIPER COVERS
for yamaha
This bold design evokes the look of a high performance six
piston brake caliper. With multiple cutouts, keep the look light
or install the black back plate & cover everything up. Installs
with high strength peel-&-stick adhesive.
Fits: All ’06-’12 Roadliner, Stratoliner & Deluxe Models, all
‘04-‘12 Road Star 1700 Models (except Warrior), & all '08-'12
Raider Models
8701 Front Caliper Covers (set)
$ 69.99
1294
7825
1298
7820
7821
BRAKE COmPONENT
DRESS-uP KIT for honda & kawasaki
All kits include a replacement fluid reservoir cap & a
wrap-around reservoir cover. The kit for the VTX1800C/F
also places a streamlined cover on the master cylinder. All
components feature a dazzling chrome finish.
7820 Brake Dress-Up Kit (ea)
Fits: ’02-’08 VTX1800C/F
7821 Brake Dress-Up Kit (ea)
Fits: ’03-’08 VTX1800 Retro/S/T/N, all
'09-'12 Fury Models & '10-'12 VT1300
Custom Line (Sabre, Stateline & Interstate)
7822 Brake Reservoir Cap (cap only)
Fits: Honda: '03-'09 VTX1300, '02-'08
VTX1800
Kawasaki: '02-'08 Mean Streak,
'03-'08 1600 Classic & Nomad, '11-'12
Vaquero 1700
CALIPER COVER
This wicked looking cover installs in minutes. No
tools required.
1294 Fits: Kawasaki: All Vulcan 900/1500/1600
Suzuki: 800 Volusia/Boulevard C50/M50
Yamaha: V Star 1100/1300, Stryker &
Royal Star Venture (ea)
REAR mASTER CYLINDER COVER
for yamaha
FRONT CALIPER COVERS for vtx1800
Perk up that front end by adding these super easy to
install chrome Caliper Covers.
Fits: All ’03-’08 VTX1800 Models (except Early ‘03 &
‘07-’08 Models or other Models with caliper bleeder
screw between brake line fittings)
1298 Caliper Covers for VTX1800 (pr)
$ 49.99
$ 39.99
$ 29.99
$ 21.99
Get a clean finished look in minutes.
Fits: All ‘99-’12 Road Star 1600/1700 Models (except
Warrior), & '09 -'12 V Star 950
7825 Rear Master Cylinder Covers (ea)
W W W . K U R Y A K Y N . C O M
$ 31.99
$ 20.99

REAR
CALIPER COVER
Finish off that rear brake with our pure custom
looking Rear Caliper Cover. You won’t believe the
difference!
1299 Rear Brake Caliper Cover (ea)
Fits: ‘02-’08 Honda VTX1800 Models
1289 Rear Caliper Cover (ea)
Fits: ‘06-’12 Suzuki M109R Models
13/16" W x
1-3/8” T
1231
1289
2013
2015
$ 39.99
$ 29.99
BRAKE BLEEDER SCREw COVER &
BANjO BOLT COVER
Easily installed, these pieces provide a nice detail when
dressing up brake calipers & master cylinders on Cruisers.
2013 Bleeder Screw Covers (pr)
2015 Banjo Bolt Cover (ea)
Fits: Most Cruisers with Banjo Fittings
Requiring a 12mm wrench
BuLLET COVERS for banjo bolts
Perfect accent for caliper bolts.
1231 Bullet Banjo Bolt Covers (ea)
Fits: All VTX1800 Models - Hand
Control Clutch Banjo Bolt, Most Banjo
Bolts require a 12mm wrench & only
have 1 line protruding (Universal fit)
$ 19.99
$ 15.99
$ 13.99
1299
REAR CALIPER COVER
for kawasaki & suzuki
Styled to imply speed & motion, our Rear
Caliper Cover creates a powerful high-tech
look. The rich chrome finish adds a bright spot
to the rear wheel area & is much easier to keep
clean than the stock finish. Installation is simple & quick with
high strength peel-&-stick adhesive.
Fits: Kawasaki: All ’06-’12 Vulcan 900 Models, all ’03-’08 Vulcan 1600
Models, all ’04–’10 Vulcan 2000 Models, all Vulcan 1600 Mean Streak, all
’02–’08 Vulcan 1500, & all '09-'12 Vulcan 1700 Classic
Suzuki: All ’06–’12 M109 Models, all ’08-’09 C109 & ‘09 M90 Models
1283 Rear Caliper Cover (ea)
$ 39.99
REAR BRAKE
CALIPER COVER for vtx1300
Flow chrome over that Rear Brake Caliper & make it
sparkle! Easy installation.
Fits: All ’03-’09 VTX1300 Models
1288 Rear Brake Caliper Cover (ea)
$ 39.99
8 6 6 . 2 7 7 . 9 5 9 8 171
BIKE MAPS
GOLDWING
CAN-AM
SPORT BIKE
LIGHTING
ACCESSORY
MOUNTS
HANDLEBAR
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR CLEANERS
MISC
INDEX

