6-4 Maintenance + 5 - Remove the new toner cartridge from its box. Hold it firmly with both hands and shake t alternately in the directions shown by the arrows in the diagram below. + 6 - Holding the cartridge by its handle, slide it into the printer. Ensure that the four pins (two on either side) are properly aligned with the grooves in the printer. Remark : Use the colour-coded stickers marked "2", which are located both on the toner cartridge and the inside of the printer, for proper positioning. These two stickers should line up while installing the toner cartridge.
Maintenance The cartridge will click into position once it is correctly installed. + 7 - Shut the top flap by pressing it down gently but firmly until it locks into position. Turn the printer back on using the switch located on its left-hand-side. + Press OK on the scanner keypad. The display shows: INSERT GAUGE CARD 6-5 Safety Maintenance Operation Directory Settings Quick usage Installation Contents