Smart Infrared Inspection System Field Operational Test - Center for ...

COLLECTED DATA BOX
Each vehicle that passes through the system generates an inspection report. The
Collected Data Box displays all files for the current or loaded session. Each vehicle is
displayed with its photo, recorded time, vehicle number, number of axles, and the
status which will be Completed, Alert, or Incomplete.
An operator can view the wheel images for a vehicle by clicking on its photo.
Information on clearing this data collection can be found in the Tools description.
IMAGE DISPLAY AREA
The Image Display Area is located in the lower half of the User Interface. The images
that are generated by SIRIS are shown here with the determined Regions of Interest (if
enabled and available) and any issued alerts.
The operator can get more detailed temperature information by single clicking on an
image. This will open up a new window with a close up view of that tire. By moving
the pointer around on the image, the operator can see the temperature reading taken by
SIRIS for any specific point. You can close the thermal data window by double
clicking on the image or on the red ‘x’ in the right hand corner.
54