Dynamic & Static Rated Fire Dampers, Ceiling Radiation Dampers
Dynamic & Static Rated Fire Dampers, Ceiling Radiation Dampers
Dynamic & Static Rated Fire Dampers, Ceiling Radiation Dampers
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Codes/Listings/Approvals<br />
Test Standards & Certifications<br />
UL555<br />
This standard governs fire dampers which are intended for use where air<br />
ducts penetrate or terminate at openings in walls or partitions, in air transfer<br />
openings in partitions, and where air ducts extend through floors as<br />
specified in the Standard for Installation of Air-Conditioning and Ventilating<br />
Systems, NFPA 90A. In a fire emergency the fire damper is designed to<br />
close and prevent the spread of fire from one side of the wall or partition<br />
to the other. Testing includes cycling, salt spray, dust loading, dynamic<br />
closure, fire endurance, and hose stream.<br />
4<br />
UL555C<br />
This standard governs ceiling dampers which are intended for use in air<br />
handling duct outlets which penetrate membrane ceilings of hourly fire<br />
rated resistive assemblies, or for installation in the ceiling membrane of<br />
such assemblies which utilize the plenum space for return air.<br />
AMCA<br />
The AMCA Certified Rating Program seal assures you that a product line has<br />
been tested to the appropriate AMCA standards in accordance with a legal<br />
license agreement and that the manufacturer's catalogued certified ratings<br />
have been submitted to the AMCA staff for approval prior to publication.<br />
Warnock Hersey<br />
The Warnock Hersey is among the most well-recognized and respected<br />
North American marks of compliance for building codes, association<br />
criteria, and product safety and performance standards. Warnock Hersey,<br />
like UL, is an independent agency which evaluates and tests products to<br />
recognized standards including those dictated by UL, NFPA, and ASTM.<br />
Codes<br />
In addition to the UL, AMCA, California State <strong>Fire</strong> Marshal and New York MEA, Greenheck fire and ceiling<br />
radiation products meet requirements established by:<br />
200%<br />
National <strong>Fire</strong> Protection Association (NFPA Standards 90A, 92A, 92B and 0 )<br />
BOCA National Building Codes SBCCI Standard Building codes IBC International Building Codes<br />
Greenheck Fan Corporation<br />
COMBINATION FIRE/SMOKE DAMPERS<br />
ICBO Uniform Building Codes ICC International Code Council<br />
Greenheck Fan Corp. certifies that the models DFD-2 0,<br />
DFD-230, DFDTF-2 0, SEDFD-2 0, and SSDFD-2 0<br />
shown herein are licensed to bear the AMCA Seal.<br />
The ratings shown are based on tests CSFM and Listing procedures #3225-0981:103<br />
performed in accordance with AMCA Publication #3230-0981:104 5<br />
and comply with the requirements of the AMCA #3225-0981:109<br />
Certified<br />
Ratings Programs. The AMCA Certified Ratings Seal #3230-0981:110<br />
applies to air performance ratings only. NYC MEA #260-91-M<br />
Complies with UBC<br />
Listings / Approvals<br />
UL Category California State <strong>Fire</strong> Marshal<br />
Greenheck Fan Corporation<br />
DFD, FSD, SSDFD, SSFSD,<br />
ODFD, OFSD, OSSDFD, OSSFSD<br />
SERIES COMBINATION<br />
FIRE/SMOKE DAMPERS<br />
COMBINATION FIRE/SMOKE DAMPERS<br />
456935<br />
New York City MEA<br />
(all models)<br />
EMME<br />
R 33 7<br />
DFD-2xx<br />
All DFD / FD ( /2 hour)<br />
All DFD / FD (3 hour)<br />
3225-098 : 03<br />
3225-098 : 02<br />
3225-098 : 07 260-9 -M<br />
CABS CRD- / CRD-2 3226-0987: 0<br />
R 3446 CRD-60 3226-098 :
Change language