2011 CATALOGUE - Pacific Yamaha BMW

aprilia

2011 CATALOGUE - Pacific Yamaha BMW

2011 CATALOGUE


INTRODUCTION

Aprilia Racing is the only official supplier of Racing

Parts for Aprilia motorcycles.

Each component is strictly derived from the long

term and winning experience made by Aprilia

Racing on the toughest racetracks in the world,

from the Superbike World Championship to the

Dakar to the Motocross and Supermoto World

Championship, and is designed and manufactured

aiming to the maximum performances and reliability

with the support of the best specialists available.

SALES CONDITIONS

• Aprilia Racing Parts are made in accordance with FIM technical

race regulations and are NOT street legal

• Before fitting any Aprilia Racing Part customers should check

the technical regulation of their race class to ensure conformity

• All the Aprilia Racing Parts can be used exclusively on closed

circuits. Aprilia Racing declines any responsability in case of

improper use

• Prices and specifications are subject to changes without notice

• Prices are intended to be paneuropean retail VAT excluded,

any installation cost is not included. Installation by an

Aprilia Official Dealer is recommended

• Aprilia Racing Parts are dedicated to racing use and

are sold without warranty

• Be sure to carefully follow installation instructions

and compatibility warnings

HOW TO ORDER

Aprilia Racing Parts can be ordered at any Aprilia Dealership in 3

different moments, these ordering dates and their relative delivery

dates are shown below:

ORDERING DATES DELIVERY DATES

January 2011 March 2011

February 2011 May 2011

June 2011 September 2011

For further information and technical support please visit

the following website:

www.serviceaprilia.com/public/racing

INTRODUCTION

track crOSS MOtarD raLLY


track

closedcircuit

use only

RSV4 FACTORY

| hANDLING | ELECTRONIC | ENGINE |

track

closedcircuit

use only

RSV4 FACTORY

| HANDLING | ELECTRONIC | ENGINE |

BREMBO RACING PADS COT090186

• Z04 racing compound

FRONT WHEEL

FORGED MAGNESIUM BY MARCHESINI

• 16,5”x 3,50”

• Supplied with valves, spacers and bearings

COT100171

REAR WHEEL

FORGED MAGNESIUM BY MARCHESINI

• 16,5”x 6,50”

• Supplied with valves, spacers and bearings

COT100172


track

closedcircuit

use only

RSV4 FACTORY

| HANDLING | ELECTRONIC | ENGINE |

TITANIUM SCREWS KIT

WITH CRASH PADS INCLUDED

COT100251

TITANIUM SCREWS KIT COT100249

CRASH PADS WITH TITANIUM SCREWS COT100250 SBK CLIPON BARS WITH TITANIUM SCREWS COT100252

WHEELBASE +/-1,5 MM

STEERING BUSHES WHEELBASE +/-3,0 MM

WHEELBASE +/-4,5 MM

RAKE +/-0,35 °

• Wheelbase +/- 1,5/3/4,5 mm

• Rake +/- 0,35°

COT090053

COT090054

COT090055

COT090433

CNC TOP YOKE SBK REPLICA COT100253

• Not suitable for ignition switch

track

closedcircuit

use only

RSV4 FACTORY

| HANDLING | ELECTRONIC | ENGINE |

FG399 OHLINS RACING PRESSURIZED CARTRIDGE

FOR FRONT SUSPENSION FORKS

• For OEM Ohlins FG616 fork

COS08160


track

closedcircuit

use only

RSV4 FACTORY

| hANDLING | ELECTRONIC | ENGINE |

APX STEP1 ECU AND

RACING WIRE HARNESS SET

COE10045

ARES – ENGINE SETUP / MANAGEMENT SOFTWARE COE10022 AD VIEWER – DATA ANALYSIS SOFTWARE COE10027

ENGINE SETUP PALMTOP COE10046 RACING DASHBOARD/INSTRUMENT PANEL COE09042

• Traction-control push buttons included • Dedicated software

• Lightweight needle

Allows adjustment of:

• Injection/ignition mapping • Traction control

• Quickshifter • Engine braking

• Anti-wheeling • Position base (turn-by-turn management)