mARquIS CHOKE KNOB COVER U.S. Patent 5,836,214
Our attractive chrome Choke Knob Cover installs easily without removing or modifying the
stock choke knob.
Fits: Honda: All VTX1300, '04-’09 Shadow 750 Aero/Spirit C2
Kawasaki: Vulcan 800/1500/1600
Yamaha: '99-’07 Road Star 1600/1700 & All Royal Star Venture, V Star 650/1100
2009 Marquis Choke Knob Cover (ea)
PETCOCK COVER for vtx1300
Add the finishing touch to your drab fuel petcock by covering those unfinished parts with
style. The left side of your tank will now look high class.
Fits: All '03-’09 VTX1300 Models
7830 Petcock Cover for VTX1300 (ea)
SHIFTER PIVOT COVER for vtx
On a finely finished bike like the VTX, you don’t want an
ugly weld showing on an otherwise decent shift lever.
Fits: ’02-’08 VTX1800 Retro/S/N/T
4046 Shifter Pivot Cover (ea)
mEGA HORNS
Be heard loud & clear with our trumpet style horns for your ride. With
new Mega Horn technology, get that loud air horn style sound in one little
package. Installs swiftly in front of your motor along your front frame tubes.
Ride on & be heard.
7737 Mega Horns with Mount (ea)
Fits: Honda: All VTX1800/1300 Models
Note: Engine guards may limit installation.
172
7830
4046
2009
$ 139.99
KOOL KAPS chrome covers
$ 19.99
$ 29.99
$ 39.99
Cover those unsightly & unfinished bolt heads with brilliant chrome.
2447 For 3/4” Hex Bolts* (10 pack)
2451 For 3/4” hex head bolt used in
Küryakyn Highway Pegs* (pr)
$ 11.99
$ 2.99
DRIVER FOOTPEG
mOuNT COVERS for vtx1300c
Finish off those unfinished welds on your driver footpeg
mounts even if you aren’t a skilled welder! Our Driver
Footpeg Mount Covers work great with stock pegs & also
do wonders at showing off custom peg applications.
Fits: '03-’09 VTX1300C
7011 Driver Footpeg Mount Covers (pr)
works great
on our highway pegs!
* Requires a small amount of silicone. Found at local hardware store or order Küryakyn P/N 400039 for $8.99.
7011
W W W . K U R Y A K Y N . C O M
$ 49.99

ATTITuDE
mEDALLIONS
Add a personalized flair to your ride! Perfect
for the left side of your Yamaha Motor or to any
flat surface with a 4-1/2” diameter. Simple &
affordable - A great way to show off a
little attitude.
Fits: Universal peel-&-stick applications - Requires
a 4-1/2” diameter flat surface
Yamaha: All ’06-’12 Roadliner, Stratoliner/Deluxe
& ’08-’12 Raider Left Tranny Cover & Front Drive
Hub Cover, & all ’07-’12 V Star 1300 & Stryker,
’09-’12 V Star 950 Front Drive Hub Cover Only &
All V Star 650 Models on Air Cleaner Covers
*Not recommended for Yamaha Engine applications - Use on
flat surfaces only.
chrome medallions
3752 Helicopter Gunship (ea)
3754 Firefighter (ea)
3764 Deco* (ea)
3795 Flame* (ea)
1492
1491
add
some flair!
$ 19.99
$ 19.99
$ 19.99
$ 19.99
chrome medallions
3796 Widow (ea)
3797 Zombie (ea)
3798 Chauvinist (ea)
3799 Patriot (ea)
3797
3796
3799
3795
3797
$ 19.99
$ 19.99
$ 19.99
$ 19.99
3714
zOmBIE mEDALLIONS
3754
black medallions
3713 Widow, Black (ea)
3714 Zombie, Black (ea)
Keep a bunch of little Zombies with you wherever you are. Stick them on
your motorcycle, toolbox, car, computer monitor—anywhere you think
their sinister faces will brighten your day. Just peel off the backing &
fasten them anywhere!
1491 Large Zombie (pr)
Requires 2” of flat surface for mounting
1492 Small Zombie (pr)
Requires 1” of flat surface for mounting
Note: Replacements for Küryakyn P/N’s 7411,
7412 7520, 7521, & 8712
3713
$ 19.99
$ 18.99
3752
3764
$ 18.99
$ 18.99
8 6 6 . 2 7 7 . 9 5 9 8 173
3798
BIKE MAPS
GOLDWING
CAN-AM
SPORT BIKE
LIGHTING
ACCESSORY
MOUNTS
HANDLEBAR
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR CLEANERS
MISC
INDEX

174
ENGINE
FOR YAMAHA
TAPPET BLOCK COVERS for yamaha
Bolt directly over the bottom of your pushrod tubes & stand back to
admire the chrome flowing from your pushrod tubes all the way down
your bike. Road Stars can add the Cylinder Base Covers (P/N 7729) to
complete the new chromed base of your motor.
7728 Fits: All ‘99-’12 Road Star 1600/1700 & ‘02-’09 Road Star
Warrior Models (pr)
7726 Fits: ‘06-’12 Roadliner/Stratoliner/Deluxe, ‘08-’12 Raider, all
‘99-’12 Road Star 1600/1700, & ‘02-’09 Road Star Warrior
Models (Includes 1 pair of Tappet Block Bottom Accents
Only- no lower trim) (pr)
1062
$ 89.99
$ 69.99
CYLINDER BASE COVERS for road star
Flow chrome across the left side of your motor & atop your transmission to get
that expensive chromed motor look in minutes! Add our Tappet Block Covers
(P/N 7728) for enhanced sparkle on the right side.
Fits: All ‘99-’12 Road Star 1600/1700 & ‘02-’09 Road Star Warrior Models
7729 Cylinder Base Covers (set)
Note: Fully dress your motor with additional Yamaha OEM chrome motor covers.
SHIFT ROD LINKAGES for yamaha
$ 99.99
Direct replacement installation. Let a little of your dark side out.
Fits: All ’99-’12 Road Star 1600/1700 (except Warrior) & '08-'12 Raider Models
1061 Widow Shift Rod Linkage (ea)
1062 Zombie Shift Rod Linkage (ea) ©2008 Küryakyn
7726 7725
$ 89.99
$ 89.99
1061
STARTER COVER for yamaha
Crown the end of your starter in Sparkling chrome & add
smooth chrome lines to the top of your industrious look starter.
This will really dress up the look of the front of your motor.
$
7725 All ’06 -’12 Roadliner, Statoliner, 49.99
Deluxe, & Raider Models (ea)
PuSHROD TOP COVERS for yamaha
Connect the chrome between your valve covers & push rod
tubes on the right side of your motor.
7759 Fits: ‘99-’03 Road Star 1600 Models (pr)
FINNED SPARK PLuG COVERS
for road star 1700
7761 Fits: All ‘04-’07
Road Star 1700
Models (except
Warrior)
For Carbureted
Models Only (pr)
7759
$ 39.99
7728
W W W . K U R Y A K Y N . C O M
$ 39.99

