Leaflet FATRAFOL-S

FATRAFOL-S
Roof waterproofing system
Roof waterproofing system FATRAFOL-S
Name Application Thickness (mm) Width (mm) m 2 / roll Colour
FATRAFOL 810
FATRAFOL 810 AA
FATRAFOL 810/V
FATRAFOL 810/V AA
FATRAFOL 807
FATRAFOL 808
The basic type of a reinforced roofi ng membrane, manually anchored
to base, its composition complies with classifi cation
of B ROOF (t3)
Suitable for application in fi re dangerous spaces its composition
complies with classifi cation of B ROOF (t3)
The basic type of a reinforced roofi ng membrane. manually anchored
to base, its composition complies with classifi cation of B ROOF (t3)
Suitable for application in fi re dangerous spaces, its composition
complies with classifi cation of B ROOF (t3)
Renovation of asphalt-based coverings (adhesion to base), with
laminated fabric
Under a loaded or functional layers – „green roofs“ and so-called
„inverted roofs“, with laminated fabric
Making the one-ply coverings of fl at roof loaded by aggregate fi llings,
FATRAFOl 818/V
tread-type or vegetative layers.
FATRAFOL 814 Reinforced roofi ng membrane with anti-slip embossing for wateproofi ng
of terraces and balconies as
a top layer of tread-type roofs.
FATRAFOL 804
FATRAFOL P 918
As a complement to the PVC membrane 810, suitable for complicated
roofs and detail fi nishing
Membrane on TPO – basis for temperature loaded roofs of possibility
of a direct laying on base
of bitumen and polystyrene
Fatraroof Thermo MW
1. Fatrafol 810 membrane
2. Mineral Wool
3. Vapour barrier
4. Closing of trapezal plate
5. Trapezial plate
6. Nonwoven fleece
7. Platicized plate
1.2
1.2
1.5
1.5
2.0
Fatra, a.s., tř. T. Bati 1541, 763 61 Napajedla, Czech Republic
tel.: +420 577 501 111, fax: +420 577 502 555, e-mail: info@fatrafol.cz, www.fatrafol.cz | www.fatra.cz
1 300
1 600
1 300
1 600
1 300
26
26
26
26
20
grey and coloured *
1.5 1 300 26 grey
1.2
1.2
1.2
1.2
1.5
1.5
1.5
1.5
1.8
1.8
1.8
1.2
1.5
2.6
(1.5)
2.3
(1.2)
1.2
1.5
1.8
1 000
1 600
2 000
2 050
1 000
1 600
2 000
2 050
1 000
2 000
2 050
2000 / 1000
2000 / 1000
25
40
50
51.25
20
32
40
41
16.5
33
33.8
50
40
grey and coloured *
grey
1 300 20 grey and coloured *
1 300 20 green
2 050
51.25
41
33.825
2.5 1 000 12
2.0 1 200 18
grey - green
grey,
dark grey,
green
grey
coloured
1.5 2050 41 special grey
* Colour variants dark grey, olive green and blue made to order
Fatraroof Thermo PS
1. Fatrafol 810 membrane
2. Polystyrene
3. Vapour barrier
4. Closing of trapezal plate
5. Trapezial plate
6. Nonwoven fleece
7. Platicized plate
FATRAFOL-S
Roof waterproofing system
Fatrafol 810 | Fatrafol 804 | Fatrafol 807 | Fatrafol 808 | Fatrafol 818
Fatrafol 814 | Fatrafol P918 (TPO)
WWW.FATRAFOL.CZ
Fatra, a.s., tř. T. Bati 1541, 763 61 Napajedla, Czech Republic
tel.: +420 577 501 111, fax: +420 577 502 555, e-mail: info@fatrafol.cz, www.fatrafol.cz | www.fatra.cz

FATRAFOL-S
Roof waterproofing system
The FATRAFOL-S roof waterproofing system is designed to create roof ply coverings for all types of buildings, encompassing both flat and sloping roofs
AQUAPLAST in residential, public, 805 is administrative, a non reinforced industrial, membrane agricultural, on base sports of plasticized and similar polyvinylchloride buildings. (PVC P). Membrane is stabilized to UV radiation.
It has very good chemical resistance to all waters occurring in nature without difference of volume of minerals and natural substan-
The system is suitable for all structural roof solutions, i.e. single ply and double ply roofs, ventilated and non-ventilated roofs, roofs with a heat-inces
dissolved in it.
sulating layer underneath and above the roof covering, pitched and non-sloping roofs, non-walk-on and walk-on roofs, traffic-type roofs, roofs with
aggregate or soil fillings, garden top roofs and water-covered roofs.
AQUAPLAST 805 is first of all identified for inlaying of garden ponds due to growing water plants. It hinders to the water leakage. Then
the membrane is suitable for waterproofing of ponds, fire reservoirs, small water reservoirs, irrigation reservoirs, etc. The applied membrane
FATRAFOL is harmless 810for
fish and water plants.
