Download Brochure - Hilco Industrial

ONLINE AUCTION 

Due to plant decomissioning, assets no longer required by 

Toolroom, Material Handling, 

Plant Support & Mobile Equipment 

Online Bidding Starts: Tuesday, June 23rd at 10am ET 

Online Bidding Ends: Tuesday, June 30th 

Assets Located In Norfolk, Virginia 

Hilco Industrial, LLC 

A u c t i o n e e r s • L i q u i d a t o r s • A p p r a i s e r s 

Atlanta • Birmingham • Boston • Charlotte • Chicago • Dallas • Detroit • Grand Rapids • Guadalajara (MX) • Hong Kong 

Irapuato (MX) • Leeds (UK) • London (UK) • Los Angeles • Mexico City (MX) • Monterrey (MX) • New York 

San Francisco • Southampton (UK) • Toronto • Villahermosa (MX) 

www.hilcoind.com


Due to plant decomissioning, 

assets no longer required by 

MILLS • LATHES • SURFACE GRINDERS 

Online Bidding Starts 

Tuesday, June 23rd at 10am ET 

Online Bidding Ends 

Tuesday, June 30th 

Please check www.hilcoind.com 

for closing times. 

Preview 

Tuesday & Wednesday, 

June 23rd & 24th by appointment only. 

Please contact Jason Levy at 

248.914.4226 or Email 

jlevy@hilcoind.com 

Preview Location 

Ford Norfolk Assembly 

2424 Ford Drive • Norfolk, VA 23523 

Directions to Sale 

From Norfolk International Airport: 

Exit Airport to I-64 East. Take I-64 East 

9 Miles to Indian River Rd West, Exit #286A. Follow 

Indian River Rd. West 3.5 Miles to Ford Dr. On Right 

(Immediately Over Bridge). Turn Right on Ford 

Drive, Plant is on Right. 

Travel Information 

Airlines: 

American Airlines . . . . . . . . . . . 800.433.7300 

Northwest Airlines . . . . . . . . . . . 800.225.2525 

United Airlines . . . . . . . . . . . . . 800.241.6522 

Delta Airlines . . . . . . . . . . . . . . 800.221.1212 

Southwest Airlines . . . . . . . . . . 800.435.9792 

Further Information 

• A buyer’s premium will be in effect. 

The auction will be conducted online in 

English, accepting U.S. Currency only. 

• All riggers are welcome but must have 

$5,000,000 of insurance and sit through 

1 hour of safety talk with the plant. 

• Removal Deadline is Friday, July 31st 

with Hours of Removal between 8am to 

4pm Monday thru Friday by appointment 

only. If the item is hand carry, the bidder 

can pick up the item themselves. After 

July 31st at 4pm buyer will incur a cost 

of $500 daily for entry into the facility. 

• For further information on equipment 

please contact Jason Levy at 248.914.4226 

or Email jlevy@hilcoind.com 

• For Payments please contact 

Pam Anders at 248.254.9999 x35 or 

Email panders@hilcoind.com 

• For Customer Service please contact 

Sandi Neely at 248.254.9999 x16 

or Email sneely@hilcoind.com 

ACER ULTIMA-3VK 3-HP 

VARIABLE SPEED 

VERTICAL MILLING MACHINE 

TRENS MODEL SN50C 19” X 25” X 84” 

GAP BED ENGINE LATHE 

LAGUN MODEL FU-TV-140 

VERTICAL/HORIZONTAL 

MLLING MACHINE 

KEARNEY & TRECKER MILWAUKEE 

MODEL 2H PLAIN HORIZONTAL 

MILLING MACHINE 

CLAUSING COLCHESTER 21” X 60” GEARED 

HEAD ENGINE LATHE 

MILLING MACHINES 

1 – LAGUN MODEL FU-TV-140 VERTICAL/HORIZONTAL MLLING MACHINE, S/N N/A 11-3/4” x 55” Table, Vertical 

Spindle Speeds 60 - 4200 RPM, Horizontal Spindle Speeds 35 - 1800 RPM, 3-Way Power Feeds (Body Shop 

