Weinig Tools
Weinig Tools
Weinig Tools
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
PowerLock<br />
Profile depth, projection, max. cutting circle:<br />
The following table for a profile cutterhead with diameter<br />
90 mm illustrates the relationship between profile<br />
cutterhead, fitted cutter height, resultant profile depth<br />
and maximum permissible cutting circle diameter.<br />
Cutter height<br />
[mm]<br />
Max. permissible<br />
cutting circle dia.<br />
[mm]<br />
2.2.9 Grinding<br />
The blanks are profiled in accordance with a profile<br />
template and ground in the profile cutterhead on a<br />
<strong>Weinig</strong> grinder for profiled cutters.<br />
2.2.10 Technical data<br />
– Tool body of high-strength steel<br />
– Optionally fitted with 2 or 4:<br />
HSS (5/8 mm blank)<br />
Stellite / carbide (6/10 mm blank)<br />
– Blank weight max. 50 g per 10 mm blank length<br />
– Positive clamping of the profiled cutters with serrated<br />
back, serration 1/16" x 60°<br />
– Hardened clamping elements with ground clamping<br />
area<br />
– Cutting angle: 12° or 20°<br />
– Diameter of tool body: 90 mm<br />
– Max. speed n = 12,000 rpm<br />
up to tool length 240 mm<br />
– Max. speed n = 8,000 rpm<br />
for tool length over 240 mm<br />
(see legend on tool)<br />
Subject to change without notice!<br />
Max. possible<br />
profile depth<br />
[mm]<br />
50 130 approx. 11<br />
60 150 approx. 20<br />
70 170 approx. 35<br />
Tech. Dok. / WNW 850 02 / 02.2005.A / © MICHAEL WEINIG AG <strong>Weinig</strong> <strong>Tools</strong> 2-9
Change language