particular specifications (road works) - CIDCO Maharashtra Ltd.

CIDCO OF MAHARASHTRA LTD
C.A.No.01/CIDCO/SE(KHR)/EE(KHR-I)/2010–11 Pg. No. 327
b) Permissible limits for solids shall be as given below:
Organic : 200 mg/ litre.
Inorganic : 3000 mg/litre
Sulphate (SO4) : 500 mg/litre
Chloride (C1) : 250 mg/litre
Suspended matter : 2000 mg/litre
c) The pH value shall generally be not less than 6, whenever
necessary, test shall be done as per IS 3025.
d) Under no condition, saline water shall be used for any construction
purpose including curing.
1.15.5 Steel Reinforcement :
Steel reinforcement shall be any of the following:
i) High yield strength deformed bars conforming to IS 1786 –
1979/TMT bars of the CIDCO approved make.
ii) Mild steel conforming to IS 432 (Part-I)
1.15.6 Structural Steel
a) All the work of structural steels hall conform to CI. 1900 of
MORT & H Specification.
b) Structural steel shall conform to IS 226 for mild steel, IS 961 for
high tensile steel and IS 2062 for fusion welding quality steel or
IS 1161 for steel tubes for structural use.
c) Finished rolled steel materials shall be free from cracks, flaws,
injurious seams, laps, blisters, ragged and imperfect edges and
other defects. It shall have a smooth and uniform finish and shall
be straightened in the mill before dispatch. They shall be free
from loose mill scale, rust, pitting or other defects affecting its
strength and durability.