Operator Terminal System Manual - 11276916.pdf

I
Programming
7 Programming with the programming software
0
Terminal options
Option Description
BG Click on [BG] to define the background color of the terminal.
FG Click on [FG] to define the foreground color of the terminal.
Window Here you can select the window color of the terminal.
Screen saver time Enter the screen saver activation time in minutes. The default setting is 0
(min)
which means the screen saver is disabled. A screen saver extends the life of
your monitor.
Key delay (ms) Time interval in milliseconds between 2 hits of the same key before the cursor
automatically moves to the next position. Is used when ASCII characters (A-
Z, etc.) are entered.
See the section "Alphanumeric function" in chapter 5.2 "Terminal functions".
Key tone Define whether the terminal produces a signal tone when a key is pressed.
Key repetition Specifies whether a function is repeated as long as a key is being pressed.
This does not apply to function keys and the entry of alphanumeric characters
(A-Z, etc.).
Trend settings General trend settings are made in this field.
Save modified pat- Only saves modified patterns in the trend if the value has changed since the
terns
last measurement.
Save all patterns Saves all patterns in trends even if the value has not changed since the last
measurement. These parameters affect all defined trends.
FTP delimiter The terminal can save the contents of all files that are created in the terminal
and that can be accessed via FTP using different separators. The content of
recipe or trend files, for example, can be delimited using tab, semicolon or
comma.
See also chapter 9.3 "Network functions in the terminal".
Alarm settings General alarm list settings are made in this field. For further information, refer to chapter
8.2 "Alarm handling".
110 System Manual – DOP11A Operator Terminals