Toolroom - T-04-B) 

1 – ACER MODEL ULTIMA-3VK 3-HP VARIABLE SPEED VERTICAL MILLING MACHINE, S/N 96090841 (1996), 

Spindle Speeds 60 - 4200 RPM, Table Size 9” x 48”, Servo 150 Power Table/Saddle/& Knee Feeds, Kurt Power 

Drawbar, AcuRite MillMate Readout (West Paint Toolmakers Shop) 

1 – BRIDGEPORT 2-HP VARIABLE SPEED VERTICAL MILLING MACHINE, S/N BR-262650, Spindle Speeds 

60 - 4200 RPM, 9” x 48” Table, Power Table/Saddle/& Knee Feeds, Newall 3-Axis Readout (Body Shop Toolroom) 

1 – KEARNEY & TRECKER MILWAUKEE MODEL 2H PLAIN HORIZONTAL MILLING MACHINE, S/N 35-3692, 

Table Size 10” x 50”, Spindle Speeds 35 - 1400 RPM (Rubbish Bldg) 

ENGINE LATHES 

1 – TRENS MODEL SN50C 19” X 25” X 84” GAP BED ENGINE LATHE, S/N 08-50-20-98 0256, (24) Spindle Speeds 

22.4 - 2000 RPM, Quick Change Threading, 2” Hole-Thru Spindle, Coolant (Central Area Maintenance # KK-23) 

1 – SHARP MODEL 2280C 22/30” X 80” GAP BED ENGINE LATHE, S/N 5807021, (12) Spindle Speeds 15 -1500 

RPM, Quick Change Threading, Taper Attachment, 3” Hole-Thru Spindle, Coolant (Body Shop Toolroom) 

1 – CLAUSING COLCHESTER 21” X 60” GEARED HEAD ENGINE LATHE, S/N 8/0222/03998, Spindle Speeds 

18 - 1400, Quick Change Threading, 3-1/2” Hole-Thru Spindle, Taper Attachment (Col. #JJ-24-7) 

1 – DOALL MODEL 17, 17” X 60” GEARED HEAD ENGINE LATHE, S/N NA, (18) Spindle Speeds 40 - 2120 RPM, 

Quick Change Threading, Taper Attachment, 3” Hole-Thru Spindle, Coolant (Body Shop Toolroom) 

1 – MONARCH MODEL 16, 16” X 54” ENGINE LATHE, S/N 32925, Spindle Speeds 17 - 700 RPM, Quick Change 

Threading, Taper Attachment, 1-5/8” Hole-Thru Spindle (Rubbish Bldg) 

1 – CLAUSING COLCHESTER 15” X 48” ENGINE LATHE, S/N VT0272/201, (12) Spindle Speeds 15 - 2500 RPM, 

Quick Change Threading, 2” Hole-Thru Spindle, Coolant (Central Area Maintenance # KK-23) 

1 – CLAUSING COLCHESTER 15” X 48” GEARED HEAD ENGINE LATHE, S/N VT0123, (12) Spindle Speeds 

15 – 2500 RPM, Quick Change Threading, Taper Attachment, 2” Hole-Thru Spindle, Coolant (West Paint Toolmakers Shop) 

1 – ACER MODEL DYNAMIC 1440G 14/21” X 40” GAP BED ENGINE LATHE, S/N 98111323 (1998), (8) Spindle 

Speeds 65 – 2000 RPM, Quick Change Threading, 1-1/2” Hole-Thru Spindle (West Paint Toolmakers Shop) 

SURFACE GRINDERS 

1 – OKAMOTO MODEL 820A 8” X 20” HYDRAULIC SURFACE GRINDER, S/N 1317, Electromagnetic Chuck, With 

Neutrofier II Control, Overhead Dresser, Incremental Down Feed, Coolant, With 6” Magnetic Separator 

(West Paint Toolmakers Shop) 

