BL Precision Bearings: Radial Ball Bearings ... - Maryland Metrics
BL Precision Bearings: Radial Ball Bearings ... - Maryland Metrics
BL Precision Bearings: Radial Ball Bearings ... - Maryland Metrics
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
20<br />
MOUNTED BALL BEARING UNITS<br />
PILLOW <strong>BL</strong>OCKS<br />
UCP, UCPX, HCP, UCPK,<br />
HCPK, SAP, SBP<br />
The most extensively used<br />
bearing units. UCP, UCPK and SBP are fixed to<br />
the shafts with set screws in the inner ring. HCP<br />
and SAP are fixed to the shafts with eccentric<br />
locking collars. UPCK and HCPK are low base.<br />
HIGH CENTER HEIGHT PILLOW <strong>BL</strong>OCKS<br />
UCPH, HCPH<br />
Pillow blocks with higher center<br />
heights.<br />
TAPPED BASE PILLOW<br />
<strong>BL</strong>OCKS<br />
UCPA, HCPA<br />
Compact pillow blocks for limited<br />
space applications. Mounting is<br />
done with threaded bolts into<br />
the base.<br />
FOUR-BOLT SQUARE FLANGE UNITS<br />
UCF, UCFX, HCF, SAF, SBF<br />
Units bolted to the sides of<br />
equipment with four bolts. Set<br />
screws and eccentric locking collars<br />
have the same mounting methods as<br />
housings with the “P” suffix.<br />
ROUND FLANGE UNITS<br />
UCFC, HCFC<br />
Four-bolt units installed where<br />
concentricity is required.<br />
TWO-BOLT FLANGE UNITS<br />
UCFL, UCFLX, HCFL, SBFL<br />
Housing saves space and<br />
weight and is installed with two<br />
bolts.<br />
TWO AND THREE-BOLT FLANGE UNITS<br />
SALF, S<strong>BL</strong>F<br />
LF-type two-bolt flange units<br />
are used with SA and SB<br />
inserts only.<br />
SAFCT, SBFCT (ductile iron),<br />
SALFTC, S<strong>BL</strong>FTC (cast iron)<br />
Three-bolt flange units are used<br />
with SA and SB inserts only.<br />
FLANGE BRACKET UNITS<br />
UCFB<br />
This mounting has three set holes<br />
on only one side of the flange.<br />
Used where mounting space is<br />
limited and the housing can be<br />
fixed on one side only.<br />
ADJUSTA<strong>BL</strong>E FLANGE UNITS<br />
UCFA<br />
Unit has a two-bolt base with<br />
one adjustable side, enabling<br />
the distance from the center of the<br />
shaft to be varied.<br />
TAKE UP UNITS<br />
UCT, HCT, UCST, UCSTX<br />
Used where the center of the main<br />
shaft requires free alignment.<br />
PRESSED HOUSING PILLOW <strong>BL</strong>OCKS<br />
SAPP, SBPP<br />
Lightweight unit consisting of two<br />
pressed steel plates. Used in<br />
equipment where the rotating<br />
speed is low or the machine<br />
has a light load. Inserts for pressed housings are<br />
usually SA or SB series.<br />
PRESSED HOUSING ROUND FLANGE<br />
UNITS<br />
SAPF, SBPF<br />
Lightweight housing consisting of<br />
two pressed steel plates mounted<br />
with SA or SB inserts.<br />
PRESSED HOUSING FLANGE<br />
UNITS<br />
SAPFT, SBPFT<br />
Has the same function as pressed<br />
round flange housings. Used<br />
where mounting space is limited.