Views
4 years ago

251274544 - Fax-Anleitung.de

251274544 - Fax-Anleitung.de

6-12 Maintenance +

6-12 Maintenance + Insert the SmartCard gauge into the appropriate slot ensuring that the chip is oriented as shown in the drawing below. Flèche verte + The display of the scanner keypad shows the following (assuming black toner cartridge): RENEW DRUM? CONFIRM = OK CANCEL = C + Press OK on the scanner keypad. + The display shows: OPERATION IN PROGRESS PLEASE WAIT + Once the SmartCard has been read, the display shows: RENEW DRUM RECORDED REMOVE CARD + Remove the SmartCard: = Caution - If the following message appears check whether the right side of the microchip card was inserted (green arrow): CANNOT READ CHECK DIRECTION

Maintenance &/($1,1* &OHDQLQJ WKH VFDQQHU·V UHDGLQJ GHYLFHV 6KHHW IHHG VFDQQHU When one or more vertical lines appear on transmitted copies or faxes, do the following steps: )ODW EHG VFDQQHU PRGHO RQO\ For an aptimum scanning quality, make sure that the glass of the flat-bed scanner is clean. Clean the glass with a solt lint-free cloth soaked with alcohol. &OHDQLQJ WKH SULQWHU Dust, dirt and paper debris on the outer surfaces and inside the printer can interfere with printer performance. Clean the printer regularly. Caution - Use a soft cloth to clean the printer. Never use abrasives or corrosive detergents. The fusing unit can become very hot during operation. Do not touch the area to avoid injury. Wait for at least 10 minutes after the printer has been turned off and make sure that the fusing unit has cooled before cleaning the interior of the printer. 6-13 A B + Open the scanning cover of the sheet-feed scanner by pressing the open key (A). + Clean the transparent scanning glass (B) with a soft lint-free cloth soaked with alcohol. + Close the scanning cover. + Make a copy in order to make sure that the symptoms are gone. Safety Maintenance Operation Directory Settings Quick usage Installation Contents