particular specifications (road works) - CIDCO Maharashtra Ltd.

CIDCO OF MAHARASHTRA LTD
C.A.No.01/CIDCO/SE(KHR)/EE(KHR-I)/2010–11 Pg. No. 281
6.2.9 Rates :
The contract unit rate for wet mix macadam shall be payment in full for
carrying out the required operations including compensation for all
components listed Clause 401.8 of MORT&H Specifications.
7.0 PLATE LOAD TESTS :
7.1 To conduct plate load test on new WMM surface by gravity method,
using girder loading platform, mild steel plate of required size with
minimum thickness of 25 mm and applying heavy loads by sand
bags, pig iron, pig lead etc. to transfer the load to serial plate and to
record the settlement using suitable dial gauges.
The test shall be paid once at one place on one layer till the required
results are achieved irrespective of number of times test carried out.
7.2 To conduct the plate load test on new WMM surfaces, replacing
loading platform by loaded truck and jacking against reaction by
using hydraulic dial gauges to record settlement.
The test shall be paid once at one place on one layer till the required
test results are achieved irrespective of number of times test carried
out.
8.0 TACK COAT
8.1 SCOPE
This work shall consist of application of a single coat of low viscosity
liquid bituminous material to an existing road surface preparatory to
the superimposition of a bituminous mix, when specified in the contract
or instructed by the Engineer.