serving trolleys - GoHospitality

TROLLEYS
by TOURNUS

SERVING TROLLEYS
clearing
trolleys
- 2,3,4 trays
- 800 x 530 mm
- 1000 x 600 mm
- 1 or 2 arched
handles
- with or without
gallery
clearing trolley with 1
arched handle
plate trolleys
- 200, 270 or 400
plates
- with secure
stacking partitions
- with separation
grills + removable
front grill
plate trolley for 200 plates with separation
grills and removable front grill
clearing trolley
with gallery
plate trolley for 200 plates with
secure stacking partitions
Garnished
plate stackers
- 30, 60, 80 and 120
plates
- 40, 60 plates
with a top tray
- free standing or
wall mounted plate
stacker
4 stacks: 40 plates +
a top tray
cafeteria trolley
4 stacks: 80 plates
dishwasher rack dolleys
with removable abs tray
stainless steel dishwasher
rack dolleys
cafeteria
trolleys
- 12 or 18 trays,
stacked lengthways
- 12 or 24 trays
stacked lengthways
- 24 trays stacked
widthways.
- trolleys with or
without panels
Dishwasher - tray : 515 x 515
GN mobil
rack dolleys or 725 x 525 mm
- with or without
handle
- with fixed stainless
pan unit - capacity : 2 GN 1/1
containers or
1 GN 2/1 container
steel or with
removable abs tray
- depth : 200 mm

SLIDE BAR TROLLEYS
GN 1/1 trolley with 6
levels
GN 2/1 trolley
with 20 levels
GN 1/1 trolley
with 15 levels
stackable slide bar trolleys
GN 2/1 trolley
with 8 levels
euronorm trolley
400 mm opening
euronorm trolley
400 mm opening
pastry trolley 600 mm opening
pastry trolley
400 mm opening
preparation trolley
breakfast trolley
Preparation
trolleys
- 7 levels GN 2/1
- polyethylene sheet
- support for 6
poly. GN 1/6
- 1 lateral box for
knives
- 1 bar for accessories
Euronorm
trolleys
- 400 mm opening
9, 12, 20 levels
- square tubes
25 x 25 mm
Pastry
trolleys
- 400 or 600 mm
opening
- 16 levels
- square tubes
25 x 25 mm
Gastronorm
slide bar
trolleys
GN 1/1 or GN 2/1
- small with 6 or 8
levels
- large with 17 or 20
levels
- stackable with 20
levels
Breakfast
trolleys
-- with a top tray
and gallery
- 2 x 7 levels GN 1/1
325 mm opening
- with handle

OTHER TROLLEYS
Constant level - 1 or 2 stacks of
plate dispenser plates
trolleys - heated or neutral,
trolleys with openings,
universal
- glass or tray dispensers
constant level tray trolley
GN pans
carrier
- small model : 38
positions per level
- large model : 51
positions per level
neutral plate dispenser
universal trolley
Bain-marie
heated trolleys - with shelf
- with neutral or
heated bath
- thermostatically
controlled
Mobile
containers
- 140 litres stainless
steel containers
- 300 litres polyethylen
containers
- 500 litres polyethylen
containers
GN pans carrier
platform trolleys
Bread trolley
- width 350 mm
- with sliding
supports and 2 poly.
GN 2/1 pans depth
200 mm provided
bread trolley
multi-purpose trolley
clearing trolley
Platform
trolleys
- 1000 x 600 mm
- 4 wheels : 2 fixed,
2 swivels
Ø 160 mm with
galvanized steel
cover
accessories holder trolley
Accessories
holder trolley
- 1 removable
GN 1/1 pan
depth 40 mm
- 3 bars for ustensils
- 1 bar with hooks
Multi-purpose
trolley - with 2 trays
1000 x 600 mm
- load : 100 kg/tray
- horizontal handle
Vacuum
packed food
trolley
- 50 litre waste bag
folding holder
- poly. sheet and
perforated sheet
Clearing
trolley
- delivered with 3
stainless steel GN
1/3 cutlery pans
- depth 100 mm

