Hinges and Flap Fittings Furniture Hinges - Hafele
Hinges and Flap Fittings Furniture Hinges - Hafele
Hinges and Flap Fittings Furniture Hinges - Hafele
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Furniture</strong> <strong>Hinges</strong><br />
Piano hinge for screw fixing<br />
• Length: 3.5 m<br />
• Manufactured in compliance with DIN 7956<br />
Steel<br />
3<br />
Order reference<br />
Also available in fixed lengths.<br />
• Flange thickness: 0.7 mm (width open 40 mm: 0.8 mm)<br />
• Barrel Ø: 3.3 mm (width open 40 mm: 3.5 mm)<br />
• Version: Rolled<br />
Width open B Finish Cat. No.<br />
20 mm Brass plated 351.01.501<br />
Nickel plated 351.01.707<br />
25 mm Brass plated 351.01.510<br />
Nickel plated 351.01.716<br />
32 mm Brass plated 351.01.538<br />
Brass colour lacquered 351.00.531<br />
Nickel plated 351.01.734<br />
40 mm Brass plated 351.01.547<br />
Packing: 3.5 m<br />
Rustproof stainless steel, quality 4016<br />
• Flange thickness: 0.8 mm<br />
• Barrel Ø: 3.5 mm<br />
• Version: Rolled<br />
Width open B<br />
Cat. No.<br />
32 mm 351.04.039<br />
Packing: 3.5 m<br />
Hinge for wood thickness of 16 mm<br />
• Opening angle: 180°<br />
• Material: Plastic housing<br />
• Installation: Screw fixing<br />
Brass link<br />
Drilling dimensions<br />
Steel link<br />
Housing colour Link finish Cat. No.<br />
Steel link<br />
White Galvanized 341.04.700<br />
Brown Yellow chromatized 341.04.100<br />
Packing: 1 or 100 pcs.<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 3.26<br />
New products <strong>and</strong> systems: www.hafele.com
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Furniture</strong> <strong>Hinges</strong><br />
GS 22.5 <strong>and</strong> GS 45 Mitred hinges<br />
Adjustment possibility<br />
Height<br />
Depth<br />
Width<br />
Height<br />
• Material: Zinc alloy cup, steel link arm<br />
• Finish: Nickel plated<br />
• For door thickness: 16 – 22 mm<br />
• For side panel thickness: 16 – 22 mm, from 20 mm edge has to be<br />
chamfered by about 3 mm<br />
• Adjusting facility: Three-dimensional<br />
• Installation: Screw fixing<br />
Side panel<br />
Application example GS mitred<br />
hinge 45°<br />
Height adjustment 3 mm,<br />
width <strong>and</strong> depth adjustment 1.5 mm.<br />
3<br />
GS 22.5 Mitred hinge<br />
Mounting<br />
Side<br />
Side<br />
Drilling dimensions mitre angel 22.5°<br />
Door<br />
Door<br />
Door closed<br />
Door open<br />
Opening angle<br />
Cat. No.<br />
120° 325.00.726<br />
Packing: 4 or 20 pcs.<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
GS 45 Mitred hinge<br />
Drilling dimensions mitre angel 45°<br />
<strong>Flap</strong><br />
Carcase<br />
Mounting<br />
Door<br />
Side<br />
Side<br />
Door<br />
Door closed<br />
Door open<br />
Opening angle<br />
Cat. No.<br />
135° 325.00.708<br />
Packing: 4 or 20 pcs.<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 3.27
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Furniture</strong> <strong>Hinges</strong><br />
Pivot hinge<br />
• Opening angle: 140°<br />
• For door thickness: 12 – 21 mm<br />
• Opening angle restraint: Without stop<br />
• Installation: Press fitting<br />
Function<br />
Removing the door: Lift the spring-loaded pin with a small screwdriver.<br />
Condition: Drilled hole in door <strong>and</strong> slotted hole in sleeve are identical.<br />
Material Colour Cat. No.<br />
Plastic White 361.22.710<br />
Brown 361.22.110<br />
Black 361.22.310<br />
3<br />
Packing: 20 or 200 pcs.<br />
Application<br />
Side<br />
<strong>Flap</strong> closed<br />
Setting the door gap:<br />
Widen or reduce door gap by turning the flange.<br />
Fix adjusted door gap with a small chipboard screw.<br />
<strong>Flap</strong> open<br />
GLARIOR Glass door hinge, opening angle 95°<br />
• Area of application: For inset glass doors<br />
• Material: Zinc alloy<br />
• For glass thickness: 6 – 8 mm<br />
• Installation: Screw fixing to bottom <strong>and</strong> upper shelf,<br />
direct fixing to glass door<br />
• Version: Without catch<br />
• No drilling in glass necessary<br />
• Supplied with: Pressure plate<br />
Inset mounting<br />
Fixing to the glass door<br />
Protective foil<br />
Pressure plate<br />
Self-adhesive pad<br />
Pressure plate<br />
Glass door<br />
Rotating element<br />
Installation<br />
• Stick pressure plate on in<br />
required position<br />
• Press-fit rotating element<br />
• Adjust glass door<br />
• Tighten screws<br />
Finish<br />
Cat. No.<br />
Nickel plated matt 361.49.603<br />
Nickel plated polished 361.49.701<br />
Chrome plated polished 361.49.201<br />
Packing: 1, 10 or 100 pcs.<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 3.28<br />
New products <strong>and</strong> systems: www.hafele.com
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Furniture</strong> <strong>Hinges</strong><br />
Glass door hinge, opening angle 180°, with exposed axle<br />
• Material: Brass<br />
• For glass thickness: 6 – 8 mm<br />
• Installation: Screw fixing<br />
• Without catch<br />
• With glass aperture<br />
Inset mounting<br />
Finish<br />
Cat. No.<br />
Matt 361.85.501<br />
Nickel plated matt 361.85.609<br />
Packing: 1 or 20 pcs.<br />
3<br />
Installation<br />
SIMPLEX Glass door hinge, opening angle 110°<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
Inset mounting<br />
Installation<br />
• Area of application: For inset glass doors<br />
• Finish: Bushing black<br />
• For door height: Max. 600 mm<br />
• For door width: Max. 400 mm<br />
• For glass thickness: Max. 4.7 mm<br />
• Version: With plastic bushing<br />
• Installation: Plug fitting into base <strong>and</strong> direct fixing to glass<br />
door with screw<br />
• Without catch, no drilling in glass necessary<br />
Material Finish Cat. No.<br />
Steel Chrome plated polished 361.42.202<br />
Black matt 361.42.300<br />
Packing: 1 or 50 pairs<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 3.29
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> <strong>Fittings</strong><br />
Swing-up table, load bearing capacity 5 kg<br />
3<br />
The gas spring supports the slight lifting of the tabletop<br />
The integrated damping provides smooth <strong>and</strong> silent close<br />
Drilling pattern<br />
• Application: For high <strong>and</strong> forward tilting of tabletops <strong>and</strong> shelves,<br />
such as coffee tables<br />
• Construction: Partial protection terminal with locking lever pivoted<br />
into position<br />
• Material: Steel<br />
• Finish: White RAL 9006<br />
• Installation: Screw fixing into predrilled holes with 32 mm grid<br />
• Capacity: 5 kg<br />
Table top<br />
Drilling dimension<br />
Supplied with<br />
1 Pair of swiveling fitting<br />
1 Crossbar<br />
1 Installation guide<br />
Description For width mm Cat. No.<br />
Top high swivel fitting 698 643.12.200<br />
Packing: 1 pc.<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 3.30<br />
New products <strong>and</strong> systems: www.hafele.com
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> <strong>Fittings</strong><br />
DORANA-STOP <strong>Flap</strong> stay with with braking mechanism<br />
adjustable braking effect<br />
• Material: Steel, plastic housing<br />
• Finish: Nickel plated, housing white<br />
• Version: 1-arm, with clamping pedestal <strong>and</strong> screw-on bracket<br />
• Installation: Screw fixing<br />
Braking effect<br />
Adjusting the braking effect with the screw.<br />
• Unscrew to increase braking effect<br />
• Tighten screw to decrease braking effect<br />
3<br />
Installation<br />
Vertical mounting<br />
Horizontal mounting<br />
Side panel<br />
Side panel<br />
<strong>Flap</strong> open<br />
Dimension C<br />
Determine dimension C by<br />
trial mounting.<br />
<strong>Flap</strong> open<br />
Dimension C<br />
Determine dimension C by<br />
trial mounting.<br />
Base<br />
