Powerful! - FLEX

flex.tools.com

Powerful! - FLEX

Powerful!

FLEX Cordless drill driver and rotary hammer drills.


Cordless drill driver

Two speeds on the ALi 10.8 G ensure optimum

speed selection for drilling and screwdriving.

ALi 10.8 G includes an LED lamp as standard

equipment and is powered by the auxiliary

battery.

2

The ergonomic grip and low weight make the

ACH 14.4 easy to use in all positions.

The easy-change battery pack reduces work

interruptions to a minimum.

FLEX cordless

tools have the

power.

Designed for professional continuous

operation constructed appropriately

robust – e.g solid, yet light aluminium gear

housing and completelymetal drill chucks

on the cordless drills and hammer drills

ensure lasting stability and long service

life.

The user friendliness is exemplary:

with non-slip rubber grip to improve

the feel in the hand and an ultrasensitive

accelerator trigger switch with quick stop.

The benefits are innumerable.

Advantages of lithium ion

technology

- No memory effect

- Powerful: full battery power from

the first to the last screw

- Low weight, lighter than conventional

batteries, better to handle

- FLEX Protection system: protects

from overloading, overheating and

deep discharge.


ALi 10,8 G

2 speed cordless drill/screwdriver

with lithium ion technology

• 20 torque and 1 drill setting

• Quick-action chuck with spindle lock

• Exchangeable lithium ion battery 1,3 Ah

• No memory effect

• Integrated LED light

• Rapid battery charger (charge time 60 min)

• Small machine with lots of power

• Ergonomically designed, non-slip, soft grip handle for safe,

comfortable working

• Perfect for drilling in wood, plywoods, plastics and metal.

Thanks to its compact design it is especially good when working

in restricted spaces

SPECIFICATIONS

Battery voltage 10,8 V

Battery capacity 1,3 Ah

Torque max. (drill setting) 38 Nm

Torque positions 20+1

No load speed 1st gear 0-345 rpm

No load speed 2nd gear 0-1240 rpm

Chuck Ø 0,8-10 mm

Weight with battery 1,1 kg

Type Order no.

ALi 10,8 G 338.583

Standard equipment:

2 battery pack

1 rapid battery charger

1 LED light

Bit set

1 plastic carry case

Accessories ALi 10,8

Rapid charger

LED light

Battery pack

Cordless drill driver

Charging time 60 min for battery pack 10.8 V/1.3 Ah Li-Ion.

Battery not included. The standard auxiliary battery in the

ALi 10.8 V series or battery pack 336.319 can be used.

Li-Ion battery pack 10.8 V/1.3 Ah for ALi 10.8 series.

QP Order

no.

1 336.327

QP Order

no.

1 336.335

QP Order

no.

1 336.319

3


Cordless drill driver

AC 14,4 ACH 14,4

2-speed cordless drill driver 14.4 V

with lithium ion technology

• Exchangeable lithium ion battery 2,6 Ah

• No memory effect

• Integrated LED light

• Quick-action chuck with spindle lock

• 15 torque settings and 1 drill setting

• Clockwise and counterclockwise rotation; middle setting: safety

lock

• Charge indicator

• Rapid battery charger (charge time 60 min)

• Ergonomically designed, non-slip, soft grip handle for safe,

comfortable working

• Ideally suited for use on the construction site. Max. torque: soft

torque 25 Nm, hard torque 75 Nm

• Two speeds for excellent results in drilling wood, composite wood

products, plastic and metal

SPECIFICATIONS

Battery voltage 14,4 V

Battery capacity 2,6 Ah

Torque max. (drill setting) 25/75 Nm

No load speed 1st gear 0-500 rpm

No load speed 2nd gear 0-1800 rpm

Chuck Ø 1,5 - 13 mm

Weight with battery 1,9 kg

Type Order no.