1 – HARIG MODEL 618 AUTOMATIC 6” X 18” HYDRAULIC SURFACE GRINDER, S/N 8690-H, Walker 

Electromagnetic Chuck, With Microprocessor Variable Control (Body Shop Toolroom) 

1 – HARIG MODEL 618 AUTOMATIC 6” X 18” HYDRAULIC SURFACE GRINDER, S/N 8029-H, Walker 

Electromagnetic Chuck, With Microprocessor Variable Control (Rubbish Bldg) 

2 

For more information, visit us on the web @ www.hilcoind.com

DRILLS • SAWS • METAL FABRICATION • INSPECTION 

OKAMOTO MODEL 820A 8” X 20” 

HYDRAULIC SURFACE GRINDER 

SUNNEN MBB 1660 

PRECISION HONE 

W.F. WELLS L-10 10” X 12” CAPACITY 

HORIZONTAL METAL CUTTING BANDSAW 

WILTON 3410 6” CAPACITY HORIZONTAL 

METAL CUTTING BANDSAW 

UNI-HYDRO 120-24 

HYDRAULIC IRONWORKER 

CINCINNATI MODEL 90CBX10FT 90-TON X 10’ 

HYDRAULIC PRESS BRAKE 

PORTAGE MODEL 60A DUAL HORIZONTAL ARM UNIVERSAL 

BODY GAGE/LAYOUT MACHINE 

DRILLS 

1 – CINCINNATI BICKFORD SUPER SERVICE 21” SLIDING 

HEAD BOX COLUMN DRILL, S/N N/A, (9) Spindle 

Speeds 75 – 1500 RPM, (Col.# OGG-15) 

1 – WILTON-STRAND MODEL 24514 24” GEARED HEAD 

FLOOR TYPE DRILL, S/N 90610, (8) Spindle Speeds 

85 – 1460 RPM, Power Down Feed (Body Shop Toolroom) 

HONING MACHINE 

1 – SUNNEN MBB 1660 PRECISION HONE, S/N 301-93862, 

With Accessories (West Paint Toolmakers Shop) 

SAWS 

1 – W.F. WELLS MODEL L-10 10” X 12” CAPACITY 

HORIZONTAL METAL CUTTING BANDSAW, S/N 

L021262 (Body Shop Toolroom) 

1 – W.F. WELLS MODEL L-10 10” X 12” CAPACITY 

HORIZONTAL METAL CUTTING BANDSAW, 

S/N L-91459 (West Paint NE Millwright) 

1 – WILTON MODEL 7040 10” X 10” CAPACITY 

HORIZONTAL METAL CUTTING BANDSAW, S/N 610014 

(West Paint Toolmakers Shop) 

1 – WILTON MODEL 3410 6” CAPACITY HORIZONTAL 

METAL CUTTING BANDSAW, S/N 17395, Portable 

(Body Shop Toolroom) 

1 – DAYTON MODEL 9Y942 18” VERTICAL BANDSAW, 

S/N NA (Col.# OGG-15) 

METAL FABRICATING 

EQUIPMENT 

1 – UNI-HYDRO 120-24 HYDRAULIC IRONWORKER, 

S/N 3R12073X, With Punch, Angle & Flat Shear 

(West Paint NE Millwright Shop) 

1 – CINCINNATI MODEL 90CBX10FT 90-TON X 10’ 

HYDRAULIC PRESS BRAKE, S/N 44997, 8” Maximum 

Stroke (Body Shop Col.# D-12-B) 

1 – CINCINNATI MODEL 1812 1/4” X 12’ POWER 

SQUARING SHEAR, S/N 13611, Manual Back gauge 

(Body Shop Col.# C-12-B) 

MISCELLANEOUS TOOLROOM/ 

SHOP & FACTORY EQUIPMENT 

1 – OTC HEAVY WEIGHT 6000-LB. CAPACITY PORTABLE HYDRAULIC SHOP CRANE 

(West Paint Compressor Room) 

