SJ Top Load Spec Sheet 10/99 - Boydco.com
SJ Top Load Spec Sheet 10/99 - Boydco.com
SJ Top Load Spec Sheet 10/99 - Boydco.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>SJ</strong> TOP LOAD ACCESSORIES & ADD ONS<br />
Automatic Water Fill: Maintains<br />
water level in tank for<br />
uninterrupted operation.<br />
Part #21-1<strong>10</strong><br />
Service Tray, Tool Basket with<br />
Tools: For convenience in handling<br />
basket and hand scrubbing<br />
parts. Parts #21-170 / 21-175<br />
Temperature Gauge: For<br />
monitoring temperature of<br />
cleaning solutions.<br />
Part #4-0505<br />
Porta Kleen: For processing<br />
wastewater from parts washer.<br />
(shown with wet vac and barrel)<br />
Part #PK-<strong>10</strong>0D<br />
Caster Wheels: For convenience<br />
in moving parts washer<br />
around the shop.<br />
Part #21-120<br />
Hand Detail Scrub Brush:<br />
For hand scrubbing hard-toclean<br />
parts.<br />
Part #21-171<br />
MODEL <strong>SJ</strong>-<strong>10</strong>A,B,C <strong>SJ</strong>-15A,B,C<br />
LOAD WEIGHT 250 lbs (113 kg) 350 lbs (159 kg)<br />
LOAD HEIGHT 15" (38 cm) 18" (46 cm)<br />
BASKET DIMENSIONS 26” x 15” x 7” (66 cm x 38 cm x 18 cm) 32” x 21” x 7” (81 cm x 53 cm x 18 cm)<br />
TANK CAPACITY 64 gallons (242 liters) 80 gallons (303 liters)<br />
WATER PUMP 1.5 hp Centrifugal 2 hp Centrifugal<br />
20 gpm, 40 psi* (76 lpm, 2.8 bar) 35 gpm, 45 psi † (132 lpm, 3.3 bar)<br />
WATER HEATER 4.5 KW Incoloy 6 KW Incoloy<br />
ELECTRICAL 230V 1 ph 27 amps, 230V 3 ph 22 amps, 230V 1 ph 35 amps, 230V 3 ph 27 amps<br />
460V 3 ph 20 amps 460V 3 ph 25 amps<br />
CABINET SIZE LxWxH 42" x 46" x 36" (<strong>10</strong>7 cm x 116 cm x 91 cm) 48" x 49" x 42" (122 cm x 124 cm x <strong>10</strong>7 cm)<br />
DRY WEIGHT 343 lbs (156 kg) 466 lbs (211 kg)<br />
SHIPPING WEIGHT 4<strong>10</strong> lbs (186 kg) 531 lbs (241 kg)<br />
Small Parts Basket:<br />
With lids for holding nuts,<br />
bolts and other small parts.<br />
Part #21-140<br />
Adjustable Thermostat:<br />
Panel mounted for adjusting<br />
temperature up to 190°F.<br />
Part #21-135<br />
<strong>SJ</strong> TOP LOAD SPECIFICATIONS<br />
Note: We are constantly improving and updating our products. Consequently, pictures, features and specifications in this brochure may differ slightly from current<br />
models. This equipment intended for indoor use only. Customer is responsible for any permits, <strong>com</strong>pliance with codes, or other government requirements<br />
associated with the installation, use, or disposal of waste associated with this equipment.<br />
* 30 psi (2.1 bar) with optional filtration system. † 38 psi (2.1 bar) with optional filtration system.<br />
World Headquarters<br />
REGISTERED<br />
MEMBER OF Made in USA<br />
CLEANING EQUIPMENT TRADE ASSOCIATION<br />
WATER CLEANING SYSTEMS<br />
FORM #96-0202 • <strong>10</strong>/<strong>99</strong> • LANDA, INC. • 4275 Pacific Rim Blvd., Camas, Washington 98607 USA<br />
®<br />
www.landa-inc.<strong>com</strong><br />
DISTRIBUTED BY:<br />
Pressure Gauge: For monitoring<br />
pump and filtration system<br />
performance.<br />
Part #4-05042<br />
Automatic Oil Skimmer:<br />
Removes surface oil to keep<br />
cleaning solution viable.<br />
Part #21-180<br />
Metal Tray Dividers: For<br />
stacking flat metal pieces for<br />
more thorough cleaning.<br />
Part #95-07700030<br />
Hour Meter (shown above):<br />
Monitors operation of unit for<br />
maintenance purposes.<br />
Part #4-050822<br />
6KW Heater: For faster temperature<br />
rise of when quick<br />