AC 14,4 348.449

4

Standard equipment:

2 battery pack

1 rapid battery charger

1 plastic carry case

2-speed cordless impact drill 14.4 V

with lithium ion technology

• Exchangeable lithium ion battery 2,6 Ah

• No memory effect

• Integrated LED light

• Quick-action chuck with spindle lock

• 15 torque settings and 1 drill setting

• Clockwise and counterclockwise rotation; middle setting: safety

lock

• Hammer drilling function

• Charge indicator

• Rapid battery charger (charge time 60 min)

• Ergonomically designed, non-slip, soft grip handle for safe,

comfortable working

• Ideally suited for use on the construction site. Max. torque: soft

torque 25 Nm, hard torque 75 Nm

• Two speeds for excellent results in drilling wood, composite wood

products, plastic and metal

SPECIFICATIONS

Battery voltage 14,4 V

Battery capacity 2,6 Ah

Torque max. (drill setting) 25/75 Nm

No load speed 1st gear 0-500 rpm

No load speed 2nd gear 0-1800 rpm

Chuck Ø 0-27000 rpm

Weight with battery 1,5 - 13 mm

Weight with battery 1,9 kg

Type Order no.

ACH 14,4 348.430

Standard equipment:

2 battery pack

1 rapid battery charger

1 plastic carry case


Acessories AC 14,4/ACH 14,4

Battery pack

Li-Ion rechargeable battery pack 14.4 V/2.6 Ah for AC and ACH

T

QP Order

no.

1 348.708

Diamond dry drill bits

For drilling without water using cordless drill drivers

or drills. Ideal for drilling dowel holes in fine stoneware

tiles (up to hardness 5), granite and marble.

Advantages at a glance

• low technical effort in comparison with wet drilling,

only cordless screwdriver required

• no noise nuisance

• no dirty water

• no contamination of the tile grout with drilling sludge

• subsequent cleaning and drying of the work area not

required

Tips and tricks:

The service life of the drill bit is increased many times

if the drill bit is cooled down briefly in water after each

drilling process. The cooling process removes particles

stuck to the cutting edges. To work effectively and

economically, the DD-DRY should be used exclusively for

drilling through hard coverings. Dowel holes in masonry

or concrete should be made with HW drill bits.

Optimum cooling by

wax filling. The wax

is melted by the heat

generated during the

drilling process and

therefore cools the diamond

impregnation.

The multi-layered diamond

impregnation

ensures a maximum

service life and rapid

work progress.

Diamond impregnation

in the hollow spindle

crushes the drill core

and reduces the drilling

resistance.

Designation D

in mm

T

in mm

L

in mm

QP Order no.

DD-DRY D6x30 HEX 6 30 80 1 386.286

DD-DRY D8x30 HEX 8 30 80 1 386.294

DD-DRY D10x30 HEX 10 30 80 1 386.308

DD-DRY D14x30 HEX 14 30 80 1 386.316

Rapid charger

Charging time 60 mins.. for Li-Ion battery 14.4 V/2.6 Ah

QP Order

no.

1 348.694

Tile drill bits

For drilling without water using cordless drill drivers

or drills. The extremely hard tip of the drill bit is pressed

gently onto the surface of the tile. This makes a precision

mark for the required drill hole. As the drill bit is

self-centring, it cannot slip on hard surfaces. Ideally

suited for drilling dowel holes in tiles and fine stoneware

up to hardness 3.

Tips and tricks:

The drill bit drills through the covering (e.g. tile) only.

A suitable carbide drill bit should be used for the material

(masonry, concrete, etc.) under the covering. Insert tile

drill bit TD clockwise only.

D=Ø D

The hollow shank redu-

Absolutely precise spot

ces the weight and

drilling. The carbide

stores the coolant.

drill point breaks the

Hexagonal shank AF

for clamping in 13mm

surface coating and

prevents the drill bit

T

chuck, prevents over-

from wandering.

tightening in the chuck

The vacuum-welded

and damage to the

carbide cutting edge

L shank. The three chuck

jaws are positioned

ensures maximum

service life and a

L

fully on the clamping

surfaces and provide

the best grip.

durable connection.

Designation D

in mm

T

in mm

Cordless drill driver

Cutting edge with

diamond cut allows

exact spot drilling and

tear-free drilled holes.