A. ENGINE CAm
ADjuSTER BOLT COVER
for victory
Cover those unsightly cam adjuster bolts with these
great looking, gear tooth designed accents. Engineered
exclusively for the Victory motor, these covers bolt on &
coordinate with all the Victory chrome engine accents.
7684 Fits: All '06-'12 Victory Models, Cruisers
& Touring (pr)
B. CHROmE DIPSTICK COVER
for victory
As useful as dipstick’s are, they can be an eyesore &
take away from the look of your motor. This new chrome
dipstick cover features a gear tooth design that looks great
& retains the functionality of stock. Installation is quick &
easy to get you back on the road in no time.
7682 Fits: All '06-'12 Victory Models, Cruisers &
Touring (ea)
Note: Only for 100" or 106" motors.
$ 45.99
D. CLuTCH ARm COVER
for victory
No other clutch arm cover offered for the Victory motor
looks this good or installs this easy. Featuring a gear tooth
design & simple bolt on installation to get you back on the
road in no time.
7686 Fits: All '04-'12 Victory Models,
Cruisers & Touring (ea)
E. SmOOTH V
for victory
C. ROuLETTE HORN COVER for victory
A chrome horn is just seconds away with this great looking cover. Retains the
sound & improves the look on horns mounted between the frame down tubes.
7689 Fits: All '04-'12 Victory Vegas, Kingpin, Hammer,
Jackpot, 8 Ball & Universal for '04-'12 Models with
horn mounted at neck between front down tubes (ea)
E
D
B
A
A
B
E
$ 59.99
D
$ 34.99
ENGINE
FOR VICTORY
$ 39.99
Update you Victory side covers with a smooth chrome look
that’ll really stand out. Installs in just minutes for a truly
unique look unlike any other.
7685 Fits:'03-'12 Victory Models with V
shaped covers between cylinders,
Fits both Left & Right side (pr)
7689
$ 59.99
Renderings
Shown
8 6 6 . 2 7 7 . 9 5 9 8 175
C
C
BIKE MAPS
GOLDWING
CAN-AM
SPORT BIKE
LIGHTING
ACCESSORY
MOUNTS
HANDLEBAR
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR CLEANERS
MISC
INDEX

ENGINE
FOR HONDA
176
7703
7708
7703
7731
W W W . K U R Y A K Y N . C O M

7703
7708
OWN A
SHOW-STOPPING
MOTOR AT A
REASONABLE
PRICE!
ENGINE CASE COVERS
for honda
Amaze everyone with the look of a new
show-stopping chrome motor on your VTX1300,
VT1300 Custom Line or Fury. See both sides of your
motor & even your clutch sparkle with chrome. No
more drab gray areas around the heart of your
motor any more.
7703 Fits: All ‘03-’09 VTX1300 Models
$
7731 Fits: All '09-'12 Fury, All '10-'12 199.99
VT1300 Custom Line (Sabre,
Stateline, & Interstate)
CHROmE BOTH SIDES OF YOuR ENGINE!
ENGINE COVER INSERTS
for honda
$ 199.99
Dress up your plain chrome engine covers with
these racy, speed-lined Engine Cover Inserts. Sold
in sets of 3, our molded ABS chrome-plated inserts
stick to the smooth clutch, timing, & left crankcase
covers adding depth & a machined from billet look.
Easily installed without tools. Simple peel-&-stick
installation.
7707 Engine Cover Inserts (set/3)
Fits: All ‘02-’08 VTX1800 Models
7708 Engine Cover Inserts (set/3)
Fits: All ‘03-’09 VTX1300 Models & all
'09-'12 Fury Models, all '10-'12 VT1300
Custom Line (Sabre, Stateline & Interstate)
ALSO AVAILABLE
1. BOOmERANG FRAmE TRIm
PG 180
2.DRIVE SHAFT COVER
PG 180
3.ADDITIONAL REAR
ENDCHROmE
PG 180-181
$ 69.99
$ 69.99
8 6 6 . 2 7 7 . 9 5 9 8 177
BIKE MAPS
GOLDWING
CAN-AM
SPORT BIKE
LIGHTING
ACCESSORY
MOUNTS
HANDLEBAR
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR CLEANERS
MISC
INDEX

