DEUTROFLUX - KARL DEUTSCH
DEUTROFLUX - KARL DEUTSCH
DEUTROFLUX - KARL DEUTSCH
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Reusable<br />
<strong>DEUTROFLUX</strong> -<br />
Spray Bottle<br />
FLUXA Test Block<br />
The FLUXA test block is used to check<br />
die indicating sensitivity of fluorrescent<br />
magnetic particle inspection agent.<br />
It contains a permanent magnet and an<br />
artificial crack whose indicated length<br />
can be read from the engraved scale.<br />
Thus, a quantitative statement of the<br />
indication sensitivity is possible.<br />
Article No.: 9803.001<br />
BERTHOLD-<br />
Testing Device<br />
This reference device is a simple testing<br />
device to check for sufficient field strength.<br />
It is placed onto the workpiece, magnetised<br />
and sprayed together with it. Proper magnetisation<br />
produces an indication of the artificial<br />
cross-shaped crack.<br />
Article No.: 3823.001<br />
Further Accessories<br />
By a few pumping movements before use,<br />
the entire contents can be sprayed. Therefore,<br />
spraying becomes much easier and protects<br />
the environment.<br />
Sizes: Bottle: 310 x 120 mm dia.<br />
Handle to jet: 210 mm<br />
Weight (unfilled): 460 g<br />
Max. volume: approx. 1 l<br />
Max. pressure: 3 bar<br />
Article No.: Bottle 6303.001<br />
<strong>KARL</strong> <strong>DEUTSCH</strong> magnetic particle agents<br />
for crack detection: See FLUXA brochure P 90<br />
<strong>KARL</strong> <strong>DEUTSCH</strong> penetrant agents:<br />
See KD-Check brochure P 99<br />
Reference Block 1<br />
acc. to EN ISO 9934-2 (former MTU<br />
Test Block)<br />
The same task as the FLUXA test block<br />
is fulfilled by the Reference Block 1. It is<br />
residually magnetised and contains a<br />
network of coarse and fine cracks.<br />
Their indication is evaluated.<br />
Article No.: 6904.001<br />
Residual Field Indicator<br />
By using the residual field indicator, the amount of<br />
residual magnetism in a workpiece can be checked<br />
and the position of the magnetic poles be recognised.<br />
For this purpose, the indicator is held with it’s lower<br />
side against the surface to be tested. By moving<br />
and swivelling the indicator, the maximum indication<br />
is found.<br />
Measuring range: ± 5 Gauß<br />
Article No.: 3821.002<br />
ASTM-Centrifuge Tube<br />
To check a fresh batch of inspection<br />
agent for correct concentration.<br />
Article No.: Glass 6901.001<br />
Stand 9804.001<br />
Reference Block 2<br />
acc. to EN ISO 9934-2<br />
It is used like the FLUXA Test Block for<br />
checking the indicating sensitivity of the<br />
magnetic particle inspection agent.<br />
Article No.: 6904.002
Change language