Operator Terminal System Manual - 11276916.pdf

System Manual – DOP11A Operator Terminals
Unit Information, Installation and Hardware
Introduction
Programming You program the operator terminal via PC and the HMI-Builder software.
The operator terminal is to a large extent object-oriented, i.e. first an object is selected
and then the function the object is to have. All types of signals are defined on this
principle.
The programmed project is stored in the operator terminal.
Connection of the terminal to the SEW frequency inverter
10575AXX
There are many advantages in using a terminal together with the controller system:
The user does not need to make any changes or additions in the existing controller
programs
and the terminal does not block any of th e inputs or outputs in the controller system.
Overview of controller functions will be optimized, e.g. time control and alarm
handling.
3
11