INDUSTRIAL GEAR OILS - Petro-Canada

industriaL Gear oiLs
ENDURATEX
Synthetic EP
• Uses advanced synthetic base
oils and additive technologies
to deliver reduced friction,
excellent low temperature
fl uidity and outstanding
oxidative and thermal stability,
which can mean extended fl uid
and component life.
• Available in 150, 220, 320 and
460 grades.
ENDURATEX XL
Synthetic Blend
• Recommended for lubricating
oil fi lled pump jack gearboxes
and other industrial gearbox
applications.
• Excellent low temperature
properties, which allow it to
be used in all but the most
extreme conditions.
• Available in 68/150 and
68/220 grades.
DOES THE OEM SPECIFICATION
rECOMMEND AN ExTrEME
PrESSUrE (EP) OIL?
YES
Does your equipment operate
at very high temperatures?
(up to 100˚C/212˚F)
YES
YES
22
NO
NO
NO
Do you need wide temperature
capabilities?
ENDURATEX EP
• Delivers sustained anti-wear
extreme pressure protection
to industrial gear drives and
bearings.
• Available in 32, 68, 100, 150,
220, 320, 460, 680, 1000,
1500 and 3200 grades.
Do you have high fi lm strength
needs for the industrial gear oil?
YES NO
ENDURATEX
Mild Worm Gear Oil
• Non-EP lubricant for service
in both enclosed worm gear
reducers and reciprocating
steam engines.
• Formulated to provide high fi lm
strength, high fl ash point and
excellent rust and corrosion
protection.
• Available in 400, 680 and 1000
grades.

PErFOrMANCE bENEFITS
• SYNDURO SHB * family of synthetic multifunctional fluids
is formulated for lubricating gears and bearings operating
under mild EP loads over wide temperature ranges.
• TURBOFLO * R&O oils are high quality lubricants designed
for use in steam and gas turbines, as well as circulating
oils systems in a wide range of industrial machinery.
YES
Do you need an R&O (non-EP)
oil for bearing lubrication?
TURBOFLO R&O/Premium R&O
77 Turbine/Circulating Oils
• Primarily recommended for steam and
gas turbines as well as circulating oil
for industrial machinery.
• Minimizes corrosion and oxidation.
• Extended resistance to oil breakdown
caused by air and high temperatures.
• General Purpose R&O Circulating Oils
are available in 10, 22, 150, 220,
320 and 460 viscosity grades.
• General Purpose R&O Turbine &
Circulating Oils are available in 32,
46, 68, 77 and 100 viscosity grades.
SYNDURO SHB
Gear Oil
NO
You need mild EP equipment
protection
• This full synthetic multifunctional
fluid delivers excellent component
protection for equipment
operating at high speed or mild
EP loads over a wide temperature
range during extended service
intervals.
• Higher viscosity grades designed
for worm gear application.
• Available in 32, 68, 150, 220 and
460 grades.
23
• ENDURATEX * EP and Synthetic EP gear oils are high
quality, extreme-pressure lubricants designed for enclosed
industrial gear drives operating under severe load
conditions or in wide temperature extremes.
OTHER PRODUCTS
Product aPPLIcatIon
SuPer Gear
fluid
• designed for industrial gear and
bearing systems operating under
conditions of high loading.
• excellent oxidative and
thermal stability.
• ISo 680.