The spiral spindle

guarantees quick

removal of the drilling

dust.

The hardened shank

reduces damage and

guarantees optimum

concentricity.

L

in mm

QP Order no.

TD D5x50 D10 5 50 110 1 386.324

TD D6x50 D10 6 50 110 1 386.332

TD D8x50 D10 8 50 110 1 386.340

5


2,5 kg Rotary hammer drill

CHE 2-26 SDS-plus. The compact multi-talent.

The light 2.5 kg and compact 800 watt CHE 2-26 SDS-plus hammer drill and chisel is ideal for drilling, hammer-drilling in

masonry and concrete, for plugs, anchoring systems and through-holes. The 2.5 kg hammer drill is ideal for light-duty chiselling

work and removal of plaster and tiles.

Small but really fine. Even wall tiles present no difficulty for the CHE 2-26 SDS-plus thanks to its chiselling function. The chisel can be set in all positions.

The CHE 2-26 SDS-plus has no trouble at all in dealing with plug

holes and through-holes up to 26 mm for electrical cables and

tubes.

6

No tools are needed to change drills and chisels thanks to SDS-plus.

As a result, the CHE 2-26 SDS-plus can be rapidly set to all the requirements.


CHE 2-26 SDS-plus

Universal rotary hammer drill 2,5 kg, SDS-plus

• Light 800 watt hammer drill and chisel hammer, pistol design

with the clockwise/anticlockwise rotation function

• Hammer drilling

• Depth limit gauge: for precision drilling

• Rotation stop for chiselling

• Max. drilling range up to 26 mm

• Accelerator switch with lock-on function

• Ideal for drilling and hammer drilling, diameters from 4-18 mm

in masonry and concrete for dowel fixings or through-holes.

• For light-duty chiselling work when removing plaster and tiles

SPECIFICATIONS

No load speed 0-1100 rpm

Blows per minute 0-5200 rpm

Single impact energy (EPTA) 2,3 J

Max. drill hole Ø in concrete 26 mm

Max. drill hole Ø

in masonry (drill bit)

68 mm

Max. drill hole Ø in wood 30 mm

Power input 800 watt

Tool fixture SDS-plus

Weight 2,5 kg

Type Order no.

CHE 2-26 SDS-plus 365.904

Standard equipment:

1 handle

1 drill depth stop

Carry case

2,5 kg Rotary hammer drill

Easy-to-operate switch for

the following functions:

1 Drilling without hammer

2 Drilling with hammer

3 Continuous chisel positioning

4 Hammer function for

chiselling

Acceleration trigger, lock-on

function and a clockwise/

anticlockwise function.

The soft grip ensures a

secure hold.

The additional handle

with an integrated depth

stop can be easily rotated

and locked at the desired

position. With the SDS-plus

you can quickly change both

drills and chisels without

any tools.

7


5 kg Rotary hammer drill

CHE 5-45 SDS-max. Handy 5 kg combined hammer drill.

The handy and powerful 1100 watt CHE 5 -45 SDS-max hammer drill and chisel in L form has a hammer-impact drill function,

chisel function and a rotation stop for chiselling with vibrationdampened handle. It also has a service display. Regular

maintenance greatly extends the life of the machine.

The CHE 5-45 SDS-max is ideal for drilling, hammer-drilling in both masonry and concrete. For example, drilling holes for anchoring systems and

through-holes. Suitable for light-duty chiselling to remove plaster and masonry as well as lightweight concrete.

8


CHE 5-45 SDS-max

Universal rotary hammer drill, 5 kg, SDS-max

• Handy L-design 1100 watt rotary hammer drill and chisel hammer

• Hammer drilling

• Rotation stop for chiselling

• Max. drilling range: up to 45 mm with hammer drill, 80 mm

drilling with a core drill, 90 mm drilling with carbide metal drill

bit

• With a variable speed setting for optimum speed depending on

requirement and tool

• With supplementary handgrip and vibration-dampened handle

• Ideal for hammer-drilling, Diameter 10-32 mm in masonry and

concrete for composite or injection anchoring systems and

through-holes

• Suitable for light-duty chiselling work to remove plaster,

masonry and lightweight concrete

• The integrated service display indicates the next change for

carbon brushes as well as the service interval

SPECIFICATIONS

No load speed 235-500 rpm

Blows per minute 1350-2870 rpm

Single impact energy (EPTA) 7,1 J

Chisel positions 12

Max. drill hole Ø in concrete 45 mm

Max. drill hole Ø

in masonry (drill bit)

105 mm

Power input 1100 watt

Tool fixture SDS-max

Weight 5,9 kg

Type Order no.