start up is needed.<br />
Part #21-155<br />
Wastewater Drum Evaporator:<br />
Separate 3000W heating element<br />
reduces disposal costs.<br />
Part #21-190<br />
Pump Upgrades: 2 hp for 35<br />
gpm, 45 psi (132 lpm, 3.3 bar).<br />
3 hp for 50 gpm, 50 psi (189<br />
lpm, 3.4 bar).<br />
AUTOMATIC PARTS WASHERS<br />
TOP LOAD WITH WATER-PROPELLED SPRAY BAR<br />
Model <strong>SJ</strong>-15A<br />
Shown with Porta Kleen<br />
and Optional Accessories Patented<br />
®<br />
<strong>SJ</strong> TOP<br />
LOAD<br />
MODELS<br />
Plant Engineering<br />
PRODUCT<br />
of the<br />
C YEAR<br />
1-YEAR LIMITED WARRANTY • CERTIFIED TO UL SAFETY STANDARDS • ISO-9001 COMPANY<br />
HOT AND COLD WATER<br />
PRESSURE WASHERS<br />
AUTOMATIC AQUEOUS<br />
PARTS WASHERS<br />
ACCESSORIES<br />
AND PARTS
<strong>SJ</strong> TOP LOAD<br />
Built to Last: Entire unit is made<br />
of 12-gauge steel coated with an exterior<br />
epoxy, powder paint for years of<br />
new-like appearance.<br />
Customized Parts Basket:<br />
Several optional parts baskets are<br />
available with lids for holding bolts,<br />
nuts or other small parts.<br />
Service Tray and Tools:<br />
Optional tray for inspecting<br />
parts and hand tools for<br />
scrubbing burned on or<br />
encrusted deposits.<br />
Surround Cleaning:<br />
With 26 precision spray nozzles<br />
on the spray bar (22 on<br />
<strong>SJ</strong>-<strong>10</strong>), parts are hit from<br />
every angle and are never<br />
more than 18 inches from<br />
the spray nozzle.<br />
Brush Brake:<br />
Stops spray bar from spinning<br />
when lid is opened to protect operator<br />
from hot-water splash.<br />
Rectangular Parts Basket:<br />
Easy-to-lift-out parts basket is more conducive<br />
to fitting automotive parts (stainless<br />
steel option #21-150 (<strong>SJ</strong>-<strong>10</strong>), #21-152 (<strong>SJ</strong>-15).<br />
Water-Propelled Spin Bar: Spinning<br />
spray bar is pushed by water eliminating<br />
a need for a drive motor, electric<br />
turntable, transmission, gears, tires, brushes,<br />
and other mechanical devices that<br />
require additional maintenance.<br />
Drain Port: 1-1/2-inch plug provides<br />
convenient disposal of wastewater.<br />
Suction Line Strainer: Protects<br />
pump and nozzles from debris in the tank.<br />
Manual Lid Lock: To lock lid closed<br />
when pump is operating for added operator<br />
safety.<br />
Efficient Heating: High-efficiency<br />
6KW calrod heating element is protected<br />
in an incoloy sheath for longer life (4.5KW<br />
calrod on <strong>SJ</strong>-<strong>10</strong>).<br />
Extra Large Tank: 80-gallon tank<br />
(64-gallon on <strong>SJ</strong>-<strong>10</strong>), nearly twice the capacity<br />
of <strong>com</strong>parable parts washers, keeps<br />
water hotter and cleaner longer.<br />
Low-Water Shut Off: Automatically<br />
shuts down the unit if the water drops<br />
below normal operating level thus protecting<br />
the heating element and pump from<br />
damage (not visible).<br />
Easy-to-Open Lid:<br />
Durable lid is easy to open<br />
with side-mounted gas struts.<br />
AUTOMATIC WASHERS FOR CLEANING PARTS AS LARGE AS A TRANSMISSION<br />
Discover the Many Ways LANDA Parts Washers Can Save You Money with the Patented Water-Propelled Spinning Spray Bar Design<br />
Made in USA<br />
Chip Tray Protection:<br />
Metal chip trays, located directly<br />
below the basket, retain heat in the<br />
cleaning solution and prevent stray parts<br />
and large metal shavings from falling into the<br />
tank. Without the trays, wash water would have<br />