<strong>Flap</strong><br />
Base<br />
<strong>Flap</strong><br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
Length L Internal carcase height Dimension A<br />
160 mm 250 – 350 mm 127 mm<br />
190 mm 300 – 400 mm 151 mm<br />
220 mm 350 – 450 mm 175 mm<br />
Length L Internal carcase height Dimension A<br />
160 mm 250 – 350 mm 82 mm<br />
190 mm 300 – 400 mm 105 mm<br />
220 mm 350 – 450 mm 127 mm<br />
Mounting Length L Cat. No.<br />
Left 160 mm 365.86.713<br />
190 mm 365.86.731<br />
220 mm 365.86.759<br />
Right 160 mm 365.86.704<br />
190 mm 365.86.722<br />
220 mm 365.86.740<br />
Packing: 20 pcs.<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 3.31
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> stay with with braking mechanism<br />
adjustable braking effect<br />
• Opening angle: 90°<br />
• Material: Steel<br />
• Finish: Nickel plated<br />
• Version: 1-arm, with joint<br />
• Installation: Screw fixing, plug in fixing to angular bracket<br />
(quick fixing system)<br />
Braking effect<br />
Adjusting the braking effect with the screw<br />
• Unscrew to increase braking effect<br />
• Tighten screw to decrease braking effect<br />
3<br />
For wooden flaps<br />
• Version: With angular bracket<br />
Mounting<br />
Cat. No.<br />
Left 365.30.611<br />
Right 365.30.610<br />
Packing: 1 or 10 pcs.<br />
Supplied with<br />
Fixing screws <strong>and</strong> installation instructions<br />
Installation<br />
<strong>Flap</strong><br />
Base<br />
Door buffer, self adhesive<br />
Door buffers moulded in blocks<br />
• Material: Plastic (polyurethane)<br />
• Shore hardness: A 60-70<br />
• Installation: Self adhesive (permanently self adhesive by<br />
non-aging acrylate adhesive)<br />
• Form of delivery: Moulded in blocks<br />
• UV resistant, no yellowing, wear-free<br />
Colour<br />
Cat. No.<br />
Transparent 356.21.420<br />
Packing: 50, 1,000 or 5,000 pcs. (50 pcs./block)<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 3.32<br />
New products <strong>and</strong> systems: www.hafele.com
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> <strong>Fittings</strong><br />
MINIFIX <strong>Flap</strong> hinge<br />
opening angle 90°<br />
Application<br />
• The flap hinges are mounted with the MINIFIX 15 connector housing<br />
• Quick <strong>and</strong> easy mounting through drilling from the front<br />
• High stability as the connecting bolt <strong>and</strong> the hinge were made in one casting<br />
3<br />
<strong>Flap</strong> made of wood<br />
Application example with FALL-EX flap stay with braking mechanism<br />
For wooden flaps<br />
• Material: Zinc alloy<br />
• Finish: Nickel plated<br />
Installation<br />
Cat. No.<br />
Press fitting 342.77.700<br />
Packing: 100 pcs.<br />
Detail view: <strong>Flap</strong> made of wood<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
Drilling dimensions<br />
Installation<br />
• Push flap hinge into drilled hole of flap<br />
• Fixing through inner side of cup with countersunk chipboard<br />
screw Ø 3.5 x 20 mm<br />
Application <strong>and</strong> planning dimensions<br />
Carcase<br />
<strong>Flap</strong> hinge<br />
<strong>Flap</strong><br />
Chipboard screw<br />
<strong>Flap</strong> open<br />
<strong>Flap</strong> closed<br />
Minifix 15 Connector housing<br />
Order reference<br />
Please order MINIFIX 15 connector housing <strong>and</strong> chipboard screw<br />
separately.<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 3.33
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> <strong>Fittings</strong><br />
For aluminium frames<br />
Application <strong>and</strong> planning dimensions<br />
Aluminium frame<br />
Carcase<br />
<strong>Flap</strong> hinge<br />
Detail view:<br />
<strong>Flap</strong> with aluminium frame<br />
Minifix 15 Connector<br />
housing<br />
3<br />
Drilling dimensions<br />
<strong>Flap</strong> closed<br />
<strong>Flap</strong> open<br />
Installation<br />
• Plug flap hinge in aluminium frame<br />
• Fixing from beneath with two countersunk chipboard<br />
screws Ø 3.5 x 13 mm<br />
Installation<br />
Cat. No.<br />
Plug in 342.77.710<br />
Packing: 100 pcs.<br />
Order reference<br />
Please order MINIFIX 15 connector housing <strong>and</strong><br />
chipboard screws separately.<br />
Connector housing without rim<br />
Dimension A<br />
Drilling depth<br />
• Material: Zinc alloy<br />
• Drive: PZ2, PZ3 cross slot, flat blade or SW4 hexagon<br />
• Area of application: For wood thicknesses of 19 mm<br />
Dimension A Drilling depth Bright Nickel plated<br />
9.5 mm 14.0 +0.5 mm 262.26.075 262.26.575<br />
Packing: 100 or 1000 pcs.<br />
Detail view: Closed flap made of wood, viewed from beneath<br />
Detail view: Closed flap with aluminium frame, viewed from beneath<br />
Drilling dimensions<br />
x = panel thickness -8 mm<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 3.34<br />
New products <strong>and</strong> systems: www.hafele.com
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> <strong>Fittings</strong><br />
PLANO-MEDIAL <strong>Flap</strong> hinge<br />
opening angle 90°<br />
Zinc alloy<br />
Application <strong>and</strong> planning dimensions for base thickness<br />
Drilling dimensions<br />
Finish<br />
Cat. No.<br />
Nickel plated 342.75.628<br />
Gold coloured 342.75.824<br />
Burnished 342.75.128<br />
Packing: 10 or 50 pcs.<br />
3<br />
Drilling dimensions in base<br />
Drilling dimensions inside the flap<br />
Zinc alloy<br />
Adjustment facilities<br />
Drilling dimensions<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
Drilling dimensions in base <strong>and</strong> in flap<br />
Application <strong>and</strong> planning dimensions<br />
Base<br />
<strong>Flap</strong> open<br />
b = flap thickness<br />
c = gap<br />
<strong>Flap</strong> closed<br />
<strong>Flap</strong><br />
a = side <strong>and</strong> depth adjustment<br />
b = height adjustment: +2, -1 mm<br />
Finish<br />
Cat. No.<br />
Nickel plated 342.66.730<br />
Packing: 10 or 50 pcs.<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 3.35
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> <strong>Fittings</strong><br />
Mounting Description Model <strong>Flap</strong> height <strong>Flap</strong> weight Page<br />
Double flap lift up<br />
fitting<br />
• <strong>Flap</strong> is held reliably in any position Senso 3674 up to 900 mm up to 24.5 kg 3.37<br />
• For two-piece flaps E-Senso 3686 (electric) up to 900 mm up to 22.0 kg 3.38<br />
• Gentle closing<br />
• With hinge connection<br />
• Auto-stop<br />
• Easy installation<br />
• Low installation depth<br />
(Senso <strong>and</strong> E-Senso)<br />
3<br />
Stay flap fitting<br />
• <strong>Flap</strong> is held reliably in any position Free 3677 up to 700 mm up to 17.0 kg 3.42<br />
• Without hinge connection<br />
• Soft close possible<br />
• Easy installation<br />
Swing up front<br />
fitting<br />
• <strong>Flap</strong> is held reliably in any position Maxi swing soft 3676 up to 800 mm up to 14.0 kg 3.43<br />
• For one-piece flaps Verso 3684 up to 800 mm up to 17.0 kg 3.45<br />
• <strong>Flap</strong> swings up above the cabinet top E-Verso 3687 (electric) up to 800 mm up to 18.0 kg 3.46<br />
• Gentle closing<br />
• Without hinge connection<br />
• Easy installation<br />
• Low installation depth (Verso <strong>and</strong> E-Verso)<br />
• Parallel upwards action Strato 3685 up to 650 mm up to 16.0 kg 3.49<br />
• Gentle closing E-Strato 3688 (electric) up to 650 mm up to 14.0 kg 3.50<br />
• Without hinge connection<br />
• Easy installation<br />
• Low installation depth<br />
Parallel lift up front<br />
fitting<br />
Lid stays<br />
<strong>Flap</strong> stays<br />
• Holds the flap reliably in any position Duo 3667 up to 500 mm up to 15.0 kg 3.61<br />
• With hinge connection Duo forte 3666 up to 700 mm up to 15.0 kg 3.61<br />
• Easy installation Maxi 3675 overview 3.53<br />
