Operator Terminal System Manual - 11276916.pdf

I
Programming
7 Programming with the programming software
0
Defining text
blocks
All functions are also available from the menus. For further information on defining and
using the various objects in text blocks, refer to chapter 7.5 "Text-based display and
control".
Maximize
Minimize
ASCII selection list. For selecting characters that cannot be
directly entered using the keyboard.
Static text
The text block manager is a text manager for entering static text. The Windows functions
[Copy] and [Paste] can be used to copy and paste text in a block from one block to
another or from one program to another (e. g. Microsoft Word). This is an easy way of
documenting an application.
Dynamic objects
Dynamic objects can be defined at any text position. Select the object type from the
toolbox or the [Object] menu. This opens a dialog where you can define the object.
The dynamic object is marked with a rhomb (#) followed by one or several hyphens (-)
depending on the position. For further information on defining dynamic objects, refer to
chapter 7.5 "Text-based display and control".
90 System Manual – DOP11A Operator Terminals