• To check and manage all the information coming from the sensor set

track

closedcircuit

use only

RSV4 FACTORY

| hANDLING | ELECTRONIC | ENGINE |

DATA ACQUISITION SENSORS KIT COE10048

• Suspension gauges

• Lambda sondes and controllers

• Thermo couples

• Oil temperature / pressure gauges

APX STEP2 ECU AND

RACING WIRE HARNESS SET

COE10047


track

closedcircuit

use only

RSV4 FACTORY

| hANDLING | ELECTRONIC | ENGINE |

RACING TITANIUM COMPLETE EXHAUST

BY AKRAPOVIC

• Titanium pipes

• CNC aluminium flanges

• Titanium muffler

• Carbon fiber outershell

• Carbon fiber bracket

COMS090024

track

closedcircuit

use only

RSV4 FACTORY

| hANDLING | ELECTRONIC | ENGINE |

SEL +0.000

HIGH COMPRESSION PISTON SET SEL +0.010

SEL +0.020

SEL +0.030

• CNC machined forged aluminium

• CR 14:1

• Complete with segments

• Available in 4 tolerance classes: +0,00, +0,010, +0,020 and +0,030mm

COMS100031

COMS100032

COMS100033

COMS100034

SLAVE AIR INDUCTION CAPS COMS100037

• CNC Aluminium

RACING CAMSHAFT KIT COMS100035 STM SLIPPER CLUTCH COMS100036

• Complete with sprockets

OIL SUMP RACING GASKET AND FILTER KIT COMS100040 RADIATOR RACING PIPES COT100495

• Racing gasket

• High flow oil filter

• Special joint

• Silicon rubber and aluminium


track

closedcircuit

use only

RSV4 FACTORY

| hANDLING | ELECTRONIC | ENGINE |

CARBON FIBER ENGINE COVERS - LEFT COMS100039

CARBON FIBER ENGINE COVERS - RIGHT COMS100038

APRILIA & MAX BIAGGI


MOtarD

closedcircuit

use only

MXV 4.5

| hANDLING | ENGINE |

MOtarD

closedcircuit

use only

MXV 4.5

| HANDLING | ENGINE |

RADIATOR KIT COT100359

• H 2 O aluminium radiators

• With silicon pipes and brackets

ALPINA FRONT SPOKED WHEEL COT100357

• Supplied with bearings, spacers and rear sprocket

ALPINA REAR SPOKED WHEEL COT100358

• Supplied with bearings, spacers and rear sprocket


MOtarD

closedcircuit

use only

MXV 4.5

| HANDLING | ENGINE |

TITANIUM SCREWS KIT (78 PCS) COT100355 MOTARD FAIRING KIT COT100356

Includes:

• DallaValle saddle

• Carbon fiber fueltank

• Fenders

• Carbon fiber air-filter cover

MOtarD

crOSS

closedcircuit

use only

MXV 4.5

| hANDLING | ENGINE |

MXV REPLICA CLUTCH KIT

MXV REPLICA CLUTCH DISK KIT

• CNC machined clutch drum

• Modified hub (for better lubrication)

• New washer and racing disk

COM100054

COM100053

HINSON CLUTCH KIT COM100060

• CNC machined clutch drum

• Modified hub (for better lubrication)

• New washer and racing disk

CYLINDERS AND DISTRIBUTION KIT COM100056

• Includes plates, collets, lifters, conrod screws, machined cylinders

and cast iron piston rings (Racing ECU required)

TITANIUM CONRODS AND MACHINED CRANKSHAFT COM100058

• Titanium conrods

• Machined / lightweight crankshaft


MOtarD

crOSS

closedcircuit

use only

MXV 4.5

| hANDLING | ENGINE |

TITANIUM COMPLETE EXHAUST BY ARROW COT100367

• Racing ECU required

MOtarD

crOSS

closedcircuit

use only

MXV 4.5

| hANDLING | ENGINE |

WALLBRO ECU UNIT COE10101

• Wallbro ECU 13.200 rpm - necessary for:

• Arrow exhaust

• Distribution/cylinders kit

• Conrods/crankshaft kit

TITANIUM SCREWS KIT FOR ENGINE (136 PCS) COM100059 OVERPRESSURE VALVE KIT COM100057

• Requires crankcase machining in Aprilia Racing with specific machining tool


crOSS

closedcircuit

use only

MXV 4.5

| hANDLING | ENGINE |

crOSS

closedcircuit

use only

MXV 4.5

| HANDLING | ENGINE |

TITANIUM FOOTREST COT100360

FRONT WHEEL KIT COT100362

• Supplied with bearings, spacers and rear sprocket

TITANIUM REAR DAMPER LINK KIT COT100361

REAR WHEEL KIT COT100363

• Supplied with bearings, spacers and rear sprocket

RADIATOR KIT - ALUMINIUM H 2 O RADIATORS

WITH SILICON PIPES AND FIXING BRACKETS

• H 2 O aluminium radiators

• With silicon pipes and brackets

COT100359


crOSS

closedcircuit

use only

MXV 4.5

| HANDLING | ENGINE |

HANDLEBAR COMMAND KIT COT100365

Includes:

