Simplest possible access to PLC data
via standard PC applications
Reading and writing of SIMATIC S7-200 data
with standard Windows applications using the example of MS Excel
Micro Automation Sets – ready-to-
run combinations from the Siemens
Quickly implemented automation
tasks at a favorable price in the
world of micro automation – simple,
low-cost and pre-tested in working
PPI interface PPI interface
e.g. PROFIBUS cable
SIMATIC S7-200 SIMATIC S7-200
SIMATIC S7-200: plant automation
PPI cable: connection of PPI network with the PC
PC Access: control and monitoring of the plant
• Extremely user-friendly – low-cost and modern processing and visualization of data or variables.
• Extremely simple – programming-free access to SIMATIC S7-200 data using supplied MS Excel
• And flexible – all data types supported by SIMATIC S7-200 can be used.
• Big advantage – all SIMATIC S7-200 connection options are supported, e.g. modem, GSM
modem, MPI, PPI and Ethernet.
• No detours – symbols can be imported direct into a SIMATIC S7-200 PC Access project from
STEP 7 Micro/WIN.
• Always practical – access to several SIMATIC S7-200 CPUs is possible in conjunction with
• Embark on a new course with Siemens – all of the data and the right contact partners for
the Set, straightforward ordering or planning with different versions, immediately, directly
and simply through www.siemens.com/microset – the fastest way to a working solution.
e. g. MS Exel (as OPC client)
S7 device driver
e.g. USB port
Technical component data
The PC software enables data transfer between
PC/PG and the S7-200 CPU. Process data can
be swapped out, backed up in the long term,
and written to the controller, with Excel, for
• Data archiving
• Statistical tools
• Operator control and monitoring
• Connection of third-party systems
1 LOGO!Power, SIMATIC S7-200 primärgetaktete (CPU 224 XP) Stromversorgung
Eingangsspannung Supply voltage Nennbereich AC 20.4 100...240 to 28.8 V V, DC zulässiger or 85 to Bereich 264 V AC AC 85...264 V
Zulässige Integral inputs/outputs Netzfrequenz 47...63 up to 248 HzDI/DO
and 35 AI/AO
Ausgangsspannung/-strom Program memory/data memory 24V/1.3A max. 16 kB/10 (weitere kB Varianten: 24 V/2.5 A; 12 V/1.9 A; 12 V/4.5 A; 5 V/3 A;
Program backup 5 Maintenance-free V/6.3 A; 15 V/1,9 in A; the 15 integral V/4 A verfügbar) EEPROM
Data backup EEPROM/high-intensity capacitor/backup battery
Programming language LAD, FBD, STL
Interfaces max. 2 x RS 485 communication interfaces integrated
2 PPI cable
Protocols PPI; Freeport (ASCII)
Communication rate 9.6 / 19.2 / 187.5 kBit/s
Galvanic isolation Yes
3 PC Access
Operating systems Windows 2000, Windows XP
Installable languages English, Chinese, German, Spanish, Italian, French
Connection paths • Ethernet (with CP243-1 (IT)
• PPI Multi-Master (with S7-200 RS 232/USB cable)
• MPI (with CP cards: max. 4 connections)
• Modems (standard modem, mobile wireless modem, dedicated modem)
Support for configuring is available on the Internet: for example simple start-up software
examples and detailed Micro Application Examples with programs and parameters.
MICRO AUTOMATION SET – your planning tool
Choose from implementation plans that have proven success. You will find all the necessary
components for the application (Micro Automation Set) in this overview, and also on the Internet.
In cases where you require versions that are adapted to your particular system requirements, obtain
the appropriate ordering data for specific component versions under www.siemens.com/microset.
Your MICRO AUTOMATION SET – everything that you need
Product Order No. Comments/Versions
SIMATIC S7-200 CPU 224 XP 6ES72 14-2BD23-0XB0
PPI cable (for the USB port) 6ES7901-3DB30-0XA0
PC Access (single-user license) 6ES7840-2CC01-0YX0
PC Access (multi-user license for 15 installations) 6ES7840-2CC01-0YX1
Accessories Order No.
PROFIBUS cable 6XV1830-0EH10
PROFIBUS connector 6ES7972-0BB12-0XA0
Engineering software/tools Order No.
STEP 7 Micro/WIN 6ES7810-2CC03-0YX0
Your contact for the MICRO AUTOMATION SET
For further information please contact your local Siemens
partner or local Siemens distributor.
If you do not know your Siemens partner please contact
the helpline. Helpline: +49 180 5050 111
Your MICRO AUTOMATION SET on the Internet
Contact partners, ordering data, and version information, as
well as additional information and examples are provided under:
SIMATIC ® is a registered trademark of Siemens. Other designations used in this publication may
be trademarks whose use by third parties for their own purposes could violate the rights of the
owners. © Siemens AG 2004
The information provided in this brochure contains merely general descriptions or performance
characteristics, which in case of actual use do not always apply as described or which may
change as a result of further development of the products. An obligation to provide the respective
characteristics shall only exist if expressly agreed in the terms of contract.
Automation and Drives
P.O. Box 48 48
Subject to change without prior notice 11/04 | Order No. E20001-A710-P273-X-7600 | DISPO 06307 | 21C8368 MK.AS.MS.XXXX.52.5.02 WS 11040.6 | Printed in Germany | © Siemens AG 2004