With it’s range of trolleys, Tournus covers all applications from the kitchen to the table, with the same high standards of
ergonomics safety and hygiene.
Only one quality of material : manufactured entirely in 18-10 stainless steel. 100 % welded.
More than 100 standard models (see price list) without taking into account the various wheel options.
CLEARING TROLLEYS
- Pressed steel trays. 40 mm deep fitted with a sound deadening pad and rounded
edges to prevent injury.
- Entirely welded construction assuring highest rigidity (max load 150 kg).
- The 530 or 600 mm trays allow the GN 1/1 pans to fit perfectly.
- Options : with single handle and gallery, delivered flat packed (screwed trays).
PLATE
TROLLEYS
- Sturdy : fully welded construction in 18-10 stainless steel.
- Ergonomics: the sloped base means that crockery can be transported in perfect
safety.
- Fitted with either safety grids to stop plates falling, or 2 secure stacking partitions
and a front grid that is easy to remove and hooks onto the rear of the trolley.
DISHWASHER RACK
DOLLEYS
- Stainless steel or with a removable ABS base.
- with or without handle.
CONSTANT LEVEL PLATE DISPENSER TROLLEYS
- A complete range for all types of use: heated trolleys, neutral trolleys, with openings
for storing plates in a cold room, universal trolleys for all types of crockery (bowls
saucers, oval or rectangular plates).
- Easily adjustable for all plate diameters.
- Removable plate dispensers on all trolleys.
- The trolleys are rounded inside between the base and the sides, and have drainage
holes in the bottom. They are very easy to clean.
- Heated models are insulated with rockwool providing rapid and even heating.
CAFETERIA
TROLLEYS
- A large range : 7 standard models of trolleys with or without side panels. Insertion
lengthways 320 to 370 mm. Insertion widthways 400 to 480 mm or 480 to 560 mm.
- Sturdy : fully welded construction 18.10 stainless steel. 25 x 25 mm square tubes
and a 4,8 mm diameter stainless steel wires.
- The H-shaped design means trolleys are semi-stackable, thus saving space during
transport and storage.Trolleys with side panels: the laminated panels are fixed with
clips for easy removal.

h
PLATE STACKING TROLLEYS
- Excellent plate stability on 4 points with non-slip coatings. Our patented design holds
the plates top and bottom.
- Easily adjustable to different plate diameters. They also allow for plates of different
diameters to be stacked on the same trolley.
- Easy assembly and disassembly.
MOBILE
CONTAINERS
- 140 litre stainless steel containers , with strainer and overflow.
- 140 litre elevated stainless steel containers, with strainer and lever operated draining plug.
SLIDE BAR TROLLEYS
- Sturdy: fully welded construction. 18.10 stainless steel. 25 x 25 mm square tubes.
- Slide bars with rounded edges to prevent injury, fully welded with bump stops at the
end.
- A broad range for all uses: trolleys for GN 1/1 and 2/1, trolleys for
euronorm 600 x 400 mm.
- Also GN stackable trolleys.
OUR
GUARANTEE
FOR
THE
SATISF
TISFACTION
OF
PROFESSIONALS
Tournus Equipement SAS is a firm with a workforce of 200 employees, situated in the town of Tournus in Burgundy, on the Paris-
Lyon motorway with 17.000 SQ. M. of covered floor space.
Tournus Equipement is at the fore front of european manufacturers of stainless steel catering equipment, and is wellknown for the
quality of its industrial tools and fabrication.
48h
available within
48
Most of our products are ex-stock available within 48 hours
ISO 9001 certification (seal of approval)
provides additional proof of our ability to meet
the requirements of kitchen professionals.
HYGIÈNE ALIMENTAIRE
A large number of products have the
N-F hygiène alimentaire seal label.
They are marked with this logo.
TOURNUS EQUIPEMENT
25 avenue Jean Moulin - BP 59 - 71700 TOURNUS - FRANCE
Tel : + 33 3 85 27 42 65 - Fax : + 33 3 85 27 42 60
E-mail : export@tournus.com - Site web : www.tournus.com