Operator Terminal System Manual - 11276916.pdf

Defining the complete
block header
System Manual – DOP11A Operator Terminals
Programming
Programming with the programming software
Parameters Description
Block name You can enter a name for the block in this field. The block name will be displayed in the
Block Manager and in the block list.
Block no. The block number is specified in this field. If the entered number was already assigned to a
block, the defined values will appear automatically. Block 0 is automatically created at the
start of the program and must exist in every project.
Block type Select whether you want the block to be a graphic block or a text block.
Block width Define the font size for a text block. The font size cannot be changed for a defined block.
Template Clicking this button inserts a block template or saves the current block as block template.
The [Block header] menu contains basic parameters that apply to each individual block.
The appearance of the block header depends on the selected block type. To define a
complete block header, click the block and select [Block Manager] / [Block Header] from
the menu. The following parameters can be defined in the block header dialog.
Figure 37: Block header
10410AEN
I
0
7
75