5 years ago

IFB - Fauquier County

IFB - Fauquier County

C. Touch Panel 1. 12"

C. Touch Panel 1. 12" touch screen display. 2. 800 x 600 SVGA display resolution. 3. High-definition 24-bit graphics powered by Core 3. 4. HDCP-ready touch screen controller 5. Digital Graphics Engine (DGE) installs up to 450 ft (137 m) away. 6. Built-in microphone and speakers. 7. Acceptable product: a. Crestron V-12-TILT-X b. Crestron Power Supply 2.13 ADD ALTERNATE ONE A. DM Receiver/Scaler 1. DM 8G® Fiber input supports up to 1000 ft (300 m) cable length. 2. Connects to a DM® switcher or transmitter over one multimode fiber strand. 3. Provides one HDMI® or DVI display output. 4. Accepts any video source from standard NTSC 480i or PAL 576i, to HD 1080p60 w/Deep Color. 5. Also accepts any computer source from VGA to UXGA/WUXGA. 6. Scales the source to match the native resolution of virtually any popular video display or computer monitor. 7. Provides intelligent frame rate conversion. 8. Allows motion-adaptive de-interlacing or interlacing. 9. Allows adjustable overscan or underscan up to 7.5%. 10. Includes content-adaptive noise reduction. 11. 100% HDCP compliant. 12. Provides 10/100 Ethernet and USB HID mouse/keyboard ports. 13. Enables device control via CEC, IR, RS-232, and Ethernet. 14. Provide with all necessary cable and connectors. 15. Acceptable product: a. Crestron DM-RMC-SCALER-S b. Crestron CRESFIBER8G-P-500SP c. Crestron CRESFIBER-CONN-SC50UM-12 2.14 PLATES AND PANELS/FLOOR BOXES A. Provide plates and panels as described in the drawings and as required for fully operable system(s). B. Custom plates shall be 1/8” thick aluminum, standard EIA sizes, sized to cover rough- in/boxes behind plates. C. Plastic plates are not allowed. D. Lettering shall be in all caps and numbers engraved with black or white lettering to the base material with a minimum size of 0.25”. 1. Font Size shall be 1/8” a. Font Style shall be Helvetica IFB# 98-13kh Fauquier High School Falcon Room Audio Visual Systems page 34 of 50

E. Acceptable manufacturer of custom plates and panels shall be: 1. RCI Custom – AL/ALOS series Aluminum Wall Plates 2.15 CABLES AND WIRING A. All audio cable shall be stranded copper. B. Shielded cables located in raceways shall have aluminum foil shield with drain wire. C. Where cables are run exposed in return plenum space, provide plenum rated cable. D. Where cables are routed through cable tray, provide tray rated cable of equal gauge. E. Provide the following as required for fully operable system(s). 1. Microphone/Line level cables: No. 22 shielded jacketed – with gray jacket; standard – 291; plenum – 25291 2. Miniature microphone/line level cables: No. 22 shielded jacketed – West Penn 452 with gray jacket 3. Constant voltage speakers: amplifier to zone: Min No. 14 gauge – West Penn 226. 4. Constant voltage speakers: plenum rated amplifier to zone: No. 14 gauge jacketed- West Penn 25266. 5. Constant voltage speakers: within zone No. 16 gauge jacketed – West Penn 225. 6. Constant voltage speakers: within zone plenum No. 16 gauge jacketed – West Penn 252225. 7. Communication outlet cables: No. 20 shielded – Belden 83559 Plenum. 8. Audio Communications/Ethersound cables (runs under 105m): No. 24 – Belden 1304A. 9. Control cables: No. 22 shielded – West Penn 3272. 10. Control cables: No. 22 shielded Plenum – West Penn 253272. 11. IT/Communication outlet cables: 12. RGB video cable: Belden 1406B, 1407B, 1417B as required. 13. RGB riser: Belden 7710A, 7711A, 7712A, 7713B as required. 14. RGB plenum rated: Belden 1824A, 1825A, 1826A as required. 15. S-Video cable: Belden 1808A. 16. Precision video HD/SDI cable: West Penn Plenum – 256350, Non-Plenum - 6350. 17. RGB sync cable: West Penn WP6355. 18. Loudspeaker cable: No. 10 gauge jacketed West Penn HA210, plenum West Penn 25210. 19. Antenna cable: RG-59 minimum refer to manufacturer’s specification and recommendations as required. 20. Crestron DM Cable: Crestron 8G+ plenum with connectors. 2.16 LOUDSPEAKER CLUSTER RIGGING A. Provide rigging, hardware, suspension cables, and all appropriate hardware for the clusters as required for a fully operable system. Including any necessary support steel or additional steel required for proper rigging and suspension. A structural engineer licensed by the state where the installation will take place shall approve the rigging system with stamped drawings. B. Acceptable manufacturers for all mounting bars and trusses: ATM Flyware, Custom by Speaker Manufacture or approved custom. IFB# 98-13kh Fauquier High School Falcon Room Audio Visual Systems page 35 of 50

PDR Program Qualifications - Fauquier County
fauquier county purchase of development rights program progress ...
fauquier high school renovation and addition - Fauquier County
Print or Download - Fauquier County, Virginia
The American Battlefield Protection Program - Fauquier County
Your Anthem HealthKeepers Plan - Fauquier County
Your Prescription Drug 10-20-35 or 20% with ... - Fauquier County
Marriott Ranch Corporate Retreats - Fauquier County, Virginia
Good Times - Holiday Issue FINAL for Print - Oct ... - Fauquier County
8.5 Acres Commercial Land - Fauquier County, VA - JMC Investment ...
downloaded from this site - Fauquier County
Commonwealth of Virginia LUP-IPP Department ... - Fauquier County
Summer 2007 Newsletter - Fauquier County
Ware Washing Supplies - Fauquier County