Maxi 3675 up to 1000 mm up to 13.6 kg 3.53<br />
Maxi Touch opening 3675 up to 1000 mm up to 27.3 kg 3.56<br />
Lid stays Maxi 3675 up to 1000 mm up to 15.0 kg 3.60<br />
• <strong>Flap</strong> function in combination with flap Duo 3667 up to 500 mm up to 15.0 kg 3.61<br />
hinges Duo forte 3666 up to 700 mm up to 15.0 kg 3.61<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 3.36<br />
New products <strong>and</strong> systems: www.hafele.com
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> <strong>Fittings</strong><br />
Senso 3674 Complete set<br />
for two-piece flaps made of wood or with aluminium frame<br />
• Material: Fitting: Steel, aluminium, Cover cap: Plastic<br />
• Finish: Fitting: Silver coloured anodized, Cover cap: Grey, similar to<br />
RAL 9006<br />
• Screw-on brackets for wood supplied<br />
3<br />
<strong>Flap</strong> made of wood<br />
Adjustment facility<br />
Height adjustment Side adjustment<br />
±3 mm ±3 mm<br />
Holding power Opening angle Centre pull<br />
adjustment adjustment adjustment<br />
Installation<br />
Installation dimensions<br />
<strong>Flap</strong> ∂ D H R T U V W<br />
height<br />
mm<br />
550 101° 57.5 290 63.5 70 139 192 390<br />
600 101° 73.5 326 79.5 70 130 170 405<br />
650 103° 67.5 340 73.5 95 160 220 425<br />
720 102° 75.5 378 81.5 96 207 261 456<br />
800 100° 71.5 392 77.5 85 255 260 500<br />
865 102° 47.5 400 53.5 120 260 315 525<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 3.37
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> <strong>Fittings</strong><br />
Supplied with<br />
1 Double flap lift up fitting<br />
2 Screw-on brackets for wooden flaps or flaps with aluminium frame, from frame width 45 mm<br />
1 Set of installation instructions<br />
3<br />
<strong>Flap</strong> height<br />
<strong>Flap</strong> weight<br />
Cat. No.<br />
mm<br />
kg<br />
550 (540 – 580) 3.0 – 6.5 372.64.601<br />
6.0 – 12.0 372.64.602<br />
9.0 – 18.0 372.64.603<br />
12.0 – 24.5 372.64.604<br />
600 (580 – 640) 3.0 – 6.0 372.64.611<br />
6.0 – 11.0 372.64.612<br />
9.0 – 17.0 372.64.613<br />
12.0 – 23.0 372.64.614<br />
650 (640 – 700) 3.0 – 5.5 372.64.621<br />
5.5 – 10.0 372.64.622<br />
8.0 – 16.0 372.64.623<br />
10.5 – 21.5 372.64.624<br />
720 (700 – 780) 3.5 – 5.5 372.64.631<br />
5.0 – 9.0 372.64.632<br />
7.0 – 15.0 372.64.633<br />
9.0 – 20.0 372.64.634<br />
800 (780 – 840) 5.0 – 9.0 372.64.642<br />
7.0 – 13.0 372.64.643<br />
9.0 – 17.0 372.64.644<br />
865 (840 – 900) 5.5 – 12.0 372.64.653<br />
7.5 – 16.0 372.64.654<br />
Packing: 1 set<br />
Order reference<br />
Screw-on brackets, adapters for 20 mm aluminium profiles <strong>and</strong> connecting hinge are not supplied. Please order separately. Special models with<br />
2/3 <strong>and</strong> 1/3 flap heights possible on request.<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 3.38<br />
New products <strong>and</strong> systems: www.hafele.com
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> <strong>Fittings</strong><br />
E-Senso 3686 (electric) Complete set<br />
for two-piece flaps made of wood or with aluminium frame<br />
• Material: Fitting: Steel, aluminium, Cover cap: Plastic<br />
• Finish: Fitting: Silver coloured anodized, Cover cap: Grey, similar to<br />
RAL 9006<br />
• Nominal voltage: 18 V<br />
• Input voltage: 100 – 240 V, 50 – 60Hz<br />
• Electric opening <strong>and</strong> closing system for flaps<br />
• Programmable push-button sender for opening <strong>and</strong><br />
closing the flap<br />
• Push-button sender suitable for operating several<br />
flap fittings<br />
• Quiet drive <strong>and</strong> soft closing action<br />
• Operating the flap in case of power failure possible<br />
with increased amount of effort<br />
• <strong>Flap</strong> can be operated without additional power<br />
assistance<br />
• Obstacle detection with auto-stop on both sides<br />
3<br />
Push-button sender for recess installation in 35 mm cup drilling<br />
The push-button sender can be recess mounted in the furniture.<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
Adjustment facility<br />
Height adjustment Side adjustment<br />
±3 mm ±3 mm<br />
Holding power Opening angle Centre pull<br />
adjustment adjustment adjustment<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 3.39
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> <strong>Fittings</strong><br />
E-Senso 3686 (electric) Complete set<br />
for two-piece flaps made of wood or with aluminium frame<br />
Installation<br />
Installation dimensions<br />
<strong>Flap</strong> ∂ D H R T U V W<br />
height<br />
mm<br />
540 – 580 101° 57.5 290 63.5 70 139 192 390<br />
580 – 640 101° 73.5 326 79.5 70 130 170 405<br />
640 – 700 103° 67.5 340 73.5 95 160 220 425<br />
700 – 780 102° 75.5 378 81.5 96 207 261 456<br />
780 – 840 100° 71.5 392 77.5 85 255 260 500<br />
840 – 900 102° 47.5 400 53.5 120 260 315 525<br />
3<br />
Supplied with<br />
1 Push-putton sender with battery<br />
1 Connecting cable (length 2000 mm) with angled Euro plug/<br />
male adapter<br />
1 Control unit with female adapter<br />
1 Allen key 4 mm<br />
2 <strong>Fittings</strong> with cover caps<br />
2 Base plates<br />
2 Screw-on brackets for wooden doors <strong>and</strong> wide aluminium frames<br />
2 Connecting cables for drives/control unit<br />
4 Screws M5 x 16 mm<br />
1 Set of installation <strong>and</strong> operating instructions<br />
<strong>Flap</strong> height<br />
<strong>Flap</strong> weight<br />
Cat. No.<br />
mm<br />
kg<br />
555 (540 – 580) 2.5 – 6.5 372.64.801<br />
6.0 – 11.0 372.64.802<br />
9.5 – 18.0 372.64.803<br />
13.0 – 22.0 372.64.804<br />
600 (580 – 640) 2.5 – 6.0 372.64.811<br />
5.5 – 10.0 372.64.812<br />
7.5 – 17.0 372.64.813<br />
12.0 – 21.0 372.64.814<br />
650 (640 – 700) 3.0 – 5.5 372.64.821<br />
5.5 – 9.0 372.64.822<br />
7.0 – 14.5 372.64.823<br />
10.5 – 18.5 372.64.824<br />
720 (700 – 780) 3.0 – 5.0 372.64.831<br />
4.5 – 8.0 372.64.832<br />
7.0 – 14.0 372.64.833<br />
9.0 – 16.5 372.64.834<br />
800 (780 – 840) 4.5 – 8.0 372.64.841<br />
7.0 – 11.0 372.64.842<br />
9.0 – 14.0 372.64.843<br />
865 (840 – 900) 5.0 – 10.0 372.64.851<br />
7.0 – 12.0 372.64.852<br />
Packing: 1 set<br />
Order reference<br />
Screw-on brackets, adapters for aluminium profiles <strong>and</strong> connecting<br />
hinges are not supplied. Please order separately.<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 3.40<br />
New products <strong>and</strong> systems: www.hafele.com
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> <strong>Fittings</strong><br />
––> Senso 3674 <strong>and</strong> E-Senso 3686 accessories<br />
Screw-on bracket with round hole<br />
For wooden flaps or flaps with aluminium frame, from frame width 45 mm<br />
• Area of application: For mounting the double flap lift up fitting<br />
• Material: Plastic<br />
Finish<br />
Cat. No.<br />
Silver coloured, similar to RAL 9006 372.64.990<br />
Packing: 1 or 10 pieces<br />
Screw-on bracket with slot<br />
For flaps with aluminium frame, frame width 20 mm<br />
• Area of application: For mounting the double flap lift up fitting<br />
• Material: Plastic<br />
3<br />
Colour<br />
Cat. No.<br />
Grey, similar to RAL 9006 372.64.991<br />
Packing: 1 or 10 pieces<br />
Order reference<br />
Please order separately for aluminium frame Cat. No. 372.64.995.<br />
Adapter for aluminium profile<br />
For screw fixing to screw-on bracket Cat. No. 372.64.991<br />
• Area of application: For right <strong>and</strong> left h<strong>and</strong> use<br />
• Material: Zinc alloy<br />
Drilling pattern<br />
Finish<br />
Cat. No.<br />
Nickel plated 372.64.995<br />
Packing: 1 or 10 pieces<br />
Order reference<br />
Please order screw-on bracket Cat. No. 372.64.991 separately.<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
Connecting hinge<br />