CHE 5-45 SDS-max 365.912

Standard equipment:

1 drill depth stop

1 handle

1 tube of grease

Carry case

5 kg Rotary hammer drill

The additional handle

with an integrated depth

stop can be easily rotated

and locked at the desired

position. With the SDS-max

you can quickly change both

drills and chisels without

any tools.

Setting of the 12 chisel

positions.

Easy-to-operate switch for

the following functions:

Drilling with hammer and

chisel functions.

The vibration-dampened

and anti-slip handle ensures

a secure hold and eases

strain on the user.

With a variable speed

setting for optimum speed

depending on requirement

and tool

The CHE 5-45 SDS-max has

both a power system (green)

and service display. Send the

machine to FLEX customer

service should the service

display (red) light up.

Keeping to the maintenance

intervals clearly extends the

life of the machine.

9


5 kg Demolition hammer

10

DH 5 SDS-max.

The powerful 5 kg

demolition hammer.

The DH 5 SDS-max 5 kg demolition hammer is very handy and

compact. With its powerful and sturdy 1050 watt motor it is

ideal for medium-duty chiselling work in concrete and masonry

particularly in walls and ceilings, for concrete face-lifting, tile

and plaster removal and for through holes in walls and floors.

It has a radially and axially hinged additional handle.

This allows the user to always set the optimal gripping position.

The rear grip is equipped with vibration damping. This allows

the user to work longer without tiring – even in continuous use.


DH 5 SDS-max

Demolition hammer, 5 kg, SDS-max

• Very handy and compact L-design 1050 watt chisel hammer

• With side handle, can be both radially and axially rotated and

vibration-dampened handle

• Ideal for medium-duty chiselling work in concrete and masonry,

especially in walls. Concrete face-lifting, removal of tiles and

plaster and knocking-through in walls and floors

SPECIFICATIONS

Blows per minute 3500 rpm

Power input 1050 watt

Single impact energy (EPTA) 6,7 J

Chisel positions 12

Tool fixture SDS-max

Weight 5 kg

Type Order no.

DH 5 SDS-max 365.920

Standard equipment:

1 handle

1 tube of grease

Carry case

5 kg Demolition hammer

The vibration-dampened

and anti-slip handle ensures

a secure hold and eases

strain on the user.

Setting of the 12 chisel

positions.

The additional handle

is axially and radially

adjustable. For an optimum

hold and precision guidance.

11


Screwing and drilling

Accessories CHE 2-26 SDS-plus

SDS 2-plus drill

SDS-plus flat chisel

SDS-plus sharp chisel

12

Drill with 2 solid carbide alloy cutters, reinforcement chamfer

and centering point for easy, precision-point working.

Asymmetrical,high-capacity double conveyor spirals for quick

transfer of the drill dust. Core reinforcement for maximum

energy transfer from hammer drill to drill tip. Vibration-damping

and also conveys more energy to the cutting bit. Ideal for

drilling in concrete, masonry and natural stone.

Diameter in

mm

Length

in mm

QP Order

no.

4 110 1 367.931

5 110 1 367.958

6 110 1 367.966

5 160 1 367.974

6 160 1 367.982

8 160 1 367.990

10 160 1 368.008

12 160 1 368.016

6 210 1 368.024

8 210 1 368.032

10 210 1 368.040

12 210 1 368.059

14 210 1 368.067

16 210 1 368.075

8 260 1 368.083

10 260 1 368.091

12 260 1 368.105

14 260 1 368.113

16 310 1 368.121

18 200 1 368.148

20 200 1 368.156

18 450 1 368.164

20 450 1 368.172

22 450 1 368.180

25 450 1 368.199

Extremely hard, ideal for demolition work.