• Throttle cables

• Clutch lever and cable

• Grips

TITANIUM SCREWS KIT (78 PCS) COT100368

CARBON FIBER BELLY PAN

AND DEDICATED GEAR PEDAL

COT100369

crOSS

closedcircuit

use only

MXV 4.5

| HANDLING | ENGINE |

CROSS FAIRING KIT COT100366

Includes:

• DallaValle saddle

• Carbon fiber fuel tank

• Fenders

• Number plate

• Carbon fiber air-filter cover

FRONT WAVE BRAKING DISK SET COT100364

Complete with:

• Wheelspindle

• CNC brake caliper bracket

• Carbon fiber brake cover


aLLY

EVOLUZIONE RALLY RAID KIT - RXV 450

| ENGINE | VEhICLE |

ENGINE

Aprilia Racing offers those who like to take part to desert

rallies the opportunity to buy the 450cc engine “ready to

race” and assembled by the Aprilia Racing department

technicians.

The engine is characterized by a long list of dedicated

parts, developed by Aprilia Racing to improve performance

and make it suitable for the extremely intense use in

long African rallies, characterized by extremely hot air

temperatures and never-ending straights ridden at full gas.

The modifications allow longest maintenance routines, which is

mandatory when races are thousands kilometres long.

The new clutch kit with lightweight hub and drum, together with

the new disk kit, gives a better feeling and it is more efficient in the

worst conditions.

The new distribution kit (plates, collets, pads) and the new

conrods screws, gives a major reliability and allow to increase the

rpm limiter from 12.500 to 13.200.

A different blow-by circuit gives a better lubrication of the rear

cylinder and a major affordability, while the new, heavier, flywheel

gives a smoother throttle response to improve traction and

rideability on hard surfaces.

To complete the kit, aluminium oil tank caps with magnetic inserts

to keep metal impurities far from the crankshaft.

A tuning up service is also available on the standard

RXV 450 engine. By sending a standard engine to Aprilia

Racing it will be updated and modified by Aprilia Racing

technicians to make it suitable for the hardest desert races.

Note: engines, engine kits and vehicle kits are exclusively

distributed by Giofil Team

More info at: www.giofil.com

raLLY

EVOLUZIONE RALLY RAID KIT - RXV 450

| ENGINE | VEhICLE |

COMPLETELY MODIFIED ENGINE

C/O APRILIA RACING

• Clutch kit

• Plates

• Collets

• Pads

• Pankl conrods screws

• Oil tank inlet cap

• Oil tank outlet magnetic cap

• Rear cylinder head cover

• Blow-by flange

• Kokusan flywheel

• Manpower


aLLY

EVOLUZIONE RALLY RAID KIT - RXV 450

| ENGINE | VEHICLE |

VEHICLE KIT

Nothing is missing in the vehicle kit to transform a

standard RXV 450 into a “desert race ready” bike.

Aprilia Racing technicians have done everything necessary

to ensure the very best performance.

Starting from the new frame, reinforced and modified to house

4 aluminium hand-made fuel tanks, with internal anti-rinse

bulkheads and fast joints, where new, larger and more resistant

billet aluminium footrests and new risers are installed.

The new front frame houses the completely modified wiring to

match dedicated push buttons and dashboard (not included),

2 polyellipsoidal headlights and an oil radiator, while the new rear

frame houses an aluminium tools store.

Another tool store and a 1,5 litres water tank are housed in the

new engine guard, made of carbon fibre as the whole fairing kit

and fenders.

The new rims have tangential reinforced spokes and reinforced

nipples and a new rear anti-jerk, to face any kind of stress. A

rotational steering damper gives the best vehicle control even in

the worst situations, thanks also to the new carbon fibre saddle.

Moreover, a new titanium 2into1into2 complete exhaust is

supplied, together with new silicone rubber radiator pipes.

Note: engines, engine kits and vehicle kits are exclusively

distributed by Giofil Team

More info at: www.giofil.com

raLLY

RXV RALLY

| ENGINE | VEHICLE |

COMPLETE VEHICLE KIT

• Modified frame

• Complete footrests

• Side stand

• Risers

• Ohlins steering damper

• Gear pedal

• Engine guard with tools store

• Drinkable water tank

• Rear wheel with brake disk

• Brake lever

• Right front fuel tank

• Left front fuel tank

• Right rear fuel tank

• Left rear fuel tank

• Fuel tank cap

• Gearbox oil tank inlet cap

• Dalla Valle saddle

• Carbon fibre saddle support

• Front fender

• Rear fender

• Headlight

• Tail light

• Complete exhaust system

• Racing wiring

• Dashboard support frame

• Oil cooler

• Tools store

• Silicone rubber cooler pipes

• Full fairing

• Fast joints


Aprilia Racing

Via Marconi, 9

30033 Noale (VE)

Italy

racing_sales@aprilia.It

More magazines by this user
Similar magazines