• Area of application: For wooden flaps <strong>and</strong> flaps with aluminium<br />
frame, from frame width 20 mm<br />
• Material: Zinc alloy<br />
• Finish: Nickel plated<br />
Version Function Installation Cat. No.<br />
With Not With<br />
372.64.795<br />
guide pin adjustable Varianta special screw<br />
With<br />
chipboard screws<br />
372.64.790<br />
Without<br />
guide pin<br />
Without<br />
guide pin<br />
Not<br />
adjustable<br />
Packing: 1 or 10 pieces<br />
Adjustable<br />
Adjustable<br />
With<br />
Varianta special screw<br />
With<br />
chipboard screws<br />
With<br />
Varianta special screw<br />
With<br />
chipboard screws<br />
372.64.792<br />
372.64.793<br />
372.64.794<br />
372.64.791<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 3.41
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> <strong>Fittings</strong><br />
Free 3677 Complete set<br />
for one-piece flaps made of wood or with aluminium frame<br />
• Area of application: For wooden flaps <strong>and</strong> flaps with aluminium<br />
frame<br />
• Opening angle: 90° or 100°<br />
• Material: Fitting: Steel, Cover cap: Plastic<br />
• Finish: Fitting: Nickel plated, Cover cap: Grey, RAL 9006<br />
• Installation: Fitting for screw fixing, flap without tools (clip system)<br />
onto pre-mounted mounting bracket<br />
• <strong>Hinges</strong> not required<br />
• <strong>Flap</strong> locks in any position<br />
3<br />
Adjustment facility<br />
• With soft close<br />
Height Side Tilt Holding power<br />
adjustment adjustment adjustment adjustment<br />
+1/-1.5 mm +1/-1.5 mm<br />
Installation<br />
Sample measurements table for max. flap weight<br />
Model A B C D E F<br />
<strong>Flap</strong><br />
height<br />
mm<br />
<strong>Flap</strong> weight<br />
kg<br />
250 2.4 –<br />
4.0<br />
400 1.5 –<br />
2.5<br />
4.6 –<br />
8.2<br />
3.0 –<br />
5.0<br />
500 2.3 –<br />
4.1<br />
7.0 –<br />
12.0<br />
4.4 –<br />
7.6<br />
3.5 –<br />
6.1<br />
9.4 –<br />
16.4<br />
5.9 –<br />
10.2<br />
4.7 –<br />
8.2<br />
600 3.9 –<br />
6.8<br />
700 3.3 –<br />
5.8<br />
––> Free 3677 Accessories<br />
Adapter for 20 mm aluminium profile<br />
8.7 –<br />
14.1<br />
7.0 –<br />
11.3<br />
5.8 –<br />
9.4<br />
5.0 –<br />
8.1<br />
10.4 –<br />
17.0<br />
8.6 –<br />
14.0<br />
7.4 –<br />
12.1<br />
Supplied with<br />
2 Stay flap fittings (left/right)<br />
2 Cover caps for fitting<br />
2 Mounting brackets (left/right)<br />
2 Cover caps for mounting brackets<br />
Installation instructions<br />
Model<br />
Opening angle<br />
90° 100°<br />
A 372.91.521 372.91.511<br />
B 372.91.522 372.91.512<br />
C 372.91.523 372.91.513<br />
D 372.91.524 372.91.514<br />
E 372.91.525 372.91.515<br />
F 372.91.526 372.91.516<br />
Packing: 1 set<br />
• Material: Zinc alloy<br />
• Mounting: Suitable for left h<strong>and</strong> <strong>and</strong> right h<strong>and</strong> use<br />
Finish<br />
Side panel thickness Cat. No.<br />
mm<br />
Chrome plated 16 372.91.591<br />
19 372.91.592<br />
Packing: 2 pieces<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 3.42<br />
New products <strong>and</strong> systems: www.hafele.com
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> <strong>Fittings</strong><br />
Maxi Swing Soft 3676 Complete set<br />
for one-piece flaps made of wood or with aluminium frame<br />
• Area of application: For wooden flaps or flaps with aluminium frame<br />
• Material: Fitting: Zinc alloy, steel, Cover cap: Plastic<br />
• Finish: Fitting: Nickel plated, Cover cap: Grey, RAL 9006<br />
• Installation: Fitting for screw fixing, flap without tools (clip system)<br />
onto pre-mounted mounting bracket<br />
• <strong>Hinges</strong> <strong>and</strong> cross bar not required<br />
• <strong>Flap</strong> locks in any position<br />
• With soft close<br />
3<br />
Adjustment facility<br />
Height Side Tilt Holding power<br />
adjustment adjustment adjustment adjustment with<br />
±2 mm +3/-1 mm ±1.5 mm SW10 Allen key<br />
Installation<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 3.43
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> <strong>Fittings</strong><br />
Maxi Swing Soft 3676 Complete set<br />
for one-piece flaps made of wood or with aluminium frame<br />
3<br />
Sample measurements table for max. flap weight<br />
Model A B C D<br />
<strong>Flap</strong> height mm <strong>Flap</strong> weight kg<br />
350 2.0 – 4.0 4.0 – 9.0<br />
450 2.0 – 4.0 4.0 – 8.0 6.5 – 11.0<br />
600 1.9 – 3.4 3.4 – 5.5 5.5 – 9.0 8.0 – 14.0<br />
700 - 3.0 – 4.5 4.5 – 7.5 7.5 – 11.0<br />
800 - - 4.5 – 7.0 7.0 – 10.0<br />
Supplied with<br />
2 Swing up front fittings (left/right)<br />
2 Cover caps for fitting<br />
2 Cover caps for mounting brackets<br />
Installation instructions<br />
Model With soft close Without soft close<br />
A 372.92.201 372.92.211<br />
B 372.92.202 372.92.212<br />
C 372.92.203 372.92.213<br />
D 372.92.204 372.92.214<br />
Packing: 1 set<br />
––> Swing Soft 3676 Accessories<br />
Adapter for 20 mm aluminium profile<br />
• Material: Zinc alloy<br />
• Mounting: Suitable for left h<strong>and</strong> <strong>and</strong> right h<strong>and</strong> use<br />
Supplied with<br />
Including 12 fixing screws.<br />
Finish<br />
Cat. No.<br />
Chrome plated matt 372.91.590<br />
Packing: 2 pieces<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 3.44<br />
New products <strong>and</strong> systems: www.hafele.com
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> <strong>Fittings</strong><br />
Verso 3684 Complete set<br />
for one-piece flaps made of wood or with aluminium frame<br />
• Material: Fitting: Steel, Cover cap: Plastic<br />
• Finish: Fitting: Silver coloured anodized, Cover cap: Grey, similar to RAL 9006<br />
3<br />
Adjustment facility<br />
Height adjustment Side adjustment Tilt<br />
±3 mm ±3 mm adjustment<br />
Holding power<br />
adjustment<br />
Opening angle<br />
adjustment<br />
Installation<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
Model A B C D<br />
<strong>Flap</strong> height mm <strong>Flap</strong> weight kg<br />
420 – 550 2.0 – 4.0 4.0 – 8.0 6.0 – 10.0 8.0 – 17.0<br />
550 – 650 2.0 – 3.5 3.5 – 7.0 6.0 – 10.0 9.0 – 16.0<br />
650 – 800 3.0 – 6.5 5.0 – 10.0 9.0 – 15.0<br />
Supplied with<br />
1 Swing up front fitting<br />
2 Cover caps<br />
2 Screw-on brackets<br />
1 Set of installation instructions<br />
Model<br />
Cat. No.<br />
A 372.67.901<br />
B 372.67.902<br />
C 372.67.903<br />
D 372.67.904<br />
Packing: 1 set<br />
Order reference<br />
Please order mounting brackets for aluminium profile <strong>and</strong> cross bar<br />
separately.<br />
Screw-on brackets for wood supplied.<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 3.45
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> <strong>Fittings</strong><br />
E-Verso 3687 (electric) Complete set<br />
for one-piece flaps made of wood or with aluminium frame<br />
• Material: Fitting: Steel, aluminium, Cover cap: Plastic<br />
• Finish: Fitting: Silver coloured anodized, Cover cap: Grey, similar to<br />
RAL 9006<br />
• Nominal voltage: 18 V<br />
• Input voltage: 100 – 240 V, 50 – 60Hz<br />
3<br />
• Electric opening <strong>and</strong> closing system for flaps<br />
• Programmable push-button sender for<br />
opening <strong>and</strong> closing the flap<br />
• Push-button sender suitable for operating<br />
several flap fittings<br />
• Quiet drive <strong>and</strong> soft closing action<br />
• Operating the flap in case of power failure<br />
possible with increased amount of effort<br />
• <strong>Flap</strong> can be operated without additional<br />
power assistance<br />
• Obstacle detection with auto-stop on both<br />
sides<br />
Push-button sender for recess installation in 35 mm cup<br />
drilling<br />
The push-button sender can be recess mounted in the furniture.<br />
Adjustment facility<br />
Height adjustment Side adjustment Tilt<br />
