Modular Multitrack Recorder - Tascam

More documents

Recommendations

Info

General Guidelines Mounting Rack Ears The MMR-8 is a self-contained eight channel digital playback and recording device designed to be mounted in a standard 19” (48.26 cm) IEC equipment rack in either the mix studio or a dedicated machine room in a professional audio recording facility. As such, each MMR-8 is housed in a steel chassis 19inches (48.26 cm) wide by 17 ¼ inches (43.81 cm) deep by 7-inches (17.78 cm) tall. Each MMR-8 requires 5U (7-inches or 17.78 cm) of rack space. Integral rack ears are provided with the chassis. If the unit is not rack-mounted, the rack ears do not need to be installed onto the MMR-8 chassis. For rack mounting, install one rack ear to the front of each side of the MMR-8 (three Phillips screws per side are supplied for fastening the rack ears to the chassis). Figure 2-1. Rack Ear Installation 18 <strong>Tascam</strong> MMR-8 User’s Guide • Chapter 2 • Installation MMR-8
Installing Multiple MMR Units Multiple units can be mounted one on top of the other when forced air rack ventilation is provided. A oneinch clearance is required on both sides of the MMR-8. In facilities with raised computer room-style flooring, a ventilation opening in the floor is recommended. In no case should the internal rack temperature ever exceed 110 degrees Fahrenheit (43 degrees Centigrade) during normal operation (as measured at the rear of any of the MMR-8s in the system). Figure 2-2. Multiple MMR-8 Rack Installation MMR-8 <strong>Tascam</strong> MMR-8 Owner’s Manual • Chapter 2 • Installation 19
Page 1 and 2: » MMR-8 Modular Multitrack Recorde
Page 3 and 4: IMPORTANT SAFETY INSTRUCTIONS CONSI
Page 10 and 11: TEAC CORPORATION 3-7-3, Nakacho, Mu
Page 12 and 13: Chapter 3 MMR-8 Operation..........
Page 14 and 15: 8 Appendix D: MMR-8 Cable Informati
Page 16 and 17: The MMR-8 will directly play back m
Page 18 and 19: Functional Overview The MMR-8 opera
Page 20 and 21: 14 Figure 1-3. MMR-8 Panel/Display
Page 22 and 23: Electrical Ratings: 16 115 VAC @ 2A
Page 26 and 27: AC Mains and Grounding (Earthing) C
Page 28 and 29: Audio Connections All audio inputs
Page 30 and 31: Biphase Connections Biphase is a co
Page 32 and 33: Serial Transport Connection The TRA
Page 34 and 35: Powering Up the System The MMR-8 co
Page 36 and 37: Factory Default Settings The MMR-8
Page 38 and 39: 32 Tascam MMR-8 User’s Guide •
Page 40 and 41: Mode This term is used to refer to
Page 43 and 44: Front Panel Indicators, Switches, a
Page 45 and 46: Liquid Crystal Display (LCD) The LC
Page 47 and 48: Slip Track State Display In the Sli
Page 49 and 50: Front Panel Key Groups The MMR-8 fr
Page 51 and 52: SHIFT+UP ARROW (TC/FEET) SHIFT+TRIM
Page 53 and 54: SEL (TRACK SELECT) SHIFT+SEL (vario
Page 55 and 56: Insert Insert places the contents o
Page 57 and 58: Edit Sync Mode The setting chosen i
Page 59 and 60: SHIFT + LOAD TRACK (DELETE) As with
Page 61 and 62: Keypad Group These keys are located
Page 63 and 64: HEAD (SHIFT+8) NEXT EDIT (SHIFT+9)
Page 65 and 66: LOOP Pressing the Loop key prepares
Page 67 and 68: Basic Operation Loading and Mountin
Page 69 and 70: Once a track is loaded into a track
Page 71 and 72: Trimming Time Code Values Any time
Page 73 and 74: The Setup State & the Setup Menus C
Page 75 and 76:
Setup Menu Chart This chart lists a
Page 77 and 78:
MENU # MENU NAME PARAMETERS 301 Bip
Page 79 and 80:
Setup Menu Details This section con
Page 81 and 82:
The Lynx Bus The Lynx bus allows co
Page 83 and 84:
Record Mode Menu 200, Record Mode,
Page 85 and 86:
Chapter 5 MMR-8 System Applications
Page 87 and 88:
Menu 300 is used to set the Biphase
Page 89 and 90:
Chapter 6 Maintenance & Service The
Page 91 and 92:
MIC Calibration Procedure Follow th
Page 93 and 94:
For technical support on the MMR-8
Page 95 and 96:
Appendix A: Control Panel Command S
Page 97 and 98:
SHIFT+6 Locate to Previous Edit poi
Page 99 and 100:
Appendix B: TASCAM MMR-8 Drive Comp
Page 101 and 102:
Appendix C: WaveFrame Compatibility
Page 103 and 104:
Appendix D: MMR-8 Cable Information
Page 105 and 106:
TRANSPORT (Sony 9-pin) Connector pi
Page 107 and 108:
DIO (AES/EBU Digital Audio) Connect
Page 109 and 110:
VITC IN Connector NOTES: SERIAL CON
Page 111 and 112:
Appendix E: MMR-8 Glossary Abbrevia
Page 113 and 114:
Abbreviations and Terms Definitions
Page 115 and 116:
Abbreviations and Terms Definitions
Page 117 and 118:
Index 2 24-BIT REC LED ............
Page 119 and 120:
In Point...........................
Page 121 and 122:
Reverse Play Key...................
Page 123:
Tascam MMR-8 Owner’s Manual • I
show all

Modular Multitrack Recorder - Tascam

Create successful ePaper yourself

Delete template?

Save as template?