1 – DAKE MODEL 50-H 50-TON H-FRAME HYDRAULIC SHOP PRESS, S/N N/A, Manual Hydraulics 

(Body Shop Toolroom) 

1 – LISTA MULTI-DRAWER TOOL CABINETS (Central Area Maintenance #KK-23) 

Strong Hold & Other Mfg’rs 2-Door Heavy-Duty Steel Cabinets (Throughout Plant) 

1 – 8’ X 16’ X 7/8” HEAVY-DUTY STEEL LAYOUT/WELDING TABLE (JJ-24-7) 

1 – 4’ X 8’ X 1” HEAVY-DUTY STEEL WORKBENCH/WELDING TABLE, With Wilton 6” Heavy-Duty Bench 

Vise & Dake No. 3 Arbor Press (West Paint Toolmakers Shop) 

1 – 4’ X 8’ X 1/2” HEAVY-DUTY STEEL WORKBENCH/WELDING TABLE, With Wilton Vise (West Paint 

Toolmakers Shop) 

1 – 118” X 142” X 1” THICK HEAVY-DUTY STEEL LAYOUT/WELDING TABLE (West Paint NE Millwright) 

1 – RIDGID MODEL 1224 4” POWER PIPE THREADER, S/N EB 06583 (Central Area Maintenance #KK-23) 

1 – BALDOR MODEL NO. 1215W 12” 2-HP DOUBLE-END PEDESTAL GRINDER, S/N P9-93, (West Paint 

NE Millwright) 

1 – BALDOR MODEL NO. 1216W 12” 3-HP DOUBLE-END PEDESTAL GRINDER (Col.# JJ-24-7) 

1 – DAKE MODEL NO. 4MP FLOOR TYPE ARBOR PRESS (Body Shop Toolroom) 

1 – HEINS MODEL B-25 BALANCING MACHINE, S/N 96702, With Model 10KBT Amplifier, S/N 10-K-BT-01 

602 (West Paint Toolmakers Shop) 

1 – GRACO 2-STATION PNEUMATIC SEALANT PUMP SYSTEM, Tote Size, Part No. 970140, Series 199C, 

Common Control Panel (Shopping #OGG-17) 

1 – GRUENBERG MODEL C65V120 24 KW ELECTRIC LAB OVEN, S/N 19469, 24” x 24” x 36” 

(Paint Kitchen) 

1 – THERMOLYNE MODEL 30400 ELECTRIC LAB FURNACE, MODEL & S/N NA (West Paint Toolmakers 

Shop) 

MISCELLANEOUS SHOP & FACTORY EQUIPMENT INCLUDING: Maintenance Supplies, Shop & Factory, 

Motors, Pumps, Electrical, Hardware, Safety Mirrors, Lift Tables, Conveyor Tables, Storage Cabinets, etc. 

INSPECTION/LAYOUT EQUIPMENT 

1 – PORTAGE MODEL 60A DUAL HORIZONTAL ARM UNIVERSAL BODY GAGE/LAYOUT MACHINE, 

S/Ns 56556, 56555, 60” Vertical Travel, 120mm Vertical Horizontal Arm Travel, Manual Travels, Each With 

Sony 3-Axis Programmable Readout, 10’ x 23’ Steel Layout Floor Table (No Fixturing Included) 

(FUO Bldg – QC Room – T-9-B) (P 25, 30) 

1 – CHALLENGE MODEL NO. PF-7228806-14 12’ X 24’ 2-PIECE PRECISION STEEL LAYOUT FLOOR 

TABLE, S/N 901114, 6 Wide Sections, 9-1/2” Square Grid Pattern, (No Fixturing Included) 

(Body Shop – QC Room – T-12-B) (P 17, 18) 

1 – 130” X 18’ 2-PIECE STEEL LAYOUT FLOOR TABLE (No Fixturing Included) 

(Body Shop – QC Room – T-11-B) (P 19, 20) 