±3 mm ±3 mm adjustment<br />
Holding power<br />
adjustment<br />
Opening angle<br />
adjustment<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 3.46<br />
New products <strong>and</strong> systems: www.hafele.com
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> <strong>Fittings</strong><br />
E-Verso 3687 (electric) Complete set<br />
for one-piece flaps made of wood or with aluminium frame<br />
Installation<br />
Supplied with<br />
1 Push-button sender with battery<br />
1 Connecting cable (length 2000 mm) with angled Euro plug/<br />
male adapter<br />
1 Control unit with female adapter<br />
1 Allen key 4 mm<br />
2 <strong>Fittings</strong> with cover caps<br />
2 Base plates<br />
2 Screw-on brackets for wooden doors <strong>and</strong> wide aluminium frames<br />
2 Connecting plates left/right<br />
2 Adjusting parts<br />
2 Cam follower left/right<br />
2 Connecting cables for drives/control unit<br />
4 Screws M5 x 16 mm<br />
1 Set of installation <strong>and</strong> operating instructions<br />
3<br />
Model A B C D<br />
<strong>Flap</strong> height mm <strong>Flap</strong> weight kg<br />
420 2.0 – 5.0 4.0 – 9.0 6.0 – 12.0 10.0 – 18.0<br />
500 2.0 – 4.5 4.0 – 8.0 6.0 – 14.0 8.0 – 16.0<br />
600 2.0 – 4.5 4.0 – 8.0 6.0 – 11.0 8.0 – 15.0<br />
700 3.5 – 6.5 6.0 – 10.0 8.5 – 14.0<br />
800 3.0 – 5.5 5.0 – 9.5 8.0 – 12.0<br />
Model<br />
Cat. No.<br />
A 372.67.931<br />
B 372.67.932<br />
C 372.67.933<br />
D 372.67.934<br />
Packing: 1 set<br />
Order reference<br />
Please order mounting brackets for 20 mm wide aluminium frames<br />
<strong>and</strong> cross bar separately.<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
Screw-on brackets for wood supplied.<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 3.47
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> <strong>Fittings</strong><br />
––> Verso 3674 <strong>and</strong> E-Verso 3687 accessories<br />
Mounting brackets for flaps with aluminium frame, frame width 20 mm<br />
Installation<br />
3<br />
• Area of application: For mounting the swing up front fitting to flaps with aluminium frame, frame width 20 mm<br />
• Material: Steel<br />
• Finish: Nickel plated<br />
Suitable for<br />
Side panel thickness<br />
16 mm<br />
Side panel thickness<br />
19 mm<br />
Height H<br />
Cat. No.<br />
mm<br />
16 372.67.795<br />
19 372.67.796<br />
Packing: 2 pieces<br />
Cross bar<br />
• Area of application: For connecting both fitting components<br />
• Material: Aluminium<br />
• Finish: Silver coloured anodized<br />
Suitable for<br />
<strong>Flap</strong> width<br />
600 mm<br />
<strong>Flap</strong> width<br />
900 mm<br />
<strong>Flap</strong> width<br />
1200 mm<br />
<strong>Flap</strong> width<br />
1500 mm<br />
<strong>Flap</strong> width<br />
1800 mm<br />
Packing: 1 piece<br />
Side panel<br />
thickness W<br />
mm<br />
Length<br />
mm<br />
Cat. No.<br />
16/19 477 372.67.983<br />
16/19 777 372.67.985<br />
16/19 1077 372.67.987<br />
16/19 1377 372.67.989<br />
16/19 1677 372.67.990<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 3.48<br />
New products <strong>and</strong> systems: www.hafele.com
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> <strong>Fittings</strong><br />
Strato 3685 Complete set<br />
for one-piece flaps made of wood or with aluminium frame<br />
• Material: Fitting: Steel, Cover cap: Plastic<br />
• Finish: Fitting: Silver coloured anodized, Cover cap: Grey, similar to RAL 9006<br />
• Integrated soft close<br />
3<br />
Adjustment facility<br />
Height adjustment Side adjustment Tilt<br />
±3 mm ±3 mm adjustment<br />
Holding power<br />
adjustment<br />
Opening angle<br />
adjustment<br />
Installation<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
Installation dimensions<br />
<strong>Flap</strong><br />
height<br />
mm<br />
342 –<br />
420<br />
420 –<br />
500<br />
500 –<br />
550<br />
550 –<br />
650<br />
X Y D<br />
ca.<br />
H K R<br />
ca.<br />
S T U<br />
ca.<br />
342 186 308 295 205 28 0.8 333 200 50<br />
350 186 308 295 205 38 0.8 346 200 50<br />
420 186 308 295 205 98 0.8 416 200 50<br />
420 255 380 395 271 5 1.2 414 265 37<br />
450 255 380 395 271 35 1.2 444 265 37<br />
500 255 380 395 271 85 1.2 494 265 37<br />
500 293.5 420 450 312.5 30 1.3 494 295 37<br />
550 293.5 420 450 312.5 80 1.3 544 295 37<br />
550 313.5 440 480 332.5 50 1.3 544 315 37<br />
600 313.5 440 480 332.5 100 1.3 594 315 37<br />
600 313.5 440 480 332.5 150 1.3 644 315 37<br />
Supplied with<br />
1 Parallel lift up front fitting<br />
2 Cover caps<br />
2 Screw-on brackets for wood<br />
1 Set of installation instructions<br />
V<br />
<strong>Flap</strong> height<br />
mm<br />
<strong>Flap</strong> weight<br />
kg<br />
Cat. No.<br />
342 – 420 1.5 – 4.0 372.68.931<br />
4.0 – 7.2 372.68.932<br />
6.5 – 11.5 372.68.933<br />
420 – 500 2.0 – 3.5 372.68.901<br />
3.5 – 7.0 372.68.902<br />
6.5 – 11.0 372.68.903<br />
8.0 – 16.0 372.68.904<br />
500 – 550 3.8 – 10.0 372.68.913<br />
6.0 – 15.0 372.68.914<br />
550 – 650 3.5 – 10.0 372.68.923<br />
6.0 – 14.5 372.68.924<br />
Packing: 1 set<br />
Order reference<br />
Please order screw-on brackets for aluminium profiles <strong>and</strong> cross bar<br />
separately.<br />
Screw-on brackets for wood supplied.<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 3.49
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> <strong>Fittings</strong><br />
E-Strato 3688 (electric) Complete set<br />
for one-piece flaps made of wood or with aluminium frame<br />
• Material: Fitting: Steel, aluminium, Cover cap: Plastic<br />
• Finish: Fitting: Silver coloured anodized, Cover cap: Grey, similar to<br />
RAL 9006<br />
• Nominal voltage: 18 V<br />
• Input voltage: 100 – 240 V, 50 – 60Hz<br />
3<br />
• Electric opening <strong>and</strong> closing system for flaps<br />
• Programmable push-button sender for opening <strong>and</strong> closing the<br />
flap<br />
• Push-button sender suitable for operating several flap fittings<br />
• Quiet drive <strong>and</strong> soft closing action<br />
• Operating the flap in case of power failure possible with<br />
increased amount of effort<br />
• <strong>Flap</strong> can be operated without additional power assistance<br />
• Obstacle detection with auto-stop on both sides<br />
Push-button sender for recess installation in 35 mm cup drilling<br />
The push-button sender can be recess mounted in the furniture.<br />
Adjustment facility<br />
Height adjustment Side adjustment Tilt<br />
±3 mm ±3 mm adjustment<br />
Installation<br />
Holding power<br />
adjustment<br />
Opening angle<br />
adjustment<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 3.50<br />
New products <strong>and</strong> systems: www.hafele.com
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> <strong>Fittings</strong><br />
E-Strato 3688 (electric) Complete set<br />
for one-piece flaps made of wood or with aluminium frame<br />
Installation dimensions<br />
<strong>Flap</strong><br />
height<br />
mm<br />
X Y D<br />
ca.<br />
H K R<br />
ca.<br />
S T U<br />
ca.<br />
342 – 420 342 186 308 295 205 28 0.8 333 200<br />
350 186 308 295 205 38 0.8 346 200<br />
420 186 308 295 205 98 0.8 416 200<br />
420 – 500 420 255 380 395 271 5 1.2 414 265<br />
450 255 380 395 271 35 1.2 444 265<br />
500 255 380 395 271 85 1.2 494 265<br />
500 – 550 500 293.5 420 450 312.5 30 1.3 494 295<br />
550 293.5 420 450 312.5 80 1.3 544 295<br />
550 – 650 550 313.5 440 480 332.5 50 1.3 544 315<br />
600 313.5 440 480 332.5 100 1.3 594 315<br />
600 313.5 440 480 332.5 150 1.3 644 315<br />
3<br />
Supplied with<br />
1 Push-button sender with battery<br />
1 Connecting cable (length 2,000 mm) with angled Euro plug/male adapter<br />
1 Control unit with female adapter<br />
1 Allen key 4 mm<br />
2 <strong>Fittings</strong> with cover caps<br />
2 Base plates<br />