7709
LOOKS GREAT WITH
OuR ENGINE CASE
COVERS!
CLuTCH HOuSING SHROuD
for vtx1800
We designed this part to finish the job started by our Engine
Case Covers. Made of stamped steel with chrome-plated
construction this piece installs quickly & easily with industrial
strength adhesive tape to perfectly cover the exposed upper
surface of the clutch housing.
Fits: All ’02-’08 VTX1800 Models with Küryakyn
Engine Case Covers (P/N 7704) only
7709 Clutch Housing Shroud (ea)
178
9002
8261
9002
$ 59.99
AFTER
BEFORE
8261
3/4”
3-1/8”
9001
REAR SHOCK TOP COVER for honda
Chrome shocks with a dull chrome top mount? Not good. Finish the chrome all
the way to the top with our Rear Shock Top Cover & notice the difference. With
Küryakyn styled blood grooves, these covers finish the shock top out right.
Fits: All Honda VTX1800 (except N) & all VTX1300, Shadow 1100 Sabre/Spirit,
Shadow 750 Ace/Aero/Spirit/Phantom & other Models with shocks matching
dimensions shown
8261 Rear Shock Top Cover for Honda (pr)
$59.99
REFLECTOR COVERS for honda & yamaha
Heighten visibility while adding a stylized cover!
9001 Small Reflector Covers (pr)
Fits: Front: All VTX1800, all 1100 Spirit (front & rear), all 750
Spirit, all Shadow VLX 600, '10-'12 VT1300 Custom Line & other
motorcycles with reflectors that are 3-5/16” by 1-1/4” or smaller
with 1/4” of clearance around the reflector
9002 Large Reflector Covers (pr)
Fits: Front: All Yamaha Road Star, V Star 950, 1100, Royal Star &
Royal Star Venture, Raider & Stryker
Rear: Honda: ‘02-’07 VTX1800 (except C) Models & ‘03-’06 1300
Retro/S/T, & other motorcycles with reflectors that are 3-1/2” by
1-3/8” or smaller with 1/4” of clearance around the reflector
W W W . K U R Y A K Y N . C O M
9001
$ 19.99
$ 19.99

ENGINE CASE COVERS
for vtx1800
Complete the creamy, luscious appearance of your VTX1800 with
these ultimate Engine Case Covers! Fit snugly along the base of
the engine below the fins on both sides. They look like expensive
chromed-engine cases but they bolt on in minutes & cost a heck
of a lot less.
Fits: All ‘02-’08 VTX1800 Models
7704 Engine Case Covers
$ 199.99
7704
DON'T MISS
EnginE covEr insErts - A simple & great looking addition!
SEE PG 177
REAR TANK TRIm
for vtx1300c
7824
Add some shine & fill the void between the gas
tank & your seat with this stylish chrome accent.
Keep the lines of your bike flowing & cover up those
crude welds on the back of your tank with a quick &
easy installation.
Fits: ‘03-’09 VTX1300C Models
7824 Rear Tank Trim for VTX1300C (ea)
INTAKE RuNNER/SPARK
PLuG COVER for valkyrie
Replace the dull cast surface with
beautiful show-chromed finish.
7705 Fits: Valkyrie
& Valkyrie
Tourer (except
Interstate) (pr)
$ 89.99
$ 39.99
after
7704
8 6 6 . 2 7 7 . 9 5 9 8 179
7704
TRANSmISSION
COVER SET for valkyrie
Put the finishing touch on your
cast transmission case & nicely
complement existing chrome engine
components.
7710 Fits: All Valkyrie
Models (except
Rune) (pr)
$ 169.99
BIKE MAPS
GOLDWING
CAN-AM
SPORT BIKE
LIGHTING
ACCESSORY
MOUNTS
HANDLEBAR
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR CLEANERS
MISC
INDEX

180
REAR END
A. BOOmERANG
FRAmE TRIm for vt1300 & fury
Cover those huge black side panels with aggressive styling &
beautiful chrome. These boomerang covers give you the ultimate
custom look without spending excess time & money to chrome
the frame. VT1300 Custom owners add the Küryakyn Drive Shaft
Cover (P/N 8951) & prepare to be amazed!
8950 Fits: ‘10-'12 VT1300 Custom Line (Sabre/
Stateline/Interstate) Models (pr)
8952 Fits: ‘09-’12 Fury Models (pr)
B. DRIVE SHAFT COVER for vt1300
Want the look of a custom chrome drive shaft without the
wasted time & extra hassle of tearing apart the rear end? This
cover will give you a custom look in minutes & will cost you
much less than chrome plating all the original parts.
Fits: ‘10-'12 VT1300 Custom Line (Sabre/ Stateline/
Interstate) Models
8951 Drive Shaft Cover (ea)
VTX1300 Shown
FOR HONDA
$ 99.99
F
8305 Shown
$ 119.99
$ 119.99
D E C F
A
B
C
D
8260
W W W . K U R Y A K Y N . C O M

D
D. DRIVE HuB TOP COVER for vtx
Imagine a great football team with no quarterback. Adding one key
player can create a legendary combination. Announcing Küryakyn’s
top draft pick; the Drive Hub Top Cover for the VTX. Add this new
player to your bike & our gleaming Chrome Drive Shaft Cover (P/N
8285) & this team could be on its way to the playoffs!
Fits: All Honda VTX1300/1800 Models with Küryakyn Drive Shaft
Cover (P/N 8285)
8688 Drive Hub Top Cover for VTX (ea)
F. FRAmE TRIm for vtx
Transform that rough black frame
forging into a sleek, stylish,
attention getter. This two-piece kit
attaches with high-strength, high
temp adhesive for quick & easy
installation.
8260 Fits: All VTX1800 (pr)
8305 Fits: All VTX1300 (pr)
$ 89.99
$ 79.99
E. SwINGARm COVER for vtx
Your friends are going to think you went out & bought a whole custom swingarm with this show-chrome cover. It'll
set you apart & is the perfect complement to our Drive Shaft Cover (P/N 8285).
Fits: All ‘03-’09 VTX1300 & ‘02-’08 VTX1800 Models
8287 Swingarm Cover for VTX (ea)
A
$ 99.99
$ 99.99
B
C. DRIVE SHAFT COVER for vtx
U.S. Patent D549,622
Compare our Drive Shaft Cover to others on the market. This
setup sets a whole new standard. Two-piece, chrome-plated
stamped steel construction covers both the differential &
shaft tube giving the appearance of a completely chromed
assembly.
Fits: All ‘03-’09 VTX1300 & ’02-’08 VTX1800 Models
8285 Drive Shaft Cover for VTX (ea)
$ 139.99
8 6 6 . 2 7 7 . 9 5 9 8 181
BIKE MAPS
GOLDWING
CAN-AM
SPORT BIKE
LIGHTING
ACCESSORY
MOUNTS
HANDLEBAR
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR CLEANERS
MISC
INDEX

