FAX-8360P - Brother International

FAX-8360P
FAX-8360P
Technical Specification
General
Engine
Laser
Modem Speed (bps) 33,600
Transmission Speed
Up to 2 seconds (Brother #1 Chart, JBIG)
ITU-T group compatibility Super G3
Data Compression
MH / MR / MMR / JBIG
CPU Speed
RISC-100MHz
Input / Output Width
Up to 216 mm
ADF (Automatic Document Feeder) Up to 30 sheets
Paper Capacity Up to 250 sheets (Increase to 500 sheets by adding up to 250
sheet optional tray)
Cassette control function
This enables the user to dedicate the lower tray to a particular
function, e.g. Incoming faxes only
Output Paper Capacity
Up to 150 sheets
LCD size
2 lines of 16 characters
On-Screen Programming
Step by step prompts are displayed within the LCD in order
to facilitate programming machine options and settings
Backup for clock
Up to 9 hours
Total Memory Capacity
8 MB (RAM)
(Increase up to 40MB using 16 or 32MB DIMM)
Memory Backup
Up to 4 days
Memory Security
Allows prevention of unauthorised access to the fax machine
Fax
Automatic Redial
Automatic redialling if the recipient fax is busy
One-Touch Dial Keys
32 locations
Speed Dials
200 speed dial locations
Group Dial
Up to 6 groups
Chain Dialling
Allows the user to store parts for long dialling sequences in
different one-touch or speed dial locations
Station ID
Name and number identification of the machine
Telephone Index
An easy to access electronic, alphabetical listing of stored
one-touch, speed dial and group numbers
Telstra ® Duet Compatibility A service purchased from Telstra ® that allows two or more
telephone numbers to share a single fixed line, the function
enables the machine to provide a different ring pattern
for each number
Speaker / Ring volume
3 volume levels or off
FAX/TEL Switch
Automatic recognition of fax and telephone reception
Super Fine
Enables quality transmission of very small print and line drawings
Grey Scale
64 levels
Contrast
Auto / light / dark
Enhanced Remote Activation Transfer a fax call answered at an extension phone to the fax
machine
Delayed Timer
Up to 50 choices
Polling Type
Standard and Secure
Quick-Scan
Reduce scanning times by scanning a fax into memory before
sending. Approx. 2 secs per page A4 standard
Memory Transmission
Up to 500 Pages (JBIG / Standard Resolution)*
Out of Paper Reception
Up to 500 pages (JBIG / Standard Resolution)*
Toner & Drum
Broadcasting
Send the same fax message to up to 282 separate locations,
including 50 manual locations
Batch Transmission Memory Stores documents for the same location in the machines
memory for transmission in a single call
Auto Reduction
When receiving a single page document between 297mm and
350mm long the fax machine will automatically reduce the
message to fit onto a single A4 sheet
ECM ( Error Correction Mode ) Where machines share the ECM feature, detects errors during
fax transmission and resends the page(s) of the document that
had an error
Dual Access
Allows the user to perform 2 different operations on the machine
at the same time
Fax Forwarding
Sends a fax received in memory to another pre-programmed
fax number
Remote Access
Allows the user to remotely access their machine by using
another touch tone phone
Fax Retrieval
Allows the user to retrieve fax messages using another touch
tone machine
Copy
Speed
Up to 14 copies per minute
Warm up time from ready/sleep mode It takes approximately 17 seconds for a first copy to be delivered
from ready mode and 25 seconds from sleep mode
Resolution
Maximum 600 x 300 dpi
Multi-Copying / Stack / Sort Makes up to 99 copies of each page loaded in the ADF and can
either stack or sort at the user’s choice
2 in 1 / 4 in 1 Allows the user to compress 2 or 4 pages into 1 single A4 page
Enlargement/Reduction Ratio Reduce or increase document sizes from 50% to 200% in 1%
increments
List / Report
Journal Report
Lists information about the last 200 incoming and outgoing
faxes
Transmission Verification Report Reports transmission details after each fax is sent
Cover-page
Generates a cover page at the recipients machine
Help List
By pressing the reports key a list of basic operational steps and
functions can be printed
System Set-up List
A printed report that shows the current setting of your machine
Interface
External TAD Interface
Interface for connecting external telephone answering devices
Weights and Measures
Dimensions
377mm width x 442mm depth x 323mm height
Weight
12 Kg (including drum unit and toner cartridge)
Power Consumption
Sleep: 10 W or less
Stand-by: 70 W or less
Peak: 940 W or less
Consumables
Toner Cartridges:
TN-6300 / TN-6600 (Up to 3,000/6,000 pages with 5% coverage)
Drum Unit:
DR-6000 (Up to 20,000 pages subject to environment)
* ITU-T Test Chart #1 with JBIG coding and standard resolution.
Contact:
Brother International Australia Pty Ltd
Web-site: www.brother.com.au Solutions web-site: solutions.brother.com
NSW/ACT 7 Khartoum Rd. North Ryde NSW 2113 Phone: (02) 9887 4344 Fax: (02) 9870 7234
VIC 43 Carrington Rd. Box Hill VIC 3128 Phone: (03) 9899 4844 Fax: (03) 9899 4833
QLD/NT Unit 4, 57 Miller St. Murrarie QLD 4172 Phone: (07) 3348 9266 Fax: (07) 3348 9366
SA/TAS Unit 4, 13 King William Rd. Unley SA 5061 Phone: (08) 8272 1300 Fax: (08) 8272 1199
WA 117 Great Eastern Highway Belmont WA 6104 Phone: (08) 9478 1955 Fax: (08) 9277 2177
All specifications are subject to change without notice
Failure to use genuine brother supplies may damage the machine and such damages will not be covered under warranty.