Manual tehnic automate cafea Saeco Group 500
Manual tehnic automate cafea Saeco Group 500
Manual tehnic automate cafea Saeco Group 500
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
English<br />
9.4 Resin regeneration (where the water<br />
46<br />
fig.60<br />
softener is provided)<br />
The regeneration of resins shall be performed<br />
in relation to the water in the mains network to<br />
which the machine is connected.<br />
The table below can be used as a reference:<br />
WATER HARDNESS NUMBER OF SELECTIONS<br />
°French<br />
10<br />
20<br />
30<br />
40<br />
50<br />
60cc 130cc<br />
2<strong>500</strong>0<br />
12<strong>500</strong><br />
9<strong>500</strong><br />
6<strong>500</strong><br />
<strong>500</strong>0<br />
12<strong>500</strong><br />
6000<br />
4<strong>500</strong><br />
3000<br />
2<strong>500</strong><br />
In order to check the degree of water hardness<br />
and consequently the time and type of<br />
intervention, specific kits available on the market<br />
can be used.<br />
The operation can be performed on the vending<br />
machine as follows:<br />
- power the machine off<br />
- turn the lower tap taking care to place the<br />
related hose into a bucket or better into a drain<br />
system (fig.60).<br />
- remove the cover and introduce 1.5 kg of<br />
normal kitchen salt (fig.61)<br />
fig.61<br />
- refit the cover<br />
- power the machine on and drain the water<br />
until it is no longer salty<br />
- power the machine off and close the tap<br />
(fig.62).<br />
This operation takes about 30/45 minutes.<br />
fig.62