Flowgraph View - Kodak

Setting Up Your System
SEQUEL Chroma 4/C Serial Sensor for CRT Monitors
Use this serial sensor on CRT monitors.
Attach to monitor
with suction cups
Connect to serial
port on your
computer
When prompted by the Display Manager System, attach the sensor as shown
here.
To attach the sensor:
1. Press the sensor firmly to the
screen being careful not to press
too hard. Center it within the
square.
2. Make sure that all suction cups
are pressed against the monitor. If
any of the suction cups come
loose, the results may be
unreliable and the process should
be repeated.
3. If the sensor falls off the monitor,
reattach it and restart the process.
KODAK Look Manager System User Guide V2.2 17