Product description: FATRAFOL 810 is a roofing membrane on the basis of PVC-P reinforced with a polyester grid. It is resistant to UV-radiation and
can be exposed to the direct weathering influences. FATRAFOL 810 (810 AA) is produced by calendering and lamination, FATRAFOL 810/V (810/V
AA) by a multi-extrusion processing. FATRAFOL 810 AA has a higher fire resistance.
Usage: FATRAFOL 810 is identified first of all for making the one-layer coating coverings of flat roofs, mechanically anchored to the underley without
loading layer. FATRAFOL 810 can be used also for the roofs being partly loaded. If a foamed polystyrene or element of asphalt is an adjacent layer of
the sheet coat in the roofing covering, there is necessary to hinder them from the direct contact with - by a separation layer.
FATRAFOL 804
Product description: FATRAFOL 804 (804 AA) is a unreinforced roofing membrane on basis of PVC-P. It is resistant to UV-radiation and can be exposed
to the direct weathering influences. FATRAFOL 804 AA has a higher fire resistance.
Usage: FATRAFOL 804 is identified especially as a supplement of reinforced roofing FATRAFOL - membranes of broken roof surfaces and of detail
finishing. The membrane in thickness of 1.5 mm is identified for detail working, only. It is not suitable for full-area application, mechanical anchored
roofing membrane. If a foamed polystyrene or element of asphalt is an adjacent layer of the sheet coat in the roofing covering, there is necessary to
hinder them from the direct contact with - by a separation layer of
FATRAFOL 807
Product description: FATRAFOL 807 (807/F, 807 AA) is the roofing membrane on the basis of PVC-P with underlay sheet of a non-woven PES-textile.
It is resistant to UV-radiation and can be exposed to the direct weathering influences. FATRAFOL 807 (807 AA) has one edge of the sheet without
non-woven textilie due to anable a longitudinal band joining. The underlay non-woven textile of FATRAFOL 807/F is along the entire width of the band.
FATRAFOL 807 AA has a higher fire resistance.
Usage: FATRAFOL 807 is identified especially for the sanitations of old asphalt coating roofing of flat roofs. The main membrane application is
within sticking systems. The back membrane is furnished with a textile pad being suitable for the bitumen contact.
WWW.FATRAFOL.CZ
Fatra, a.s., tř. T. Bati 1541, 763 61 Napajedla, Czech Republic
tel.: +420 577 501 111, fax: +420 577 502 555, e-mail: info@fatrafol.cz, www.fatrafol.cz | www.fatra.cz
FATRAFOL 808
Product description: FATRAFOL 808 is the roofing membrane on the basis of PVC-P with underlay sheet of a non-woven PES-textile. FATRAFOL 808
has one edge of the membrane without non-woven textilie due to anable a longitudinal band joining. It is resistant to UV-radiation and can be exposed
to the direct weathering influences.
Usage:
FATRAFOL 808 is identified as a waterproofing layer of roofing sheeting of flat roofs in following structures:
a) With vegetative layer, so called „vegetative roofs“
b) With thermal insulation above waterproofing layer, so called „inverted roof“
c) With stabilization sheet of aggregate or paving on pads
At the application of polystyrene building elements, which are linking up to the membrane waterproofing system in the construction of roofing, there
is necessary to protect them from direct contact with free surface of jointing with a non-woven textile of the area mass of 200 g.m-2
FATRAFOL 818
Product description: FATRAFOL 818/V is a roofing membrane on PVC-P basis with inbuilt glass fleece. Membrane is produced by a multi-extrusion
processing.
Usage: FATRAFOL 818/V is identified for providing the one layer coating of flat roof coverings being loaded with aggregates, functional or vegetative
layers. FATRAFOL 818/V is not long-stable resistant to UV radiation; that is why the loaded layer has to ensure a durable membrane protection from
direct influence of weathering influences.
FATRAFOL 814
Product description: FATRAFOL 814 is a roofing membrane on PVC-P basis with inbuilt glass fleece. The upside is furnished with a special anti-slip
embossing. It is resistant to UV-radiation and can be exposed to the direct weathering influences.
Usage: FATRAFOL 814 is identified for waterproofing of terraces of dwelling houses and balconies as treat-type- layer. The membrane is suitable
for the creation of pavements on flat roofs waterproofed with FATRAFOL membranes.
FATRAFOL P918 (TPO)
FATRAFOL-S
Roof waterproofing system
Product description: FATRAFOL P 918 is a roofing waterproofing membrane on a basis of thermoplastics polyolefines (TPO) with inbuild glass fleece.
The membrane is UV-radiation resistant and can be exposed to the direct weathering influences. The membrane is tolerant to asphalt. FATRAFOL P
918 is produced by multi-extrusion.
Usage: FATRAFOL P 918 is identified first of all for making the one-layer coating coverings of flat roofs, mechanically anchored to the underley
without loading layer. FATRAFOL P 918 can be used also for the roofs being partly loaded and roofs with a vegetation layer.
Fatra, a.s., tř. T. Bati 1541, 763 61 Napajedla, Czech Republic
tel.: +420 577 501 111, fax: +420 577 502 555, e-mail: info@fatrafol.cz, www.fatrafol.cz | www.fatra.cz