Smart Infrared Inspection System Field Operational Test - Center for ...

TEMPERATURE DISPLAY BOX
The temperature display box presents the gathered data to the operator. The data is
identified by the side and axle number. The temperature below that identifier is the
number for that axle, side and component. To change which component of the wheel
is being feature in the Temperature Display Box, see below. More information on
using the information displayed here is available in the Alerts section of this manual.
TEMPERATURE DISPLAY MENU
The temperature display menu allows the operator to change the data group that is
being displayed. By clicking on the drop down menu, the operator can switch between
the three components that are measured by SIRIS: tire, brake, or bearing. The
information that the operator looks at should be determined by the issued alert. The
default for this menu is brake.
REALTIME UPDATES
This drop down menu is used to set when the system updates the image window. The
screen could update with new images for every vehicle is measured as it is measured,
only when an alert is issued while a vehicle is being measured, or not at all. The
operator may wish to turn the updates off while studying a previously collected file as
the update will remove the previous inspection images from the screen. If the updates
are set to On, every new vehicle will cause the screen to update. If the Alerts Only is
chosen, the screen updates only when a problem is detected with a passing vehicle.
All files are saved regardless of the setting for Realtime Updates.
48