To schedule an auction, please contact us at 248.254.9999 3

HYDRAULIC CRANES • SCISSORS LIFTS • FORKLIFTS 

JLG COMMANDER MODEL CM2033 

ELECTRIC SCISSORS LIFT PLATFORM 

UP-RIGHT MODEL 61-800 ELECTRIC 

SCISSORS LIFT PLATFORM 

TENNANT MODEL 515SS ELECTRIC 

RIDER POWER FLOOR SCRUBBER 

WORK FORCE BATTERY 

POWERED PERSONNEL 

MAINTENANCE LIFT 

RAYMOND MODEL 60-C50TT 5000-LB. CAPACITY 

STAND-UP RIDER ELECTRIC FORKLIFT 

RAYMOND MODEL 640-C40TT 4000-LB 

STAND-UP RIDER ELECTRIC FORKLIFT 

UNITED MODEL 2500BEE ELECTRIC PLANT 

MAINTENANCE/WELDING TRUCK 

SCISSORS LIFT PLATFORMS 

1 – JLG COMMANDER MODEL CM2033 ELECTRIC SCISSORS LIFT PLATFORM, S/N 4540200008274, 

20’ Max. Platform Height, 750-Lb. Capacity, 26” x 92” Platform (A# 04) 

1 – JLG COMMANDER MODEL CM2033 ELECTRIC SCISSORS LIFT PLATFORM, S/N C455020000827, 


1 – JLG COMMANDER MODEL CM2033 ELECTRIC SCISSORS LIFT PLATFORM, S/N 2000095901, 


1 – UP-RIGHT MODEL 61-800 ELECTRIC SCISSORS LIFT PLATFORM, S/N 3713, 19’ Max. 

Height,550-Lb. Capacity, 26” x 78” Platform (A# 03) 

MAINTENANCE LIFT 

1 – WORK FORCE BATTERY POWERED PERSONNEL MAINTENANCE LIFT, S/N 1951-0104, 

18’ 11” Max. Height, Manual Travel (Col.# OGG-17) 

FORKLIFTS 

1 – RAYMOND MODEL 60-C50TT 5000-LB. CAPACITY STAND-UP RIDER ELECTRIC FORKLIFT, 

S/N 060-86-3613, 176” Lift, Side Shift, 36 Volt (A# 506) (Final Maintenance Shop JJ-24-7) 

1 – RAYMOND MODEL 640-C40TT 4000-LB STAND-UP RIDER ELECTRIC FORKLIFT, 

S/N 640-97-07589, 200” Lift, 36 Volt, Power Fork Adjustment, Side Shift (A# 502) 

FLOOR SCRUBBERS & SWEEPERS 

1 – TENNANT MODEL 550 ARTICULATED TYPE POWER FLOOR SCRUBBER, S/N 550-7096, 

LPG (A# 636B) 

1 – TENNANT MODEL 550 ARTICULATED RIDER TYPE POWER FLOOR SCRUBBER, S/N 550-4999, 

LPG, 55” Scrubber & Squeegees, Rear Trailer Tank (A# 635) 

1 – TENNANT MODEL 528 LPG RIDER TYPE POWER FLOOR SCRUBBER, S/N 528-32825 (A# 634) 

1 – TENNANT MODEL 515SS ELECTRIC RIDER POWER FLOOR SCRUBBER, S/N NA (A# 623) 

1 – TENNANT MODEL 510E BATTERY POWERED RIDER TYPE FLOOR SCRUBBER, S/N NA 

(A# 669) 

1 – TENNANT MODEL 800 LPG RIDER TYPE POWER FLOOR SWEEPER, S/N 800-2023, Enclosed 

Cab (A# 653A) 

1 – TENNANT MODEL 385 LPG RIDER TYPE POWER FLOOR SWEEPER, S/N 385-5631 (A# 624) 

TELESCOPIC BOOM 

AERIAL LIFT PLATFORMS 

1 – JLG MODEL 30HA ELECTRIC TELESCOPIC BOOM AERIAL 

LIFT PLATFORM, S/N 000093-0300016859, Articulated Boom, 30’ 