2 Screw-on brackets for wooden doors <strong>and</strong> wide aluminium frames<br />
2 Connecting plates left/right<br />
2 Adjusting parts<br />
2 Cam follower left/right<br />
2 Connecting cables for drives/control unit<br />
4 Screws M5 x 16 mm<br />
1 Set of installation <strong>and</strong> operating instructions<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
<strong>Flap</strong> height<br />
mm<br />
<strong>Flap</strong> weight<br />
kg<br />
Cat. No.<br />
342 – 420 1.5 – 4.0 372.68.941<br />
3.5 – 7.0 372.68.942<br />
6.0 – 10.5 372.68.943<br />
420 – 500 2.0 – 3.5 372.68.951<br />
3.0 – 7.0 372.68.952<br />
6.0 – 10.5 372.68.953<br />
8.0 – 14.0 372.68.954<br />
500 – 550 3.8 – 9.0 372.68.961<br />
7.0 – 12.0 372.68.962<br />
550 – 650 4.5 – 10.0 372.68.971<br />
6.0 – 11.0 372.68.972<br />
Packing: 1 set<br />
Order reference<br />
Please order mounting brackets for 20 mm wide aluminium frames <strong>and</strong> cross bar separately.<br />
Screw-on brackets for wood supplied.<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 3.51
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> <strong>Fittings</strong><br />
––> Strato 3685 <strong>and</strong> E-Strato 3688 accessories<br />
Mounting brackets for flaps with aluminium frame, frame width 20 mm<br />
Installation<br />
3<br />
• Area of application: For mounting the parallel lift up front fitting to flaps with aluminium, frame width 20 mm<br />
• Material: Steel<br />
• Finish: Nickel plated<br />
Suitable for<br />
Side panel thickness<br />
16 mm<br />
Side panel thickness<br />
19 mm<br />
Height H<br />
Cat. No.<br />
mm<br />
16 372.67.795<br />
19 372.67.796<br />
Packing: 2 pieces<br />
Cross bar<br />
• Area of application: For connecting both fitting components<br />
• Material: Aluminium<br />
• Finish: Silver coloured anodized<br />
Suitable for<br />
<strong>Flap</strong> width<br />
600 mm<br />
<strong>Flap</strong> width<br />
900 mm<br />
<strong>Flap</strong> width<br />
1200 mm<br />
<strong>Flap</strong> width<br />
1500 mm<br />
<strong>Flap</strong> width<br />
1800 mm<br />
Packing: 1 piece<br />
Side panel<br />
thickness W<br />
mm<br />
Length<br />
mm<br />
Cat. No.<br />
16/19 477 372.67.983<br />
16/19 777 372.67.985<br />
16/19 1077 372.67.987<br />
16/19 1377 372.67.989<br />
16/19 1677 372.67.990<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 3.52<br />
New products <strong>and</strong> systems: www.hafele.com
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> <strong>Fittings</strong><br />
Maxi 3675<br />
for flaps made of wood or with aluminium frame<br />
Model variants/mounting options<br />
3<br />
• For one-piece flaps made of wood or with aluminium frame, with h<strong>and</strong>le<br />
• Locks the flap reliably in any position <strong>and</strong> lets it gently slide downwards<br />
• With power assisted opening<br />
Maxi – edge distance 28/37 mm<br />
• For one-piece flaps made of wood or with aluminium frame, without h<strong>and</strong>le<br />
• Locks the flap reliably in any position <strong>and</strong> lets it gently slide downwards<br />
• Opening: A gentle push opens the flap slightly<br />
Closing: The flap is pushed back into the cabinet<br />
Stay closed feature: Magnet in the opening fitting <strong>and</strong> counterplate on the flap<br />
• H<strong>and</strong>le drilling not required<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
Maxi Touch opening – edge<br />
distance 63 mm<br />
Maxi – edge distance 63 mm<br />
• For one-piece flaps made of wood or with aluminium frame, with h<strong>and</strong>le<br />
• The Maxi fitting can also be used as classical version without "push-to-open" function for specific flap<br />
heights <strong>and</strong> weights by turning the screw-on bracket by 180° (screw-on bracket to the front) in flap<br />
direction. This reduces the opening resistance to a minimum.<br />
• Locks the flap reliably in any position <strong>and</strong> lets it gently slide downwards<br />
• Soft close<br />
• Trial mounting required<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 3.53
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> <strong>Fittings</strong><br />
Maxi 3675 Complete set<br />
for flaps made of wood or with aluminium frame<br />
• Opening angle: 75°, 90° or 110°<br />
• Material: Stay: Zinc alloy, Mounting bracket <strong>and</strong> screw-on bracket: Steel,<br />
Cover cap for adjusting screw: Plastic<br />
• Finish: Nickel plated, Cover cap: Grey<br />
• Colour: Model A: Grey, Model B: Beige, Model C: White, Model D: Black<br />
• Version: With power assisted opening<br />
• Mounting: Suitable for left h<strong>and</strong> <strong>and</strong> right h<strong>and</strong> use<br />
• Installation: Without tools (clip system) onto pre-mounted mounting bracket<br />
• Distance from edge: 28 or 37 mm (optional)<br />
3<br />
Adjustment facility<br />
Height Side Tilt Holding power<br />
adjustment adjustment adjustment adjustment with<br />
±3 mm ±3 mm ±1.5 mm SW10 Allen key<br />
Adjusting the braking effect<br />
Construction dimensions<br />
Angular bracket for mounting<br />
to wooden flaps<br />
Screw-on bracket for mounting<br />
to aluminium frames<br />
Supplied with<br />
1 Lid stay<br />
1 Mounting bracket for cabinet, edge distance 28 or 37 mm<br />
1 Mounting bracket for wooden flap (wide aluminium frame) or for<br />
20 mm aluminium frame<br />
Installation instructions<br />
Order reference<br />
The weight specification applies to one Maxi fitting.<br />
Order two Maxi fittings for flap widths from 600 mm <strong>and</strong> above.<br />
Model<br />
Distance from edge Cat. No.<br />
mm<br />
For wooden flaps <strong>and</strong> flaps with aluminium frame,<br />
from frame width 45 mm<br />
A 28 373.69.511<br />
37 373.69.512<br />
B 28 373.69.411<br />
37 373.69.412<br />
C 28 373.69.711<br />
37 373.69.712<br />
D 28 373.69.311<br />
37 373.69.312<br />
For flaps with aluminium frame, frame width 20 mm<br />
A 28 373.69.501<br />
37 373.69.502<br />
B 28 373.69.401<br />
37 373.69.402<br />
C 28 373.69.701<br />
37 373.69.702<br />
D 28 373.69.301<br />
37 373.69.302<br />
Packing: 1 or 10 pieces<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 3.54<br />
New products <strong>and</strong> systems: www.hafele.com
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> <strong>Fittings</strong><br />
––> Maxi 3675<br />
for one-piece flaps made of wood or with aluminium frame<br />
Choice of Maxi - edge distance 28/37mm<br />
• Locks the flap reliably in any position <strong>and</strong> lets it gently slide downwards<br />
• With power assisted opening<br />
Maxi 3675 complete set on page 3.54<br />
3<br />
With opening angle 75°<br />
Model A B C D<br />
<strong>Flap</strong> height <strong>Flap</strong> weight kg<br />
300 mm 3.8 - 7.1 6.7 - 13.7 11.9 - 21.0 15.4 - 27.3<br />
400 mm 2.8 - 5.3 5.0 - 10.3 8.9 - 15.8 11.6 - 20.5<br />
500 mm 2.3 - 4.3 4.1 - 8.3 7.2 - 12.5 9.4 - 16.2<br />
600 mm 1.9 - 3.5 3.3 - 7.0 5.9 - 10.6 7.6 - 13.7<br />
700 mm 1.6 - 3.0 2.8 - 5.7 5.0 - 8.8 6.5 - 11.4<br />
800 mm 1.4 - 2.7 2.5 - 5.1 4.4 - 7.9 5.7 - 10.4<br />
900 mm 1.3 - 2.4 2.2 - 4.6 4.0 - 7.0 5.2 - 9.1<br />
1000 mm 1.1 -2.1 2.0 - 4.1 3.6 - 6.3 4.6 - 8.2<br />
<strong>Flap</strong> with aluminium frame<br />
Wooden flap<br />
With opening angle 90°<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
<strong>Flap</strong> with aluminium frame<br />
Wooden flap<br />
Model A B C D<br />
<strong>Flap</strong> height <strong>Flap</strong> weight kg<br />
300 mm 3.0 - 5.3 5.1 - 10.2 9.1 - 15.8 11.9 - 20.8<br />
400 mm 2.3 - 4.0 3.8 - 7.6 6.9 - 11.9 8.9 - 15.6<br />
500 mm 1.8 - 3.2 3.1 - 6.1 5.5 - 9.6 7.2 - 12.5<br />
600 mm 1.5 - 2.7 2.6 - 5.1 4.6 - 7.9 6.0 - 10.4<br />
700 mm 1.3 - 2.2 2.1 - 4.2 3.8 - 6.6 4.9 - 8.7<br />
800 mm 1.1 - 2.0 1.9 - 3.9 3.4 - 5.9 4.4 - 7.8<br />
900 mm 1.0 - 1.8 1.7 - 3.4 3.0 - 5.2 3.9 - 6.9<br />
