7.10 Multi-conferencing (*) (Service depending on the operator and depending on the model) If you have set up a multiconference, the screen shows this and displays the order number allocated to each party. A multi-conference is limited to 6 participants: 5 in a multi-conference and one additional call During a call, when pressing the key, the key changes function and gives access to different possibilities of actions with this call. Multi-conferencing enables you to talk to several callers (depending on the network capacity and on the model). 29 7. Call related features
Standard commands Sequences of standard keys also permit access to services such as call notification, call holding, multi-conferencing, and open up additional possibilities: 0 Reject a call holding or waiting (or multi-conference calls). 1 End the current call holding or waiting (or the multi-conference calls if there are any) and accept the call (or multi-conference calls). 1 X End the current call order number X. 2 Place on hold the current call (or multi-conference calls) and accept the call holding or waiting (or multiconference calls). 7. Call related features 30 2 X Place on hold the multiconference calls except for the current call order number X (private call). 3 Add a call holding (or multiconference calls) to the current call (or to the multiconference). Tel N° Place on hold the current call (or the multi-conference calls) and call another telephone number. Note: However, it is preferable to place the call on hold then dial, then call; this guarantees comfort and confidentiality (does not allow the call holding to hear the dialling tones whatever the configuration of the phone). End all calls except for a possible call waiting.