182
REAR END
FOR YAMAHA
A. LOwER BELT
GuARD ACCENT for road star
Want to sparkle up that drab stock belt guard?
This accent is easily added to the lower belt guard
to protect the OEM belt while covering the black
plastic. WOW! What a difference!
Fits: All ‘99-’12 Road Star 1600/1700 Models
(except Warrior)
8663 Lower Belt Guard Accents (ea)
$ 89.99
C. PHANTOm COVERS
for road star
CHROmE YOuR ENTIRE VISIBLE
SwINGARm IN mINuTES!
Add the finishing touches to the tail end of your swingarm & smooth out
those lines. These little beauties cover up the axle, adjustment bolts, &
rough casting in one easy step.
8229 Fits: All '99-'12 Road Star (except Warrior) (pr) Note:
Right side on '07-'12 Models requires aftermarket exhaust with 1"
clearance from axle nut.
$
8665 Fits: All ’99-‘12 Road Star (except Warrior) with stock 79.99
exhaust or other that covers right rear axle bolt (pr)
Note: When checking for appropriate clearance, please remember swingarms move
separate from your exhaust mounts. Compress & extend suspension for proper clearance.
B. SwINGARm COVERS for road star
Want the appearance of an expensive chrome swingarm without the hassle of tearing apart the back end of your bike?
Chrome your whole visible swingarm with our Swingarm Cover Kit & add that extra shine in minutes for a fraction of the
price.
8262 Fits: All ’99-’12 Road Star (except Warrior) (set)
Note: Right side on ‘07-’12 Models requires aftermarket exhaust with 1” clearance from axle nut.
$
8664 Fits: All ’99-‘12 Road Star (except Warrior) with stock exhaust or other that covers right 149.99
rear axle bolt (set)
Note: When checking for appropriate clearance, please remember swingarms move separate from your exhaust mounts. Compress & extend suspension for
proper clearance.
B
A B
8262
D
8229
$ 149.99
C E
$ 69.99
W W W . K U R Y A K Y N . C O M

E
D. BOOmERANG FRAmE TRIm for road star
Chrome your rear frame supports with smooth elegant beauty the simplest
way possible! These metal covers bolt directly over your bland frame &
include all the hardware you will need for a seamless installation. You’ll get
the look of a custom chromed frame for a fraction of the cost!
Fits: All ‘99-’12 Road Star 1600/1700 Models (except Warrior)
E. FRONT DRIVE PuLLEY COVER for road star
Customize your Road Star & add some class with the look of motion to your front drive
pulley cover. Installation takes only seconds.
Fits: All ‘99-’12 Road Star 1600/1700 Models (except Warrior)
8960 Front Drive Pulley Cover (ea)
D
8662 Boomerang Frame Trim for Road Star (set)
$ 39.99
ADD THE LOOK OF mOTION!
$ 139.99
A
8 6 6 . 2 7 7 . 9 5 9 8 183
B
D
C
BIKE MAPS
GOLDWING
CAN-AM
SPORT BIKE
LIGHTING
ACCESSORY
MOUNTS
HANDLEBAR
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR CLEANERS
MISC
INDEX

Zombie Medallion
pg 173
184
REAR END
FOR YAMAHA
A
A. SIDE COVER ACCENT for yamaha
A touch of chrome in just the right place to accent an area that usually
goes unnoticed. Featuring a stylish ribbed design & made from
lightweight ABS, this cover uses ultra strong VHB tape for a secure hold
& quick installation.
Fits: All ’08-‘12 Yamaha Raider Models & '06-'12 Roadliner,
Stratoliner & Deluxe
8944 Side Cover Accent for Yamaha (ea)
$ 39.99
D
A A B
C
B. TOP BELT GuARD for yamaha
Simple elegance. This fully chromed replacement guard with
its turned-down end & stylish side accents only enhance the
original lines of the rear end. Easy two bolt installation.
Fits: All ’08-‘12 Yamaha Raider Models & '06-'12 Roadliner,
Stratoliner & Deluxe
8940 Top Belt Guard (ea)
$ 79.99
W W W . K U R Y A K Y N . C O M
B

License Plate Bracket
pg 189
D
Custom Bullet
Turn Signals
pg 103
Covers Left
Side Only
C
C. SwINGARm AxLE ADjuSTER COVER for raider
This two-piece creation was not only designed to conceal but also gracefully highlight
the trailing edge of your swingarm without being too overbearing. The removable center
allows access for belt adjustments when needed. Select the original or short cover to suit
your style & be amazed. (Sold individually)
Fits: All ‘08-‘12 Yamaha Raider Models - Fits both left & right side of swingarm (sold
individually)
Note: Only P/N 8942 installs on right side with Vance & Hines Exhaust.
8941 Swingarm Axle Adjuster Cover (ea)
8942 Short Swingarm Axle Adjuster Cover (ea)
8941
8942
COVERS BOTH SIDES OF YOuR SwINGARm!
LOOKS GREAT WITH...
licEnsE platE brackEt
Replace your sub fender with our uniquely
styled replacement.
SEE PG 189
$ 89.99
$ 69.99
8942
D. BOOmERANG FRAmE COVER for yamaha
A renowned Küryakyn parts designer once said, “Chrome won’t get you home, but you’ll
look good when you get there.” This natural transition covers the black frame rails with a
flash of chrome that catches the eye & provides a more flowing appearance. One of the
most aesthetically pleasing additions you can make to these already beautiful motorcycles.
Fits: All ’08-‘12 Yamaha Raider Models & '06-'12 Roadliner, Stratoliner & Deluxe (Covers
left side only)
8943 Boomerang Frame Cover (ea)
ALSO AVAILABLE
$ 59.99
1.TAPPET BLOCK COVERS
PG 174
2.CHROmE FORK PROTECTOR COVERS
PG 168
8 6 6 . 2 7 7 . 9 5 9 8 185
BIKE MAPS
GOLDWING
CAN-AM
SPORT BIKE
LIGHTING
ACCESSORY
MOUNTS
HANDLEBAR
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR CLEANERS
MISC
INDEX