Designation Dimensions

in mm

Extremely hard, ideal for demolition work.

QP Order

no.

flach 20 x 250 1 368.490

Designation Dimensions

in mm

QP Order

no.

spitz 250 1 368.504

SDS-plus broad-flat chisel

SDS-plus tile chisel

Chisel/drill set SDS-plus

The broad flat chisel is excellent for stripping plastered walls.

Higher removal rate due to wedge effect. More material removal

per chisel stroke.

Designation Dimensions

in mm

The tile chisel is suited for renovation work. It has a large leaf

width, can be optimally placed in joints and also preserves the

underground.

Set consisting of:

SDS 2-plus drills

1x 5 Ø x 110 mm,

1x 6 Ø x 110 mm,

1x 6 Ø 160 mm,

1x 8 Ø x 160 mm,

1x 10 Ø x 160 mm,

1x sharp chisel SDS-plus 250 mm,

1x flat chisel SDS-plus 250 mm.

QP Order

no.

spat 40 x 250 1 368.512

Designation Dimensions

in mm

QP Order

no.

gekröpft 40 x 250 1 368.628

Quick-release drill chuck for CHE 2-26 SDS-plus

SDS-plus adapter

Diameter in

mm

Adapter for 1/2“ drill chuck (Order No. 272.639).

QP Order

no.

1 368.571

QP Order

no.

1,5-13 1 272.639

QP Order

no.

1 368.652


Accessories CHE 5-45 SDS-max

SDS 2-max drill

SDS 4-max drill

Drill with 2 sharp carbide cutters. For drilling in concrete,

masonry and natural stone.

Diameter in

mm

Length

in mm

QP Order

no.

12 340 1 368.202

14 340 1 368.210

15 340 1 368.229

12 340 1 368.237

14 540 1 368.245

15 540 1 368.253

The drill tipped 4-cut head design ensures centric guidance

in the drill hole. Two additional secondary cutters protect the

drill from impacting on any steel reinforcement. Moreover, the

special spiral design reduces vibrations. Highly suitable for

drilling in reinforced concrete.

Diameter in

mm

Length

in mm

QP Order

no.

16 340 1 368.261

18 340 1 368.288

20 320 1 368.296

22 320 1 368.318

25 320 1 368.326

28 370 1 368.334

30 370 1 368.342

32 370 1 368.350

35 370 1 368.369

16 540 1 368.377

18 540 1 368.385

20 520 1 368.393

22 520 1 368.407

24 520 1 368.415

25 520 1 368.423

28 570 1 368.431

30 570 1 368.458

32 570 1 368.466

35 570 1 368.474

40 570 1 368.482

Designation Dimensions

in mm

Screwing and drilling

Accessories CHE 5-45 DH 5 SDS-max

SDS-max flat chisel

SDS-max sharp chisel

SDS-max broad-flat chisel

SDS-max tile chisel

SDS-max chisel set

Extremely hard, ideal for demolition work.

QP Order

no.

flat 25 x 400 1 368.539

Extremely hard, ideal for demolition work.

Designation Dimensions

in mm

QP Order

no.

pointed 400 1 368.547

The broad flat chisel is excellent for stripping plastered walls.

Higher removal rate due to wedge effect. More material removal

per chisel stroke.

Designation Dimensions

in mm

QP Order

no.

spat 50 x 400 1 368.555

The tile chisel is suited for renovation work. It has a large leaf

width, can be optimally placed in joints and also preserves the

underground.

Designation Dimensions

in mm

QP Order

no.

cambered 50 x 300 1 368.563

Set consisting of 1x sharp chisel 400 mm SDS-max, 1x flat

chisel SDS-max 25 x 400 mm.

QP Order

no.

1 368.601

13


Core drilling

Drilling where low noise, no dust or vibration is requested, is

where the FLEX core drilling technology comes into its own.