1000 mm 0.9 - 1.6 1.5 - 3.0 2.7 - 4.7 3.6 - 6.2<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 3.55
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> <strong>Fittings</strong><br />
––> Maxi 3675<br />
for one-piece flaps made of wood or with aluminium frame<br />
With opening angle 110°<br />
3<br />
Model A B C D<br />
<strong>Flap</strong> height <strong>Flap</strong> weight kg<br />
300 mm 2.4 – 4.0 3.9 – 7.5 6.8 – 11.6 9.2 – 15.0<br />
400 mm 1.8 – 3.0 2.9 – 5.6 5.1 – 8.7 6.9 – 11.2<br />
500 mm 1.4 – 2.4 2.4 – 4.5 4.0 – 7.1 5.7 – 9.0<br />
600 mm 1.2 – 2.0 1.9 – 3.8 3.3 – 5.9 4.5 – 7.6<br />
700 mm 1.0 – 1.7 1.7 – 3.1 2.9 – 4.8 3.8 – 6.2<br />
800 mm 0.9 – 1.4 1.4 – 2.8 2.6 – 4.3 3.4 – 5.6<br />
900 mm 0.8 – 1.3 1.3 – 2.5 2.3 – 3.8 3.0 – 5.0<br />
1000 mm 0.7 – 1.2 1.1 – 2.2 2.0 – 3.5 2.7 – 4.5<br />
<strong>Flap</strong> with aluminium frame<br />
Wooden flap<br />
––> Maxi Touch opening 3675<br />
for one-piece flaps without h<strong>and</strong>le<br />
for flaps made of wood or with aluminium frame<br />
With door opening system with mechanical opening aid<br />
Choice of Maxi Touch opening, edge distance 63 mm<br />
• Locks the flap reliably in any<br />
position <strong>and</strong> lets it gently slide<br />
downwards<br />
• Opening: A gentle push<br />
opens the flap slightly<br />
Closing: The flap is pushed<br />
back into the cabinet<br />
Stay closed feature: Magnet<br />
in the opening fitting <strong>and</strong><br />
counterplate on the flap<br />
• H<strong>and</strong>le drilling not required<br />
Model A B C D<br />
<strong>Flap</strong> height <strong>Flap</strong> weight kg<br />
75° 300 mm 2.0 – 3.8 4.0 – 7.7 7.0 – 14.0<br />
400 mm 1.6 – 3.1 3.0 – 6.3 5.0 – 11.5 7.0 – 12.5<br />
500 mm 1.3 – 2.5 2.7 – 5.2 4.7 – 8.4 5.5 – 10.5<br />
600 mm - 2.4 – 4.5 4.3 – 7.8 4.7 – 8.4<br />
700 mm - 2.2 – 4.0 4.0 – 7.5 4.3 – 8.0<br />
800 mm - - 3.6 – 6.2 3.9 – 7.3<br />
900 mm - - 3.4 – 5.8 3.5 – 6.7<br />
90° 300 mm 2.0 – 3.5 3.3 – 6.7 6.0 – 10.3 7.8 – 13.6<br />
400 mm 1.5 – 2.6 2.5 – 5.0 5.5 – 7.8 3.8 – 10.2<br />
500 mm 1.2 – 2.1 2.0 – 4.0 3.6 – 6.3 4.7 – 8.2<br />
600 mm 1.0 – 1.8 1.7 – 3.3 3.0 – 5.2 3.9 – 6.8<br />
700 mm 0.9 – 1.4 1.4 – 2.7 2.5 – 4.3 3.2 – 5.7<br />
800 mm 0.7 – 1.3 1.2 – 2.6 2.2 – 3.9 2.9 – 5.1<br />
900 mm 0.7 – 1.2 1.1 – 2.2 2.0 – 3.4 2.6 – 4.5<br />
1000 mm 0.6 – 1.0 1.0 – 2.0 1.8 – 3.1 2.4 – 4.1<br />
110° 300 mm 1.2 – 2.9 2.6 – 5.5 4.6 – 9.5<br />
400 mm 0.9 – 2.2 2.0 – 4.4 3.8 – 7.0 4.6 – 8.7<br />
500 mm 0.7 – 1.8 1.7 – 3.4 3.1 – 5.8 3.7 – 6.5<br />
600 mm - 1.4 – 3.0 2.6 – 4.7 3.1 – 5.8<br />
700 mm - - 2.3 – 4.1 2.8 – 4.5<br />
800 mm - - 2.0 – 3.8 2.4 – 4.1<br />
900 mm - - - 2.1 – 3.9<br />
1000 mm - - - 1.8 – 3.7<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 3.56<br />
New products <strong>and</strong> systems: www.hafele.com
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> <strong>Fittings</strong><br />
––> Maxi Touch opening 3675<br />
for one-piece flaps without h<strong>and</strong>le<br />
for flaps made of wood or with aluminium frame<br />
With opening angle 75° With opening angle 90° With opening angle 110°<br />
3<br />
Order reference<br />
The Maxi Touch opening fitting consists of Maxi 3675 lid stays, mounting brackets, magnetic door catches <strong>and</strong> counterplates.<br />
The weight specification applies to one Maxi fitting. Order two Maxi fittings for flap widths from 600 mm <strong>and</strong> above.<br />
• For <strong>Flap</strong>s without h<strong>and</strong>le (Touch opening) following components are required:<br />
Maxi 3675 individual component + mounting brackets (page 3.60)<br />
Magnetic door catch (page 3.57 <strong>and</strong> 3.58)<br />
Accessories for Maxi Touch opening 3675 Push Magnetic door catch, for mounting in drilled hole<br />
• Version: With magnet for holding in closed position<br />
• Material: Plastic<br />
• Colour: Beige<br />
• Mounting: For mounting in drilled hole in cabinet top or base<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
With counterplate<br />
for glue fixing<br />
Counterplate for knocking in<br />
With counterplate<br />
for knocking in<br />
With counterplate<br />
for knocking in<br />
Installation<br />
Cat. No.<br />
Counterplate for knocking in 356.06.401<br />
Counterplate for glue fixing 356.06.402<br />
Packing: 1 or 50 pieces<br />
• Material: Steel<br />
• Installation: For knocking in<br />
Finish<br />
Cat. No.<br />
Galvanized 246.08.910<br />
Packing: 1 or 1000 pieces<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 3.57
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> <strong>Fittings</strong><br />
––> Maxi Touch opening 3675<br />
for one-piece flaps without h<strong>and</strong>le<br />
for flaps made of wood or with aluminium frame<br />
Cruciform adapter housing for screw fixing<br />
With positioning aid<br />
With positioning aid<br />
Without positioning aid<br />
3<br />
• Material: Plastic<br />
• Colour: Beige<br />
• Mounting: For screw fixing to cabinet top or base<br />
Cat. No.<br />
With positioning aid 356.06.410<br />
Without positioning aid 356.06.420<br />
Packing: 1 or 50 pieces<br />
Order reference<br />
Magnetic door catch not supplied, please order separately.<br />
––> Maxi 3675<br />
edge distance 63 mm (screw-on bracket turned)<br />
for one-piece flaps with h<strong>and</strong>le<br />
for flaps made of wood or with aluminium frame<br />
Choice of Maxi, edge distance 63 mm<br />
• The Maxi fitting can also be used as classical version without "push-to-open" function for specific flap heights<br />
<strong>and</strong> weights by turning the screw-on bracket by 180° (screw-on bracket to the front) in flap direction. This<br />
reduces the opening resistance to a minimum.<br />
• Locks the flap reliably in any position <strong>and</strong> lets it gently slide downwards<br />
• Soft close<br />
• Trial mounting required<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 3.58<br />
New products <strong>and</strong> systems: www.hafele.com
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> <strong>Fittings</strong><br />
––> Maxi 3675<br />
edge distance 63 mm (screw-on bracket turned)<br />
for one-piece flaps with h<strong>and</strong>le<br />
for flaps made of wood or with aluminium frame<br />
Model A B C D<br />
<strong>Flap</strong> height <strong>Flap</strong> weight kg<br />
75° 400 mm 2.2 – 4.0 4.3 – 8.2 7.1 – 14.0<br />
500 mm 1.8 – 3.2 3.4 – 7.0 6.4 – 11.5 6.8 – 13.4<br />
600 mm 1.6 – 3.0 2.9 – 5.5 5.1 – 10.0 6.4 – 11.2<br />
700 mm 1.4 – 2.8 2.6 – 5.1 4.9 – 9.1 5.3 – 10.2<br />
800 mm - 2.4 – 4.6 4.0 – 7.4 4.9 – 9.0<br />
900 mm - 2.2 – 4.4 3.8 – 7.0 4.7 – 8.2<br />
1000 mm - 2.0 – 4.2 3.5 – 6.7 4.4 – 7.6<br />
90° 300 mm 2.7 – 5.1 5.0 – 8.5 8.0 – 12.0 9.0 – 15.0<br />
400 mm 2.1 – 3.5 4.5 – 6.7 5.8 – 11.2 7.2 – 13.5<br />
500 mm 1.6 – 2.6 3.5 – 5.5 4.5 – 8.8 6.0 – 11.0<br />
600 mm 1.3 – 2.2 2.7 – 4.3 3.9 – 7.7 4.8 – 8.5<br />
700 mm 1.2 – 2.0 2.5 – 3.7 3.2 – 6.4 4.2 – 7.6<br />
800 mm - 2.4 – 3.4 3.0 – 5.4 3.5 – 6.7<br />
900 mm - - 2.7 – 5.2 3.0 – 6.0<br />
1000 mm - - - 2.7 – 5.5<br />
110° 300 mm 1.4 – 3.2 3.1 – 5.9 5.4 – 10.0<br />
400 mm 1.2 – 2.5 3.0 – 5.0 4.2 – 8.1 4.8 – 9.0<br />
500 mm 0.9 – 2.0 2.2 – 3.8 3.2 – 6.3 2.8 – 7.5<br />
600 mm 0.7 – 1.5 1.9 – 3.5 2.7 – 6.0 3.5 – 6.8<br />
700 mm - 1.7 – 2.7 2.5 – 4.5 3.0 – 5.2<br />
800 mm - - 2.2 – 3.6 2.6 – 4.7<br />
900 mm - - - 2.3 – 4.3<br />
1000 mm - - - 2.0 – 4.0<br />
3<br />
With opening angle 75° With opening angle 90° With opening angle 110°<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
Order reference<br />
The Maxi fitting consists of Maxi 3675 lid stays <strong>and</strong> mounting brackets.<br />
The weight specification applies to one Maxi fitting.<br />
Order two Maxi fittings for flap widths from 600 mm <strong>and</strong> above.<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 3.59