BOOmERANG FRAmE COVERS
for v star 650 & 1100
Easily installed, these show-chromed, die-cast frame covers make artwork
out of a part of your bike that would otherwise fade into the background.
The kit for the V Star 1100 includes a pair of upper frame covers that
smooth the transition from the Boomerang Frame Cover to the fender.
$
8236 Fits: All V Star 650 Models (pr) 109.99
$
8237 Fits: All V Star 1100 Models (pr) 169.99
8286
REAR END
FOR V STAR
SHAFT DRIVE COVER for v star 650 & 1100
U.S. Patent D549,621
Give the rear differential the effect of a chromed housing
at a fraction of the cost. Our Shaft Drive Cover integrates
nicely with our Phantom Covers. Easy add-on with a
two-bolt installation.
Fits: ’99-’09 V Star 1100 & ’98-’11 V Star 650 Models
8286 Shaft Drive Cover for V Star (ea)
mID-FRAmE COVERS
for v star 1100
Turn that drab black frame tube under your
seat into a real eye catcher. When added to
our Boomerang Frame Cover it looks like you’ve
chromed the whole frame! Quick & simple to install.
8255 Fits: All ’99-’09 V Star 1100 Models (pr)
186
8286
8236
$ 69.99
8203
$ 89.99
CLuTCH CABLE
ADjuSTER COVER
PHANTOm COVERS
for v star 650 & 1100
Turn a hodge-podge of fasteners, frame tubes, axles, hubs
etc. into one smooth-sculpted chrome area. The kit includes
covers to hide the bolt heads that secure the drive housing to
the swingarm.
Fits: ‘98-’11 V Star 650, ‘99-’09 V Star 1100 (‘06-’11 V Star
650 & 1100 right sides require aftermarket exhaust that allows
3/4” clearance from exhaust mount bracket & axle nut)
8203 Phantom Covers for V Star (pr)
Note: When checking for appropriate clearance on ‘06-‘11 Models please
remember swingarms move separate from your exhaust mounts. Compress &
extend the suspension for proper clearance.
Hide the crude, zinc-plated cable adjuster!
Installs with easy-to-handle spring clips.
2017 Fits: All Kawasaki 800
Vulcan (ea)
2023 Replacement Spring
Clips for P/N 2017 (pr)
8237
8286
2017
$ 41.99
$ 2.99
$ 79.99
FERRuLE COVER
for v star
Here’s a little flash of chrome for V
Star Speedo cables. Just slip it into
place & tighten the set screw.
2024 Fits: V Star 650
Models (ea)
8203
2024
W W W . K U R Y A K Y N . C O M
$ 19.99

L.E.D. LAYDOwN CuRVED
LICENSE PLATE for victory & universal
Nobody likes to have a license plate, but we all have to have one. So here is the solution to make it look good,
maintain functionality, & remain legal all on a simple bolt on package. This curved plate frame features L.E.D.
backlighting & a 15 degree mounting angle that flows with the lines on your bikes rear fender.
Fits: '10-'12 Victory Cross Roads & Cross Country, Universal, Bolts to flat plate mount (Widest mounting slot is 5"
wide) for 4"x7" plate
7688 Laydown Curved License Plate Frame (ea)
Compliant with FMVSS#571.108 & marked SAE DOT L 11.
LICENSE PLATES
$ 109.99
FuLL LICENSE PLATE
ILLuMINATION!
P/N 7688 & 9198
uSE BACKPLATE SHOwN
CuRVED TIP-BACK
LICENSE PLATE FRAmE
Add the Curved Tip-Back License Plate Frame & smooth out
the back of your fender. With 8˚ of angle & a curved frame,
this chrome beauty holds a 4” x 7” plate & bolts directly to
your stock OEM license plate mount.
Fits: Bolts directly to flat stock OEM license plate mount.
Widest mounting slot is 5" wide.
9198 Curved Tip-Back License Plate Frame (ea)
Note: Doesn't fit VT1300 Stateline or Interstate.
works great on short
bobtail fenders too!
Side
View
$ 69.99
8 6 6 . 2 7 7 . 9 5 9 8 187
BIKE MAPS
GOLDWING
CAN-AM
SPORT BIKE
LIGHTING
ACCESSORY
MOUNTS
HANDLEBAR
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR CLEANERS
MISC
INDEX

188
CuRVED LAYDOwN
LICENSE PLATE mOuNT
The rear fenders on today’s Cruisers are very
impressive. The license plate bracket & reflectors are
a different story. Our streamlined License Plate Mount
holds a 4" x 7” plate & is truly the final touch needed.
Such a difference for so little money.
Fits: ’03-’09 VTX1300 Retro/S/T or ’02-’08 VTX1800
Retro/S/T Models
9171 Curved Laydown
License Plate Mount (ea)
$ 79.99
wORKS GREAT wITH
RuN-TuRN-BRAKE
CONTROLLER
PG 100
CuRVED LICENSE PLATE FRAmE
wITH DuAL ACCENT LIGHTING
With its gentle curved contour & snug, fender-hugging mount, this
license plate frame has a distinctive look all its own. For even more
sizzle, red L.E.D. accent lights operate in run/brake, or run/turn modes.
White L.E.D.’s provide additional plate illumination at night. A perfect
complement to Run-Turn-Brake Controllers this plate ties right in for all 3
functions. Designed to fit 4” x 7” plates.
Fits: ’03-’09 VTX1300 Retro/S/T, ’02-’08 VTX1800 Retro/S/T Models &
Universal Lay Down Applications
3166 Curved License Plate Frame with Dual Accent Lighting (ea)
Note: Universal applications requires drilling holes in fender.
W W W . K U R Y A K Y N . C O M
$ 139.99