Without vibration, a concrete core is cut out with absolute

precision - even reinforcing bars pose no problem. Ideal for

drilling and through hole work in sensitive areas, such as

hospitals, laboratories, computer facilities, office buildings

and schools, etc.

With our range of dry and wet core drills and the complementary

accessory range, we provide you with the tools for

effective, low-vibration and economical working.

The innovative extraction

system in conjunction

with the FLEX

VCE 45 M AC reduces the

production of healthharmful

drilling dust

to a minimum.

Centring star for pinpoint

accuracy. To ensure the

optimum positioning of

the centring bar in each

drill bit, the FLEX accessory

programme includes

the matching centring

star.

Quick-Snap-System

Only the FLEX Quick-snap system with its removable

extractor ring allows work to be done with and without dust

extraction using the same basic holder. Core bits: no special

core bits are required. All core bits with a standard M16

thread can be used. (Special core bits are needed when dust

extraction is used.)

1 M16 thread core bits are used with the Quick-Snap system.

2 The drill bit chuck allows drill bits to be replaced without the use of a

chuck key.

3 Comprising of a removable extraction ring and the basic holder. Forextracting

health-harmful dusts and increasing tool life.

4 The rotating adapter is used with the extractor ring for connection to the

FLEX vacuum cleaners when drilling.

1 2

4

3


BH 612 VR BH 812 VV

2-speed core drill for dry drilling

• VR microprocessor control: with tachogenerator constant speed

control, soft start, continuous speed control trigger, restart

protection after power failure, overload protection, temperature

monitoring and speed selection

• Long additional handle: turns and latches in pre-set positions to

absorb high torque in freehand operation

• Safety slip clutch: offers protection if the core drill is jammed

• Clamping neck: 53 mm, suitable for application in drilling stands

• Mechanical 2-speed gear unit and variable, electric speed setting

provide optimum speeds for a wide range of drilling diameters

• Ideal for dry drilling

SPECIFICATIONS

Power input 1500 watt

Power output 1000 watt

Machine connection 5⁄8“-16 UN

Speed under load

1st/2nd gear

0-1000 /

0-2500 rpm

Max. drilling Ø masonry 120 mm

Weight 4,1 kg

Type Order no.

BH 612 VR 333.255

Standard equipment:

1 handle

1 open-ended wrench SW 22

1 drill depth stop

1 clamp fitting with ratchet clip

1 plastic carry case

Core drilling

Core drill for dry drilling

• VV electronic control: constant speed control, soft start

with continuous speed control trigger, overload protection,

temperature monitoring and speed selection

• Long additional handle: turns and latches in pre-set positions to

absorb high torque in freehand operation

• Safety slip clutch: offers protection if the core drill is jammed

• Clamping neck: 53 mm, suitable for application in drilling stands

• Ideal for dry drilling

• Mechanical 2-speed gear unit and variable, electric speed setting

provide optimum speeds for a wide range of drilling diameters

SPECIFICATIONS

Power input 1800 watt

Power output 1200 watt

Speed under load

1st/2nd gear

0-1000 /

0-3800 rpm

Tool fixture 5⁄8“-16 UN / M 16

Max. drilling Ø masonry 180 mm

Weight 4,2 kg

Type Order no.

BH 812 VV 260.190

Standard equipment:

1 handle

1 open-ended wrench SW 24

1 open-ended wrench SW 22

1 wrench case

1 drill depth stop

1 clamp fitting with ratchet clip

1 adapter 5/8“-16UN/M16

1 plastic carry case

15


Core drilling

Accessories BH 612 VR, BH 812 VV

Diamond drill bit with dust extraction, universal

16

Dry, M 16 internal thread, for masonry, with

dust extractor for quick-snap system, useful

length 80 mm.

Diamond drill bit with dust extraction, abrasive

Dry, M 16 internal thread, for masonry, with

dust extractor for quick-snap system, useful

length 80 mm.

Diamond drill bit with dust extraction, specially soldered

Dry, M 16 internal thread, for dense sand-lime

bricks, with dust extractor for quick-snap

system, useful length 80 mm.

