Views
4 years ago

Alcatel Applications Partner Program Inter-Working Report Partner

Alcatel Applications Partner Program Inter-Working Report Partner

8 Send one fax from Fax

8 Send one fax from Fax Server to OmniPCX Enterprise fax. Verify that the behavior is correct when the phone number used is not configured on the Gateway 9 ECM (Error Correction Mode) – Enable ECM on Fax Server and try sending faxes from Fax Server to the OmniPCX Enterprise facsimile and from this fax to Fax Server. As OmniPCX doesn’t support ECM, it changes systematically the ECM to disable. 8.2.2 Perturbations; with gatekeeper Description: Check the solution behaviors when network is perturb (internal gatekeeper used) Step Action N/A Result Origin of the problem Comment 1 Configure Brooktrout application OK 2 Send a fax from OmniPCX Enterprise facsimile to Fax Server. Verify that the behavior is correct when the phone number used is not registered on the gatekeeper. OK 3 Send one fax from Fax Server to OmniPCX Enterprise fax. Verify that the behavior is correct when the phone number used is not registered on the gatekeeper. OK 4 Send a fax from OmniPCX Enterprise facsimile to Fax Server. Verify that the behavior is correct when the gatekeeper is down. OK 5 Send one fax from Fax Server to OmniPCX Enterprise fax. Verify that the behavior is correct when the gatekeeper is down. OK Alcatel Applications Partner ProgramInter-working report Copyright © 2003 Alcatel, All rights reserved OK OK Edition 3 – Page 18

8.2.3 Reboot of the GD Description: Check the solution behaviors when network is perturb (reboot of GD) Step Action N/A Result Origin of the problem 1 Configure Brooktrout OK application 2 Send a fax from OmniPCX Enterprise facsimile to Fax Server. During data transmission, reset the OmniPCX Enterprise system GD board. 3 Send one fax from Fax Server to OmniPCX Enterprise fax. During data transmission, reset the OmniPCX Enterprise system GD board. 8.2.4 OmniPCX Enterprise system phones call Fax Server Description: Check the behavior when a phone calls the Fax Server Step Action N/A Result Origin of the problem 1 Configure Brooktrout application OK 2 Launch tfax.exe to be in OK reception mode 3 Make a call from the analogue set to the Fax Server; Verify that no issue are generated. Alcatel Applications Partner ProgramInter-working report Copyright © 2003 Alcatel, All rights reserved OK OK OK Comment Comment Edition 3 – Page 19

[PDF] Values and Cost Allocations of Surface-Water Use and Treatment: An Application of Linear Programming to Water Resources Planning (Classic Reprint) Download by - Ricahrd A. Andrews
Alcatel Applications Partner Program Inter-Working Report - PABX
Alcatel Applications Partner Program Inter-Working Report - Konftel
Alcatel-Lucent Application Partner Program Inter-Working ... - teles
View Interworking report - Konftel
hp developer & solution partner program terms - Application ...
Download OmniPCX Enterprise report
Update on the Virginia Enterprise Applications Program
Working Holiday Maker visa program report
application for a work permit under the live-in caregiver program
Content Management: Application vs. Application ... - Gilbane Report
Report from the working group on Applications and Statistics ...
Telecom Application Programming Interface (API) Market is expected to grow at high CAGR during the forecast period 2016-2025 |The Insight Partners