FuLL LICENSE PLATE ILLuMINATION!
L.E.D. LIGHTED LICENSE PLATE FRAmE
wITH TRI-LIGHT Patent Pending
Now you can add additional lighting & hide that ugly stock license plate mount at the same time. This great
looking curved frame features a white L.E.D. license plate light & three red strip lights with running & brake
functions all wrapped in a brilliant chrome finish. Designed to mount to the existing factory license plate
bracket, installation is simplified, & with 8 degrees of tip back the rear of the bike will be transformed.
Fits: Universal: Bolts directly to flat stock OEM license plate mount (Requires 3" of clearance for Tri-Light)
3152 L.E.D. License Plate Frame with Tri-Light (ea)
Compliant with FMVSS#571.108 & marked SAE DOT L 11
SuB-FENDER
LICENSE PLATE BRACKET
with l.e.d. curved frame
The best single way to improve the looks of
this sweet ride is to fully remove & replace the
OEM billboard with our Curved License Plate
Frame. The compact brackets clean up your
rear end & allow stock, custom, or Silver Bullet
Turn Signals to be installed. The gleaming
chrome frame is illuminated with cool white
L.E.D.’s built right in. Now that’s more like it!
Fits: All ‘08-‘12 Yamaha Raider Models (Holds
a 4" x 7" Plate)
9257 License Plate Bracket with
L.E.D. Curved Frame (kit)
$ 189.99
Note: Turn signal mounts allow reinstallation of stock turn
signals or others that mount with a 5/16” bolt or stud.
$ 149.99
tri-light can be
mounted on top
or bottom!
BOTH RuNNING & BRAKE
FuNCTION
wORKS GREAT wITH
OuR uNIVERSAL & BuLLET
TuRN SIGNALS
PG 103-104
8 6 6 . 2 7 7 . 9 5 9 8 189
BIKE MAPS
GOLDWING
CAN-AM
SPORT BIKE
LIGHTING
ACCESSORY
MOUNTS
HANDLEBAR
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR CLEANERS
MISC
INDEX

9166
LICENSE FRAmE
& BACK PLATE SET
Our chrome frame & back plate
will dress up your license plate
when using the stock bracket.
Fits: 4” x 7” Plates
9166 License Frame &
Back Plate Set
Note: Acorn nuts not included.
LIGHTED
LICENSE PLATE FRAmE
9165
This chrome die-cast frame incorporates two high
intensity light bulbs that are wired separately. Wire
one each to your brake & tail lamp circuits or
together for an extra bright stop or running light.
Includes integrated white light for plate illumination.
Fits: 4” x 7” Plates
$
9167 Lighted License Plate Frame (ea) 49.99
Note: Not intended to replace O.E. brake or taillight.
190
NEW BRIGHTER FuLL LICENSE PLATE ILLuMINATION!
$ 21.99
LAYDOwN LICENSE HOLDER
Designed to replace Harley’s standard 3-bolt
license plate bracket, this baby streamlines your
fender by tilting the plate back. Kit includes
rubber wedge so you have an option as to how
far the plate lays down.
Fits: Universal for Custom Applications (Holds a
4" x 7" Plate) License Plate Frame not Included
Note: May require drilling holes in fender.
$
9165 Laydown License 39.99
Plate Holder (ea)
L.E.D. LIGHTED CuRVED
LICENSE PLATE FRAmE
for aero 750 & custom applications
Finish off those clean lines of the Aero with this custom Curved
License Plate Mount. Solid metal parts, L.E.D. lights, & curved
design smooths out the lines of the bulky stock mount. Simple
installation uses the stock mounting holes. (Holds a 4" x 7" Plate)
Fits: All ’04-’12 Honda 750 Shadow Aero Models & Universal
Custom Applications
9255 L.E.D. Lighted Curved
License Plate Mount (ea)
Note: Universal applications may require drilling holes in your fender.
Compliant with FMVSS#571.108 & marked SAE DOT L 11
9167
$ 119.99
9164
3160 3161
SwEPT EAGLE license plate frame
BALL-mILLED LICENSE PLATE FRAmES
This contemporary eagle license plate frame can
be the final touch you need.
3161 Fits: Universal 4”x 7” Plates (ea)
LONE EAGLE license plate frame
Show your American pride!
3160 Fits: Universal 4”x 7” Plates (ea)
$ 49.99
The one thing most custom license plate frames have in common is they’re too
small to fit some of the state’s license plates! This frame is offered in two sizes
to fit 4-3/8” x 8” & 4” x 7” plates. Depending on which plate you’re working
with, some minor modifications may still be necessary but this will make many
installations much easier. Glistening chrome finish with ball-milled accents.
$
9164 Large License Plate Frame (ea) 29.99
$
9163 Small License Plate Frame (ea) 29.99
W W W . K U R Y A K Y N . C O M
$ 49.99