Max. Height, 500-Lb. Capacity, Pneumatic Tires (A# 616) 

IN-PLANT WELDER TRUCKS 

1 – UNITED MODEL 2500BEE ELECTRIC PLANT MAINTENANCE/ 

WELDING TRUCK, S/N ZA004 (2001), 6000 Lb. Capacity Single 

Passenger, 6’ Flatbed With, Miller Bobcat 225 NT CC/CV AC/DC 

Welder/Generator, S/N LA133348, 250 Amp Weld, 8000 Watt AC 

Power LPG Fuel (A# 702) 

1 – KALAMAZOO MODEL K-60A 4-WHEEL LPG PLANT WELDING 

TRUCK, S/N 28GG18, 6000 Lb. Capacity, 6’ Flatbed Hobart-Mega- 

Arc 4063-G Gas Powered Welder/Generator, S/N 84WSO5338, 

(A# 706) 

1 – UNITED MODEL 2500-B4L LPG PLANT MAINTENANCE VEHICLE, 

S/N 21-IL-64 (1993), 3000 Lb. Capacity Single Passenger, 6’ Flatbed 

With, Miller Big 20G Constant Current DC Welder/Generator, S/N KD 

467589, LPG Fuel Conversions (A# 708) 

For more information 

on how to bid online, visit 

www.hilcoind.com 

4 For more information, visit us on the web @ www.hilcoind.com

MATERIAL HANDLING VEHICLES • TOW TRACTORS • LIFTS • TRAILERS 

PETTIBONE MODEL 460-D LPG TOW TRACTORS 

CUSHMAN TITAN 3000 4-WHEEL ELECTRIC 

PERSONNEL/MATERIAL HANDLING VEHICLE 

A&G MERCURY LPG TOW TRACTOR 

MARMAX 20,000 LB. CAPACITY 

2 POST HYDRAULIC FORKLIFT/ 

VEHICLE SERVICE LIFT 

ROTARY SM122EL2-9 12000 LB. CAPACITY 4 POST 

HYDRAULIC AUTOMOTIVE SERVICE LIFT HOIST 

2003 

VIEW OF UTILITY MODEL TS2CDHE TANDEM AXLE 

SINGLE DROP FLATBED TRAILERS 

PLANT PERSONNEL & 

MATERIAL HANDLING VEHICLES 

1 – UNITED MODEL XRG-20 4-WHEEL LPG PLANT MAINTENANCE VEHICLE, 

S/N 37-ID-07, 2000 Lb. Capacity, Single Passenger, 6’ Flatbed (A# 710) 

1 – CUSHMAN MODEL TITAN 3000 4-WHEEL ELECTRIC PERSONNEL/ 

MATERIAL HANDLING VEHICLE, S/N 2168801, 2 Passenger, 6’ Flatbed (A# 843) 

1 – CUSHMAN MODEL COMMANDER 2100 4-WHEEL ELECTRIC 2 PASSENGER 

PERSONNEL AND MATERIAL HANDLING VEHICLE, S/N N/A (A# 807-CU) 

1 – TAYLOR DUNN MODEL B2-10 4-WHEEL ELECTRIC PLANT MAINTENANCE 

VEHICLE, S/N 149431, 2400 Lb. Capacity 2 Passenger, 6’ Flatbed, 36 Volt 

(A# 838) 

1 – KALAMAZOO 4-WHEEL LPG PLANT MAINTENANCE TRUCK, S/N N/A, 

Single Passenger, 6’ Flatbed (A# 709) 

1 – KALAMAZOO MODEL K60 4-WHEEL MAINTENANCE/ SERVICE VEHICLE, 

S/N 28GH15, 6000 Lb. Capacity Single Passenger, 6’ Flatbed Solid Tires 

(A# 705) 

TOW TRACTORS 

1 – A&G MERCURY LPG TOW TRACTOR, S/N AG1896, Enclosed Cab (A# 243A) 

2 – PETTIBONE MODEL 460-D LPG TOW TRACTORS, S/Ns N/A (A# 250/251) 

1 – PETTIBONE MERCURY MODEL 460-D LPG TOW TRACTOR, S/N 93-0376, 

3000 Lb. Drawbar Pull Solid Tires (A# 247) 


(A# 247) 


(A# 252) 

1 – CLARK MODEL CT-30 LPG TOW TRACTOR, S/N CT-56-5115, 3000 Lb. 