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> <strong>Fittings</strong><br />
––> Individual component for Maxi <strong>and</strong> Maxi Touch opening 3675 <strong>and</strong> accessories<br />
Maxi 3675 Lid stay<br />
• Opening angle: 75°, 90° or 110°<br />
• Material: Zinc alloy<br />
• Finish: Nickel plated<br />
• Version: With power assisted opening<br />
• Mounting: Suitable for left h<strong>and</strong> <strong>and</strong> right h<strong>and</strong> use<br />
Supplied with<br />
1 Lid stay<br />
Installation instructions<br />
3<br />
Model Colour Cat. No.<br />
A Grey 373.69.902<br />
B Beige 373.69.900<br />
C White 373.69.901<br />
D Black 373.69.903<br />
Packing: 1 piece<br />
Mounting bracket<br />
Cat. No.<br />
For edge distance (cabinet) 37 or 63 mm 373.69.906<br />
For edge distance (cabinet) 28 mm 373.69.907<br />
• Area of application: For mounting the lid stay to the cabinet<br />
• Material: Steel<br />
• Finish: Nickel plated<br />
Packing: 1 piece<br />
Mounting bracket<br />
For wooden flaps or<br />
For flaps with aluminium frame,<br />
flaps with aluminium frame, frame width 20 mm<br />
from frame width 45 mm<br />
• Area of application: For mounting the lid stay to the flap<br />
• Material: Steel<br />
• Finish: Nickel plated<br />
Soft-closing mechanism<br />
Allen key, L shape<br />
• Material: Steel<br />
Installation<br />
Cat. No.<br />
For wooden flaps or flaps with aluminium frame,<br />
from frame width 45 mm<br />
For Varianta special screw 373.69.904<br />
For chipboard screws 373.69.911<br />
With slide-on clip (for quick fixing),<br />
373.69.908<br />
for Varianta special screw<br />
With slide-on clip (for quick fixing),<br />
373.69.912<br />
for chipboard screws<br />
For flaps with aluminium frame, frame width 20 mm<br />
With slide-on clip (for quick fixing) 373.69.909<br />
Without slide-on clip 373.69.905<br />
Packing: 1 piece<br />
• Area of application: For edge distance 28 <strong>and</strong> 37 mm<br />
• Material: Zinc alloy<br />
Finish<br />
Cat. No.<br />
Nickel plated 373.69.799<br />
Packing: 1 or 10 pieces<br />
Key size<br />
Finish<br />
Cat. No.<br />
mm<br />
10 Black 008.28.100<br />
Packing: 1 piece<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 3.60<br />
New products <strong>and</strong> systems: www.hafele.com
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> <strong>Fittings</strong><br />
Duo 3667/Duo forte 3666 Complete set<br />
for flaps made of wood or with aluminium frame<br />
With adjustable spring force<br />
Use as lid stay, wooden flap<br />
Use as lid stay,<br />
Use as flap stay, wooden flap<br />
3<br />
flap with aluminium frame<br />
• Area of application: Also suitable for use as flap stay<br />
• Opening angle: 75°, 90° or 110°<br />
• Material: Stay: Zinc alloy, Mounting bracket: Steel<br />
• Finish: Nickel plated<br />
• Version: With self closing function<br />
• Mounting: For left <strong>and</strong> right h<strong>and</strong> use<br />
• Installation: Without tools (clip system)<br />
• Distance from edge: 28 mm or 37 mm (optional)<br />
• For aluminium frame width 20 mm or from 45 mm<br />
• Lock function: <strong>Flap</strong> locks in any position, braking function: <strong>Flap</strong> locks in end position, release by slight pressure<br />
Function<br />
Setting the braking effect to locking<br />
<strong>and</strong> braking by adjusting the screw<br />
with a SW4 hexagon socket<br />
Note on Duo<br />
When used as flap stay, a magnet has to be fitted.<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
Note on Duo forte<br />
When used as flap stay, a magnet has to be fitted with an installation height of 189 + 32 mm <strong>and</strong> a projection of 160 + 32 mm.<br />
Installation reference<br />
Note minimum installation depth.<br />
Duo: 135 mm<br />
Duo forte: 175 mm<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 3.61
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> <strong>Fittings</strong><br />
Duo 3667/Duo forte 3666 Complete set<br />
for flaps made of wood or with aluminium frame<br />
With adjustable spring force<br />
Installation<br />
Duo 3667<br />
3<br />
Duo forte 3666<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 3.62<br />
New products <strong>and</strong> systems: www.hafele.com
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> <strong>Fittings</strong><br />
––> Duo 3667 Complete set<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
Sample measurements table for max. flap weight<br />
<strong>Flap</strong> height<br />
mm<br />
max. flap weight kg<br />
Lock function<br />
Braking function<br />
1 Stay 2 Stays 1 Stay 2 Stays<br />
For opening angle 75°<br />
200 9.0 15.0 11.5 15.0<br />
250 7.0 15.0 9.0 15.0<br />
300 6.0 12.0 7.5 15.0<br />
350 5.0 10.0 6.5 13.0<br />
400 4.5 9.0 6.0 11.5<br />
450 4.0 8.0 5.0 10.0<br />
500 3.5 7.0 4.5 9.0<br />
For opening angle 90°<br />
200 7.5 15.0 9.5 15.0<br />
250 6.0 12.0 7.5 15.0<br />
300 5.0 10.0 6.0 13.0<br />
350 4.0 8.5 5.5 11.0<br />
400 3.5 7.0 5.0 10.0<br />
450 3.5 6.5 4.0 8.5<br />
500 3.0 6.0 4.0 8.0<br />
For opening angle 110°<br />
200 6.0 12.0 8.0 15.0<br />
250 5.0 9.5 6.0 12.0<br />
300 4.0 8.0 5.0 10.0<br />
350 3.0 7.0 4.0 9.0<br />
400 3.0 6.0 4.0 7.5<br />
450 2.5 5.0 3.5 7.0<br />
500 2.0 5.0 3.0 6.0<br />
Supplied with<br />
1 Lid stay<br />
1 Mounting bracket<br />
1 Screw-on bracket<br />
Installation instructions<br />
Area of application<br />
For wooden flaps or flaps with aluminium<br />
frame, from frame width 45 mm<br />
For flaps with aluminium frame,<br />
frame width 20 mm<br />
Packing: 1 piece<br />
Adjustment facility<br />
Edge<br />
distance<br />
mm<br />
Cat. No.<br />
28 373.66.611<br />
37 373.66.612<br />
28 373.66.621<br />
37 373.66.622<br />
Height Side Tilt Pull<br />
adjustment adjustment adjustment adjustment<br />
+2 mm +3/-1 mm ±1.5 mm<br />
3<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 3.63
<strong>Hinges</strong> <strong>and</strong> <strong>Flap</strong> <strong>Fittings</strong><br />
<strong>Flap</strong> <strong>Fittings</strong><br />
––> Duo forte 3666 Complete set<br />
3<br />
Sample measurements table for max. flap weight<br />
<strong>Flap</strong> height<br />
mm<br />
max. flap weight kg<br />
Lock function Braking function<br />
1 Stay 2 Stays 1 Stay 2 Stays<br />
For opening angle 75°<br />
200 14.0 15.0 15.0 15.0<br />
250 11.5 15.0 15.0 15.0<br />
300 9.0 15.0 12.0 15.0<br />
350 8.0 15.0 11.0 15.0<br />
400 7.0 14.0 9.0 15.0<br />
450 6.0 12.5 8.0 15.0<br />
500 5.5 11.0 7.0 15.0<br />
550 5.0 10.0 6.5 13.0<br />
600 5.0 9.5 6.0 12.0<br />
650 4.0 8.5 5.5 11.0<br />
700 4.0 8.0 5.0 10.5<br />
For opening angle 90°<br />
200 12.5 15.0 15.0 15.0<br />
250 9.5 15.0 12.0 15.0<br />
300 8.0 15.0 10.0 15.0<br />
350 7.0 13.5 9.0 15.0<br />
400 6.0 12.0 8.0 15.0<br />
450 5.0 11.0 7.0 14.0<br />
500 5.0 9.5 6.0 12.0<br />
550 4.0 8.5 5.5 11.0<br />
600 4.0 8.0 5.0 10.0<br />
650 3.5 7.0 5.0 9.5<br />
700 3.0 7.0 4.0 9.0<br />
For opening angle 110°<br />
200 9.5 15.0 12.5 15.0<br />
250 7.5 15.0 10.0 15.0<br />
300 6.5 12.5 8.0 15.0<br />
350 5.5 11.0 7.0 14.0<br />
400 4.5 9.5 6.0 12.5<br />
450 4.0 8.5 5.5 11.0<br />
500 4.0 7.5 5.0 10.0<br />
550 3.5 7.0 4.0 9.0<br />
600 3.0 6.0 4.0 8.0<br />
650 3.0 5.5 4.0 7.5<br />
700 3.0 5.0 3.5 7.0<br />
Supplied with<br />
1 Lid stay<br />
1 Mounting bracket<br />
1 Screw-on bracket<br />
Installation instructions<br />
Area of application<br />
For wooden flaps or flaps with aluminium<br />
frame, from frame width 45 mm<br />
For flaps with aluminium frame,<br />
frame width 20 mm<br />
Packing: 1 piece<br />
Edge<br />
distance<br />
mm<br />
Cat. No.<br />
28 373.66.631<br />
37 373.66.632<br />
28 373.66.641<br />
37 373.66.642<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 3.64<br />
New products <strong>and</strong> systems: www.hafele.com