2012 FIM Technical Rules Motocross
2012 FIM Technical Rules Motocross
2012 FIM Technical Rules Motocross
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
For Supermoto<br />
Riders must wear a complete leather suit’ of one piece, with a recommended<br />
minimum thickness: 1,2 mm and with additional leather padding or other protection<br />
on the principal contact points, knees, elbows, shoulders, hips, etc.<br />
Sections of the leather suit not directly subject to ‘crash’ damage may use a small<br />
limited area or strip made of a material which have the same protective properties<br />
as leather (see Art. 65.07 in the General Section).<br />
Linings or undergarments must not be made of a synthetic material which might<br />
melt and cause damage to the riders’ skin.<br />
Riders must also wear leather gloves and boots, which with the suit provides<br />
complete coverage from the neck down.<br />
The use of a back protector is highly recommended.<br />
65.07 Material equivalent to leather<br />
For the main article, refer to the same number in the General section.<br />
65.08 Approval<br />
FMNs (National Motorcycling Federations) which approve protective clothing<br />
must present the certificate of a testing institute to the <strong>FIM</strong> for their records. The<br />
suits must carry an FMN) approval mark, only if required by the FMN.<br />
01.67 WEARING OF HELMETS<br />
For the main article, refer to the same number in the General section.<br />
01.69 HELMET OPERATIVE INSTRUCTIONS<br />
For the main article, refer to the same number in the General section.<br />
67<br />
CMS