Your number - Fax-Anleitung.de
24 Error codes Error codes when sending faxes # 102 # 104 # 105 # 109 # 110 # 111 # 113 # 114 # 115 Error codes when receiving faxes # 152 # 153 # 154 # 158 # 160 # 161 Problem No document in the feeder. Fault on the telephone line. The receiving fax machine has a transmission error. The receiving fax machine is not responding. There is no signal from the receiving fax machine at the end of transmission. An error message is sent by the receiving fax machine at the end of transmission. The receiving fax machine requests a second transmission as there were too many transmission errors in the first transmission. The document is too long. Transmission of one page took too long (more than eight minutes). Problem An error message is received from the sending fax machine at the start of reception. The person polling the fax has entered an incorrect password. The sending fax machine does not send a signal at the start of reception. The sending fax machine does not send a standard signal. The machine is not correctly connected to the telephone line or there is no signal from the sending fax machine. At the end of the reception process the sending fax machine does not send a signal or the connection was interrupted.
# 166 # 167 # 168 # 169 Other error codes # 201 # 202 # 205 # 206 STOP BUTTON PRESSED NO RESPONSE There are repeated errors in the received data. The data received contains so many errors that a second transmission is needed. At the start of password-protected polling the machine detects that the wrong password has been entered on the sending fax machine. In attempting to poll a fax, the machine detects that the sending fax machine has not been set up correctly for polling. Problem The correct protocol signal is not sent during the transmission process. The correct protocol signal is not sent during the reception process. Transmission is canceled by the other fax user. There is not enough memory capacity during transmission. The STOP button was pressed during transmission. The other fax user does not answer during transmission and the connection is interrupted. 25