Operator Terminal System Manual - 11276916.pdf

I
Programming
7 Creating a project
0
Menu From the menu bar you can reach a number of drop-down menus.
Menu Description
File Contains functions that affect the entire project.
Edit Contains, among others, the following functions:
Cut
Copy
Paste
The following menus can be invoked:
Block manager
View
Alarm handling
Symbol manager
Functions In this menu you can configure the function keys, LEDs, passwords and macros.
Alarm texts are entered and alarm groups are defined in this menu as well.
Setup Here you will set the basic configuration for the terminal.
Object Is available in the managers only and holds all objects. The objects are also included
in the toolbox.
Layout Is available in graphic block manager only and includes functions for positioning of
objects in graphic blocks.
Block manager Settings for visual representation of block manager
Transfer The functions in the Transfer menu are used to transfer projects between the programming
software and the terminal.
Window Contains all general Windows functions. You can also make grid settings and define
the search path to external programs, such as Paintbrush.
Help Contains the help functions for the program.
Status bar The status bar is located at the bottom of the HMI-Builder program window. In the [View]
menu there is a function to show / hide the status bar.
The left part of the status bar describes the menu function selected in the menu. A short
description of the function the cursor points to is shown for the functions in the toolbox.
The right part of the status bar indicates which of the following keys are activated:
OVR Overwrite (Paste key)
CAP Caps Lock
NUM Num Lock
Coordinates, line and column, in the block manager are also shown.
Figure 26: Status bar
53108AXX
58 System Manual – DOP11A Operator Terminals