1 AE 452 Aeronautical Engineering Design II Project Report Format ...

AE 452
Aeronautical Engineering Design II
Project Report Format
Instructor: Prof. Dr. Serkan Özgen Due:08.06.2012
1. The project report must not exceed 50 pages. This includes appendices,
figures, tables and drawings. Use single column layout, 12 pt font, 1.5 line
spacing. The figures must accompany the text.
2. Include a table of contents. List of figures or tables is not necessary.
3. The report must start with the requirements.
4. The order of the chapters of the report must follow the order of the Study
assignments. Each chapter of the report must correspond to a Study
assignment. If you have done more than one iteration for a given calculation
or sizing, include only the final one.
5. At the end of the report, a general layout of the airplane must be given with
a sufficiently detailed three-view drawing in the format of “Jane’s All the
World’s Aircraft”. The drawings need not be done with software. Neat, handdrawn
figures will do. Colored drawings, charts and graphs are not mandatory.
6. The references should be given at the end of the report before the
Appendices.
7. All figures, tables, etc. must have appropriate captions. The symbols used
must be explained in the text. There is no need for a nomenclature page.
8. Try to bind the report at least with a plastic spiral.
9. Make sure that each page is numbered.
10. The title page of the report must have the following format:
1

Middle East Technical University
Department of Aerospace Engineering
AE 452
Aeronautical Engineering Design II
Project Report
Conceptual Design Study
of a
Stealth Fighter Aircraft
Date : June 2012
Prepared By : Your Names
Instructor : Prof. Dr. Serkan Özgen
2