Diamond drill bits with dust extractor for Quick-Snap

Suction rotor Quick-Snap

Drill adapter Quick-Snap

Centering mount Quick-Snap

suitable

– not suitable

Dry, M 16 inner thread, for masonry, with dust

extraction for Quick-Snap system, effective

length 400 mm.

Extracts health-hazardous dusts and thereby

increases the drill bit‘s service life. Connection

for standard drill bits M 16, by tool-free

drill bit exchange. Light rotor with excellent

suction power; dry drilling is also possible

with the same system without extraction.

Quick and simple cleaning by tool-free

removal of the suction unit. Connection

dimensions 5/8“ UN 16. Consisting of: Rotor

and 1 drill adapter 340.235.

For screwing onto the drill bits / drill bits for

socket outlets. Connection: M 16.

Diamond drill bit for socket outlets, magnetic

with drill.

Diameter in mm Segments QP Order no.

BH 612 VR

BH 812 VV

68 Ø 3 1 349.062

82 Ø 4 1 349.070

68 Ø 3 1 349.100

82 Ø 4 1 349.119

68 Ø 3 1 349.127

82 Ø 4 1 349.135

68 Ø 1 349.143

102 Ø 1 349.151

152 Ø 1 349.178

1 340.243

1 340.235

1 340.227


Accessories BH 612 VR, BH 812 VV

Centering bar Quick-Snap

Centering star Quick-Snap

For diamond drill bits, effective length

400 mm, magnetic with drill. Without

centring star.

For centring bar 340.200, fits drill bit

Ø 68 mm.

For centering bar 340.200, fits drill bit

Ø 102 mm.

For centering bar 340.200, fits drill bit

Ø 152 mm.

Suction adapter for Quick-Snap

Adapter

Adapter 32/36 mm, can be rotated, tapered,

hard. To connect the 32 mm hose with the

suction rotor 340.243

Adapter 5/8“-16 UN to M 16 for connecting

the machine directly to the drill bit.

Centering aid with clamp fitting

Extension for centering aid

Plastic multi-carrying case

For drill bits with an effective length of

180 mm.

For drill bits with an effective length of

400 mm.

Perfect fitting, impact resistant carrying

case for LD 3206 C, BH 612 VR, BHI 822 VR,

BHW 812 VV, BH 812 VV, SR 602 VV, SK 602 VV.

Core drilling

Diameter in mm QP Order no.

BH 612 VR

BH 812 VV

1 340.200

68 Ø 1 340.162

102 Ø 1 340.146

152 Ø 1 340.111

1 340.081

1 255.424

1 259.491

1 255.468

1 329.908

17


Wall chaser

The FLEX wall chaser.

It does you a good turn.

Cutting slots with 2 parallel running FLEX high-performance

diamond cutting discs. The middle partition can then be

broken out using the supplied slot breaker.

Only the FLEX wall chaser allows changeover from vertical

pull cutting to horizontal push cutting. Unlock, swivel

the motor, lock - finished! Fatigue-free working in both

directions!

Powerful in every position. The wall chaser MS 1706 FR cuts grooves

effortlessly into walls, limestone and porous concrete. Its patented,

swivelling motor makes horizontal push cutting as well as vertical

pull cutting possible.

Arbeitsrichtung

Arbeitsrichtung

Arbeitsrichtung

It does not matter in which direction

you are cutting. The swivelling vacuum

hose adapter allows for hinderence

free working.

The disc guard can be opened and the

quick-clamp nut loosened without

any additional tools. In this way you

can change the diamond cutting discs

and quickly adjust the distance rings

according to the desired groove width.

Patented swivel-mounted motor

(EP1693169) allows for push and pull

cutting.

You can use the scale - which is divided

into 5 mm increments - on the disc

guard to set how deep the milled cut

should be.

MS 1706 FR Set

Wall chaser for push and pull cutting

• FR electronic control: with tachogenerator constant speed control,

soft start, overload protection and temperature monitoring

• Patented swivel-mounted motor (EP1693169) allows for push

and pull cutting.

