Views
4 years ago

User manual - Fax-Anleitung.de

User manual - Fax-Anleitung.de

START COPY If the number

START COPY If the number you are calling is engaged or you cannot make a connection, your machine will automatically redial the number. If a connection is not made after the third attempt, the procedure will stop. Transmission now begins. The recipient fax machine will now transmit its sender identification, which will appear in your display. – 28 – +43 1 12345 FINE PHOTO BUSY TEL TEL/FAX TAM/FAX You can now check again whether you have dialled the correct number. If necessary you can interrupt transmission by pressing the STOP key. If the recipient machine has no sender identification stored, the display will show: After a few seconds the display will read alternately: If you wish to send more pages, press the START key while the first page is going through. As soon as it is through, you have 5 seconds to insert the next page. For every new page you want to send, press the START key whilst the previous page is going through. When the last page has gone through, the display will indicate the number of pages transmitted. SENDING ... FINE PHOTO BUSY TEL TEL/FAX TAM/FAX NEXT PAGE FINE PHOTO BUSY TEL TEL/FAX TAM/FAX PRESS START FINE PHOTO BUSY TEL TEL/FAX TAM/FAX 02 PAGES SENT FINE PHOTO BUSY TEL TEL/FAX TAM/FAX A transmission report will be printed out at the end of each transmission (see 5.9) and the machine will return to stand-by. If the transmission is not successful an error report will be printed out (see 5.9). During printing of the error report the error lamp flashes. Press STOP. Do not insert a new document until the report is completely printed out. Otherwise the document will be misaligned for sending or copying.

3.3 Receiving faxes - different reception modes You have no additional devices connected to your fax machine: and you want to: choose the mode: see for details: receive fax messages manually TEL 3.3.2 manual reception receive fax messages automatically TEL/FAX 3.3.2 automatic reception without additional devices, answering device switched off receive fax messages and telephone TAM/FAX 3.3.2 automatic reception without additional calls automatically devices, answering device switched on You have additional devices connected to your fax machine: and you want to: choose the mode: see for details: receive fax messages manually TEL 3.3.2 manual reception receive fax messages automatically TEL/FAX or 3.3.4 automatic reception with TAM/FAX additional devices All these options are explained in detail on the following pages. 3.3.1 Changing the mode FUNCTION 1 4 7 ∗ 2 5 8 0 3 6 9 # Select function 31. 31 MODE – 29 – FINE PHOTO BUSY TEL TEL/FAX TAM/FAX OK Press OK. MODE: TEL/FAX OK 3.3.2 Manual reception FUNCTION 1 4 7 ∗ 2 5 8 0 3 6 9 # FINE PHOTO BUSY TEL TEL/FAX TAM/FAX Select the desired mode with CURSOR LEFT or CURSOR RIGHT. MODE: TAM/FAX Press OK. The relevant pointer on the display will light up and the fax machine will be in the mode indicated. Change to TEL mode with function 31. The corresponding pointer on the display will light up. FINE PHOTO BUSY TEL TEL/FAX TAM/FAX 3 FAXSWITCH FINE PHOTO BUSY TEL TEL/FAX TAM/FAX 15-MAY-97 12:30 FINE PHOTO BUSY TEL TEL/FAX TAM/FAX Your fax machine will now operate just like a normal telephone. INCOMING CALL FINE PHOTO BUSY TEL TEL/FAX TAM/FAX

2. Getting started - Fax-Anleitung.de
ENGLISH 910 912 916 919 920 922 926 929 - Fax-Anleitung.de
Brother FAX-575/FAX-575e - User's Guide
Brother FAX-1820C - User's Guide
User Manual - Orficn.net
Fax Operators Manual - Zoom Imaging Solutions, Inc.
BRC-64 User Manual
User's Manual - Directory listing for
EdiView 32 User Manual - Edimax
User Manual - Home Depot
User Manual VXH264-16 - Crimehalt Security Specialists
PiXORD 6100 Surveillance Management System User's Manual