Power Analysers & Recorders cont'd. - Ferret

www.techrentals.com.au
Insulation Testers & Meggers
to 20kV cont’d.
HIO,3454-51-3 (8404) AU
Continuity function with 200mA and 3 range voltage selectable 250V, 500V
& 1kV. Digital display, auto-discharge, live-wire warning, safety system for
high voltage measurement, sliding cover. Backlit LCD. Checks ground wire
continuity with a short circuit current of 200mA. Ground continuity testing
@ 1kV. Other functions:- insulation and low resistance mode - comparator,
measurement value hold, insulation resistance mode - auto discharge,
insulation and AC voltage mode. Maximum rated working voltage 600VAC.
Hioki 3455 High Voltage
Insulation Tester
HIO,3455HVIT-5kV (8403) AU/MY
PI and DAR function to check insulation quality and
step voltage test to detect for signs of deterioration.
Generates test voltages from 250V to 5kV in commonly
used presets of 250V, 500V, 1kV, 2.5kV & 5kV, or set
to desired level by increments or decrements of 25V
or 100V. Insulation diagnoses for automatic calculation and indication of PI
(Polarisation index) and DAR (Dielectric absorption ratio), step voltage testing
and temperature correction. Large memory stores up to 100 manual records
and a logging function for 10 data (360 times). Stored data with date and time
may be displayed on the LCD or down-loaded.
Megger 10-01 10kV Insulation Tester
MEG,10-01-10kV (8424) AU
Compact, Microprocessor controlled
high voltage DC Insulation tester. Test voltage:
500V to 10kV.
Megger BM21 500V/1/2/5kV Insulation Test Set
MEG,BM21 MY
measurement. Capacitance measurement at end of test. Automatic discharge
of capacitance. In-built test timer. Insulation burn mode - short circuit current
1mA nominal. Battery life 8h, in-built charger for charging from mains or
12VDC.
Megger FT6/12 Ionisation, Leakage & Breakdown Tester
MEG,FT6/12 (8433) AU
AC ranges 0 to 2kV, 0 to 6kV, DC ranges 0 to 4kV, 0 to 12kV. Output currents
7.4mA, 8.9mA AC & 2.1mA, 2.5mA DC. Breakdown and flashover indication
by latching indicator for periods exceeding 1ms. Current threshold 100μA to
1mA. Ionisation indication by internal speaker. Meter indication of AC, DC and
AC capacitive currents. Complete with probes.
Megger MIT1020 Diagnostic 10kV
Insulation Resistance Tester
MEG,MIT1020-10kV DIT (8425) AU
Backlit display, variable test voltage from 50 to
10,000V, Automatic IR, PI, DAR, SV and DD tests,
results. IEEE 43-2000 recommends the use of 10kV for
motor windings rated above 12kV. Protection rating of
IP54. Mains or battery powered.
Megger S1-1052 High Current
Insulation Resistance Tester 10kV
MEG,S1-1052 10kV-DIT (8413) AU
High output current 5mA for fast charging of capacitive loads. Testing
up to 10kV, mains or battery powered, digital/analogue backlit display,
variable test voltage from 50 to 10,000V, automatic IR, PI, DAR, SV and DD
39
ELECTRICAL POWER
Insulation Testers & Meggers to
20kV cont’d.
Megger S1-552 High Current
Insulation Resistance Tester 5kV
MEG,S1-552 5kVDIT (8415) AU
High output current 5mA for fast charging of capacitive
loads. Testing up to 5kV, mains or battery powered,
digital/analogue backlit display, variable test voltage
from 50 to 5,000V, automatic IR, PI, DAR, SV and DD tests. Measures to
Oil, Hipot & VFL Testers above 20kV
See also Cable & Pipe Tracers & Fault Locators on page 29
Baur DAP75 Insulating Oil Tester
BAU,DPA75 (4626) AU
Fully automatic insulation oil tester. Output voltage 0 to 75kV RMS. Selectable
programmes to international standards. Integral printer. RS232 interface. One
transit case on wheels. Total weight is 35kgs.
High Voltage Inc PFT303 Test Set
30kV/50Hz AC Hi Pot Tester
HIV,PFT303 (8401) AU
Rated 1kVA into resistive load, 3kVA into
capacitive load. Duty cycle at 3kVA ½h on 2h off,
at 2kVA 1h on 1h off. Tests the integrity of items
including insulating materials, isophase bus duct,
switchgear, transformers, vacuum bottles & interrupters, vacuum switches,
automatic circuit reclosers, bushings, fuses, arrestors, circuit breakers,
transformers, capacitors, motor and generator windings.
High Voltage Inc PFT503, 50kV AC Test Set
HIV,PFT503 (8400) AU
Rated 1kVA into resistive load, 3kVA into capacitive load. Duty cycle at 3kVA
½h on 2h off, at 2kVA 1h on 1h off.
High Voltage Inc Very Low Frequency
(VLF) 6022 60kV Hi-pot Test Set
HIV,VLF6022 (8461) AU
For field testing of AC high/medium voltage
cables, bushings, and insulators. Input
230V, 50Hz, 6A peak, 2.5A average.
Output sinusoidal, 0 to 60kV AC peak,
frequency 0.1, 0.05 & 0.02Hz. Duty continuous. Test load capacitance 1.1μF
(approx 3kms of cable at 0.1Hz), 2.2μF (approx 9kms of cable at 0.05Hz)
& 5.5μF (approx 13kms of cable at 0.02Hz). Display 0 to 60 peak kV.
Interconnect cable length 3m, control unit to HV transformer. RG8/U output
cable length 3m. Shorting stick braid 6m. HV tank and control units shipped in
travel cases weighing 70 & 40kg respectively.
High Voltage Inc VLF-90CM 90kV Test Set
HIV,VLF90 (8462) AU
Very low frequency (VLF-90CM) AC hipot test set
with 90kVAC peak output, is suitable for testing
cables up to 50kV. High load capacity enables it
to test up to approx 7 miles of cable, depending
on type. Includes a charging current and load
capacitance meter, test dwell timer, and polarity
indicating lights. Output voltage and frequency, sinusoidal 0 to 90kVAC
peak & selectable, 0.1, 0.05, 0.02Hz. Test frequency and rated loads with
approximate cable lengths are: -0.1Hz/0.55μF 1,673m of cable, 0.05Hz/1.1μF
3,353m of cable, 0.02Hz/2.2μF 6,706m of cable. Kilovoltmeter scaled 0 to
100kVAC peak, ammeter scaled 0 to 100mA AC and 0-6μF load capacitance.
Weight of the unit 167kgs. HV Cable output is 6m flexible, shielded x-ray with
alligator clamp, inter connect cable length 3m, shorting stick 6m lead with clip.