• Optimal dust extraction and maximum safety due to enclosed

guard

• Tool-free blade changing and slit width adjustment

• Rotating adaptor for dust extractor

• Tool-free cutting depth adjustment

• Plunge cut stop

• Chases two parallel slots up to 35 mm deep and 30 mm wide

• Slot breaker for easy removal of the remaining material without a

hammer

• This machine is also available in 110 V

SPECIFICATIONS

Cutting depth 0-35 mm

Groove width 10-30 mm

Disc Ø 140 mm

No load speed 7500 rpm

Power input 1400 watt

Power output 950 watt

Tool fixture M 14

Weight 4,6 kg

Type Order no.

MS 1706 FR Set 329.673

Standard equipment:

2 Diamantjet VI-Speedcut-cutting

disc 140 mm Ø

1 side handle

1 SDS-Clic quick-clamp nut M 14

Distance spacers

Stacking discs

Clamping flanges

1 web remover

1 adapter for dust extractor

Cable clip

1 plastic carry case


LE 9-10 125 L 3906 C

Universal 900 watt angle grinder, 125 mm

• Microprocessor electronics: with tachogenerator constant speed

control, speed control, soft start, restart protection after power

failure, overload protection and temperature monitoring

• Motor: powerful, strong motor for quick working progress

• With double winding protection from metal dust; reduces motor

wear and lengthens service life

• Tool-free adjustment of safety guard

• Side handgrip

• This universal angle grinder is suited for steel/metal surface

finishing, for work on the site/renovation as well as for vehicle

bodywork and construction firms

• Kickback stop - this shuts down the motor on the disc being

blocked

SPECIFICATIONS

Max. disc diameter 125 mm

No load speed 6000-10000 rpm

Power input 900 watt

Power output 500 watt

Tool fixture M 14

Weight 1,9 kg

Type Order no.

LE 9-10 125 350.672

LE 9-10 125 in case 378.313

Standard equipment

LE 9-10 125:

1 guard 125 Ø

1 handle

1 clamping flange

1 clamping nut M14

1 pin wrench

Standard equipment

LE 9-10 125 in carry case:

1 guard 125 Ø

1 handle

1 clamping flange

1 clamping nut M14

1 pin wrench

1 plastic carrying case with insert

Angle grinder

2100 watt angle grinder, 230 mm

• Highly efficient and resilient motor for more power output

• Electrical surge protection: for a soft start without power

overloading

• Optimized dust protection of the motor and the gearbox

• Switch: with lock-off / lock-on switch

• SoftVib handgrip for reduced vibration can be mounted in three

positions.

• Rear shaft handle with soft padding for secure grip

• Tool-free adjustment of safety guard

• Spindle lock

SPECIFICATIONS

Max. disc diameter 230 mm

No load speed 6500 rpm

Power input 2100 watt

Weight 5,8 kg

Type Order no.

L 3906 C 338.605

Standard equipment:

1 SoftVib handle

1 pin wrench

1 guard 230 Ø

1 clamping flange

1 clamping nut M14

19


www.flex-tools.com

FLEX. The original.

Since 90 years, Stuttgart-based FLEX has been known as a manufacturer of highquality

power tools. This is one of the secrets of our success: We are closely aligned

with the requirements of craftsmen. This results in products that are famous for their

long service life, performance and high functionality in many industries.

For more, see www.flex-tools.com

Your specialist retailer

This means performance: the high-speed

angle grinder - a FLEX invention

For more information on our new

cordless drill driver and rotary hammer

drills refer to your competent

specialist!

For exact directions, contact us per

phone +49 (0) 7144 828-0 or

by email: info@flex-tools.com

FLEX-Elektrowerkzeuge GmbH, Bahnhofstraße 15, 71711 Steinheim, Germany, Phone + 49 (0) 7144 828-0, Fax + 49 (0) 7144 25899, www.flex-tools.com

02-2012 / The fittings of the machines correspond to the usual standard equipment. Technical specifications

are subject to change without prior notice. FLEX accepts no responsibility for mistakes and printing errors.

More magazines by this user
Similar magazines