to be drained to retrieve stray parts.<br />
®<br />
Hot Air Exhaust:<br />
Removable baffle allows for<br />
connecting flexible exhaust<br />
pipe.<br />
U.S. Patent<br />
No. D384446<br />
Other patents pending<br />
Control Panel: Easy-toaccess<br />
electrical box has switches<br />
and indicator lights for automatic<br />
timers and power. There is also a<br />
low-water indicator light.<br />
Belt Oil Skimmer: Optional motorized<br />
belt oil skimmer automatically<br />
removes excess floating oils from solution<br />
tank (not visible).<br />
Steam Condensation Pad:<br />
Reduces water loss by filtering steam in<br />
the exhaust port.<br />
Leak-Free Lid: Interlocking<br />
mechanical seal eliminates the need for<br />
seals or gaskets.<br />
Safety Handles: High-density,<br />
heat-resistant, plastic handles are located<br />
on both sides for convenience in<br />
opening lid.<br />
Tri-Lingual Labels: Operating<br />
instructions and warning labels are easy<br />
to find and detailed in English, Spanish<br />
and French.<br />
Momentary Safety Switch:<br />
Automatically turns off pump when lid<br />
is opened to protect operator from hotwater<br />
spray.<br />
Industrial Pump: Cast iron<br />
head provides cleaning force of<br />
up to 35 gpm and 45 psi (20<br />
gpm and 40 psi on <strong>SJ</strong>-<strong>10</strong>).<br />
Durable Spin<br />
Assembly: A carbon<br />
graphite rotary union<br />
with long-lasting, lowmaintenance,<br />
non-corrosive<br />
seals rotates on a hardened<br />
stainless steel spin pin.<br />
Filtration System: Stainless<br />
steel strainer filters debris and solids to<br />
as small as 0.008 inches, extending the<br />
life of the cleaning solution. Strainer is<br />
easy to remove and clean for reuse.<br />
Auto Water Fill: Option for ease<br />
of maintenance by automatically replenishing<br />
the water in the tank before<br />
cleaning solution level drops too low.<br />
Pressure Gauge: Optional<br />
gauge for measuring performance of<br />
both the filtration system and industrial<br />
pump.<br />
Temperature Gauge: Optional<br />
gauge for measuring water temperature.<br />
Automatic Timers: 1-hour wash<br />
timer allows for unattended operation<br />
plus protects against operator neglect.<br />
7-day programmable heater timer saves<br />
energy by turning off heater when not<br />
in operation for long periods.<br />
NEW TECHNOLOGY<br />
CREATING A REVOLUTION<br />
IN PARTS CLEANING<br />
olvent-based<br />
S scrub tubs are<br />
headed for the<br />
scrap heap of history.<br />
For two reasons:<br />
■ Solvents are hazardous<br />
to employees<br />
and the environment;<br />
■ Scrub tubs force<br />
skilled mechanics to<br />
be diverted from working on repairs, to the messy<br />
task of cleaning parts by hand.<br />
In recent years, automatic, aqueous parts washers<br />
have <strong>com</strong>e to the rescue. But they, too, have<br />
their weaknesses:<br />
■ They’re too expensive for low-volume usage; or<br />
■ They can create their own maintenance headaches<br />
with gears, drive motors, and transmissions.<br />
Now there’s a smarter way.<br />
LANDA’s new <strong>SJ</strong> Series Aqueous Parts Washer,<br />
with its water-propelled<br />
spray bar, offers<br />
the labor savings of an<br />
automatic parts washer<br />
without the maintenance<br />
headaches.<br />
And, best of all, it<br />
has a scrub-tub price<br />
Model <strong>SJ</strong>-<strong>10</strong>A<br />
Shown with Optional Accessories<br />
without the worry of<br />
solvents!