Operator Terminal System Manual - 11276916.pdf
Operator Terminal System Manual - 11276916.pdf
Operator Terminal System Manual - 11276916.pdf
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
I<br />
Programming<br />
7 Graphic display and control<br />
0<br />
Digital objects Digital objects, text objects, symbol objects and filled objects change their state when<br />
pressing the Enter key. If the functions for incrementing and decrementing are linked to<br />
function keys, the signal linked to the object of these keys will be enabled or reset.<br />
Analog objects ASCII objects<br />
Move the cursor over the object and press the Enter key. Enter the required text and<br />
confirm the entry by pressing the Enter key.<br />
Message objects<br />
Move the cursor over the object and press the Enter key. Doing so opens a selection list<br />
with all available states. Select the required state and press the Enter key. This way, you<br />
define the analog signal linked to the object.<br />
Multiple selection objects<br />
Move the cursor over the object and press the Enter key. This opens a selection list with<br />
all available states. Select the required state and press the Enter key. This way, you define<br />
the analog signal linked to the object.<br />
Numeric objects<br />
To control a numeric object, enter a value and press the Enter key. If the entered value<br />
is too high or too low, the possible minimum or maximum value for the object will be<br />
displayed. This information will also be issued if you press the Enter key while the object<br />
is maneuverable.<br />
Numeric table objects<br />
If a table object is highlighted, press the Enter key to select the first table row. You can<br />
now move the cursor over the cells using the arrow keys. Change the value of a selected<br />
cell and press the Enter key.<br />
Slider objects<br />
You control the object using the arrow keys by moving the cursor over the object and<br />
pressing the Enter key. You can now increase or decrease the value using the arrow<br />
keys. Confirm your entry by pressing the Enter key. The value increases or decreases<br />
by the number that corresponds to the object setting under scale ticks. Complete the<br />
process by pressing the Enter key.<br />
The object can also be controlled using the functions for incrementing and decrementing.<br />
The object must be linked to function keys for this purpose. See chapter 8.10<br />
"Function keys".<br />
154 <strong>System</strong> <strong>Manual</strong> – DOP11A <strong>Operator</strong> <strong>Terminal</strong>s
Change language