lit/
unlit
9251
NEW BRIGHTER
FuLL LICENSE PLATE
ILLuMINATION!
HOW TO ORDER:
1. SELECT LICENSE HOLDER STYLE
2. SELECT REQUIRED MOTORCYCLE SPECIFIC MOUNT CLAMP
9252
TAILLIGHT CAN BE INSTALLED
ON TOP OR BOTTOm!
9252
L.E.D. CuRVED SIDE
mOuNT LICENSE HOLDERS
In the past, if you wanted a cool, custom side-mount license plate you paid
through the nose. Our product brings the price down to reality without
compromising style & function. Choose your plate then get the correct Mounting
Clamps. Sized to fit 4” x 7” plates only.
1
LICENSE HOLDERS
9253 Chrome Curved Horizontal Side Mount (ea)
9251 Chrome Curved Vertical Side Mount (ea)
9252 Chrome Lighted Curved Vertical Side Mount with Taillight (ea)
3125 Gloss Black Curved Horizontal Side Mount (ea)
Compliant with FMVSS#571.108 & marked SAE DOT L 11
2
$ 119.99
$ 119.99
$ 159.99
$ 119.99
Note: Not intended for use with saddlebags. Please check local laws regarding side mount license
plates before ordering. Mount Clamps required for installation - Sold separately (below).
mOuNT CLAmPS
Required for installation of Küryakyn Side Mount License Holders.
chrome
3174 Fits: All Honda VTX1300/1800 (ea)
3175 Fits: Yamaha Road Star without swingarm covers (except Warrior)
& other motorcycles with 1-1/4” diameter swingarms (ea)
3176 Fits: Yamaha V Star 1100/650 (ea)
3177 Fits: Yamaha Road Star (except Warrior) with Küryakyn Swingarm
Covers (P/N 8262 & 8664) (ea)
3182 Fits: All Kawasaki ‘07-’12 Vulcan 900 Models & All ‘04-’10 Vulcan
2000 Models (ea)
gloss black
3120 Fits: VTX 1300/1800 (ea)
3125
9253
3121 Fits: Yamaha Road Star without swingarm covers (except Warrior)
& other motorcycles with 1-1/4”diameter swingarms (ea)
3122 Fits: All Kawasaki ‘06-’12 Vulcan 900 Models & All ‘04-’10 Vulcan
2000 Models (ea)
Note: Please check local laws regarding side mount license plates before ordering.
3175
$ 32.99
$ 31.99
$ 31.99
$ 32.99
$ 32.99
$ 32.99
$ 32.99
$ 32.99
8 6 6 . 2 7 7 . 9 5 9 8 191
BIKE MAPS
GOLDWING
CAN-AM
SPORT BIKE
LIGHTING
ACCESSORY
MOUNTS
HANDLEBAR
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR CLEANERS
MISC
INDEX

192
9399
A. LICENSE PLATE HELmET
LOCK wITH mOuNT
Lights Not Included
Add this License Plate Helmet Lock & conveniently
lock your helmet to your motorcycle. The simple little
mounting plate easily bolts to the back of almost any
motorcycle & allows the easiest access for locking your
helmet.
4248 License Plate Helmet Lock (ea)
Note: Will not install with Curved License Plate Frames or Swept/
Lone Eagle License Plate Frames.
$ 49.99
B. LICENSE PLATE mARKER LIGHT/
TuRN SIGNAL mOuNT
Mount auxiliary marker lights or turn signals to your
license plate. This simple system mounts directly to the
back of your license plate with support backing plate &
two side mount brackets. The side mount brackets have a
3/8” hole & will accept Küryakyn Silver Bullets or L.E.D.
Mini Bullets (See pgs 103-104).
Note: Great option for allowing the mounting of saddlebags on bikes
that need to relocate turn signals. Will not work with Küryakyn
Curved License Plate Frames.
4247
License Plate Marker
Light Mount (ea)
$ 39.99
L.E.D. LICENSE
PLATE BOLT LIGHTS
Light up your license plate whether it’s in the stock
location or custom mounted with these white L.E.D.
bolt lights. You won’t find a cleaner license plate
lighting option with a simpler installation.
9199 L.E.D. License Plate Bolt Lights (pr)
Note: 1/4”-20 Mounting Stud. Chrome Frame sold separately (P/N 9163 - pg 190).
Not intended for use with Küryakyn Curved Frames.
L.E.D. LICENSE PLATE ILLumINATORS
with red accent lights
Each License Plate Illuminator has two L.E.D.’s. The white L.E.D. lights up the license plate &
the rear-facing red L.E.D. can function as an auxiliary running light, turn signal, or brake
light for added visibility. The 1/4”- 20 mounting stud makes it simple to bolt them on, wire
them in, & ride on!
9399 L.E.D. License Plate Bolt Lights with Red Accent Light (pr)
Not intended for use with Küryakyn Curved Frames.
D. INSPECTION PLATE
This small chrome display bracket mounts cleanly in any
location dictated by local or state regulations. Now you don’t
have to mess up a nice paint job or chrome surface with some
cheesy government sticker. Universal fitment.
9168
9162
Inspection Plate
3-1/2” x 3-1/2” (ea)
Texas Inspection Plate
2-7/8” x 4” (ea)
$ 46.99
$ 46.99
$ 19.99
$ 34.99
A B C D
C. TuRN SIGNAL RELOCATOR KIT
Get the best of both worlds! Now you can mount a set of Edge
Saddlebags & keep your stock turn signals. This kit takes all the guess
work out of relocating your stock signals by moving them from the
fender to the license plate area. Side mount brackets have several
mounting points for lights & will accept most OEM rear turn signals.
$
3155 Turn Signal Relocator Kit (kit) 49.99
Note: Will not work with Küryakyn Curved License Plate Frames.
works well with:
• 5/16” or 3/8” small & large silver bullets
• p/n 5032 turn signal
• küryakyn mini bullets
W W W . K U R Y A K Y N . C O M