20.12.2013 Views

Couch bed (PDF) - Hüsler Nest

Couch bed (PDF) - Hüsler Nest

Couch bed (PDF) - Hüsler Nest

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Mounting instructions<br />

<strong>Couch</strong> Bed<br />

1<br />

Frame<br />

1a<br />

1d<br />

Assemble side parts (1a, 1b, 1c, 1d). The parts 1b,<br />

1d have a Hüsler <strong>Nest</strong> Logo. These must show to<br />

the inner side.<br />

1b<br />

1c<br />

Headboard<br />

Option<br />

Part (1a) with the holding holes need to be<br />

placed at the topside.<br />

2<br />

2c<br />

Carrying beams<br />

Put the locking bolts (2a) in the carrying beams.<br />

2d<br />

2d<br />

Slide the beams (2b and 2f) under the head and<br />

foot part (2c) of the frame. Lock it with the plastic<br />

bolts (2e).<br />

2b<br />

2f<br />

2f<br />

2b<br />

The screwing holes (2d) need to be on the outer<br />

side of the beam.<br />

In a double <strong>bed</strong> the holes of the inner beams (2f)<br />

need to be in the inner direction.<br />

2b 2a 2e<br />

3<br />

Installing the supports<br />

Put the wooden dowels (3a) into the pre-drilled<br />

holes.<br />

3a<br />

3b<br />

3b<br />

3c<br />

Put the support parts (3b) under the carrying<br />

beams. Use the 4 wooden crews to fixate them.<br />

(with coin or screw driver!).<br />

4<br />

Supports<br />

Option<br />

Assemble parts (4a) with (4b). Upper edge must<br />

be even with the upper edge of the support.<br />

Matching supports:<br />

• bench support<br />

4a<br />

• trapezium skids (from width of 120 cm)<br />

4b<br />

• straight skids<br />

Hüsler <strong>Nest</strong> AG Murmeliweg 6<br />

CH-4538 Oberbipp<br />

Fon +41 32 636 53 60<br />

Fax +41 32 636 53 61<br />

www.huesler-nest.ch<br />

info@huesler-nest.ch


Mounting instructions<br />

<strong>Couch</strong> Bed<br />

5<br />

Option<br />

5a<br />

Back and leg rest<br />

The two side parts (5a) need to be clued<br />

together with the top part (5b).<br />

White clue is included<br />

5b<br />

6<br />

Option<br />

6a<br />

Dismantling the back and leg rest<br />

For dismantling the back and leg rest (6a) you<br />

can push the bolt with a screw driver out of the<br />

hinge.<br />

7<br />

Option<br />

7a<br />

Fixing the headboard<br />

Screw the headboard (7a) with the four wooden<br />

screws on the <strong>bed</strong> frame (7b) (with coin or screw<br />

driver!).<br />

7b<br />

Mounting headboard<br />

Position of holes in the headpart<br />

Hüsler <strong>Nest</strong> AG Murmeliweg 6<br />

CH-4538 Oberbipp<br />

Fon +41 32 636 53 60<br />

Fax +41 32 636 53 61<br />

www.huesler-nest.ch<br />

info@huesler-nest.ch

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!