Operator Terminal System Manual - 11276916.pdf

System Manual – DOP11A Operator Terminals
Operation and Service
Project transfer with PC and HMI-Builder
3. Use the [File] / [Open] function to open the project file you would like to transmit to
the operator terminal.
4. In the selection field [Transfer] / [Comm. settings], select the communication
connection [Use serial transfer] and enter the necessary parameters:
Serial transfer when using the PCS11A programming cable.
Enter following information:
Communication port of the PC (e.g. Com1)
Baud rate (default 57,600)
Timeout period (free entry, default 10,000 ms)
Number of retries in case of communication problems (default 3)
I
0
10377AEN
10378AEN
6
45