particular specifications (road works) - CIDCO Maharashtra Ltd.

CIDCO OF MAHARASHTRA LTD
C.A.No.01/CIDCO/SE(KHR)/EE(KHR-I)/2010–11 Pg. No. 515
The exposed faces of the rubble work are to be similarly pointed
(When described as to be pointed) but the joints shall be raked out
to a depth of 20mm and shall be irregular in direction.
The above description of pointing shall apply generally to all classes
except only as the pointing material which may in certain cases to
be otherwise described in this specification.
g) Bonding of old work with new work
Wherever any new work meets the old, certain portions of the old
work as may be ordered by the Engineer, shall be cut away in order
that the new work may be properly bonded into the old. No
payment will be allowed to the Contractors for cutting away any
portion of the work done under this contract for the purpose of other
similar work, or in such case for bonding and making good the
same as above described.
h) Cutting holes in new work
Wherever any hole or other communication has to be cut into the
wall or made with a drain or a sewer or a manhole or into or with
other masonry, the hole or communication shall be cut or made
neatly to the requisite size and pipe, tail piece, elbow or other article
or work for which it is required shall be neatly and soundly stopped
around with, or built in cement and sand (1 to 1). The rate of
cutting the hole or that for the work for which the communication is