Drawbar Pull, Soft Side Cab (A# S244) 

1 – CLARK MODEL CT-30 3000 LB. CAPACITY LPG TOW TRACTOR, 

S/N CT-55-5115 

FORKLIFT BATTERY CHARGING STATION 

1 – FORKLIFT BATTERY CHARGING STATION, 100 Stations, 2 Lane, R&L Side 

Charging Stands, (2) Floor Track Riding Multi-Shifter Power Charging Cars With, (84) 

Hobart, Deleg, Staticon Industrial Battery Chargers (Col. #OFF-1) 

FORKLIFT/VEHICLE SERVICE LIFTS 

1 – MARMAX 20,000 LB. CAPACITY 2 POST HYDRAULIC FORKLIFT/VEHICLE 

SERVICE LIFT, S/N M-1572, Floor Standing, Drive-On Type, External Hydraulic Unit 

(A# G-32) 

1 – 20,000 LB. CAPACITY 2 POST HYDRAULIC FORLIFT/VEHICLE SERVICE LIFT, 

MFG’R AND S/N N/A, Drive-On Type, External Hydraulic Unit (Col. #OFF-1) 

AUTOMOTIVE SERVICE LIFTS 

1 – ROTARY MODEL SM122EL2-9 12000 LB. CAPACITY 4 POST HYDRAULIC 

AUTOMOTIVE SERVICE LIFT HOIST, S/N NEB95 D0045, (FEU Bldg.) 

1 – ROTARY MODEL SM123-10 12000 LB. CAPACITY 4 POST HYDRAULIC 

AUTOMOTIVE SERVICE LIFT HOIST, S/N SEG01 B0008, (FEU Bldg.) 

1 – GILBARCO MODEL AHF22D10AO100 8000 LB. CAPACITY SWING RAIL 

TWO-POST FLOOR STANDING HYDRAULIC AUTOMOTIVE SERVICE LIFT 

HOIST, S/N N/A, (Lease Car Garage) 

VEHICLE ALIGNMENT RACK 

1 – HUNTER MODEL DSP400 ALIGNMENT SYSTEM, S/N N/A, Floor Standing 4-Post 

Drive on Hydraulic Ramp, Model L421-DRE-14K, S/N 233-23-1-DRE (PC Control 

Cabinet) 

TIRE & DOOR PANEL SEMI TRAILERS 

4 – UTILITY MODEL TS2CDHE TANDEM AXLE SINGLE DROP FLATBED TRAILERS, 

VINs: 1UYTS25354A174301, 1UYTS25374A174302, 1UYTS25304A174304, 

1UYTS25394A174303 (All 2003), 65000 Lb. GVWR Air Ride, Utility Tautliner 

Curtainside With, Swing Doors, Custom Interior Conveyorized Racking System for 

Tires/Seats 


STORAGE & RETRIEVAL SYSTEMS • AIR COMPRESSORS & DRYERS 

HANEL STORAGE SYSTEMS LEAN 

LIFT 1300-825 POWER STORAGE 

& RETRIEVAL SYSTEMS 

JOY MODEL TURBO AIR 28 600-HP 

CENTRIFUGAL AIR COMPRESSOR 

500 LB. FREE STANDING 

HOIST STRUCTURE 

1000 LB. HOIST SYSTEM 

PORTABLE PLANT MAINTENANCE 

AIR COMPRESSORS 

2 – PORTABLE AIR COMPRESSOR RIGS, Champion Two-Stage Horizontal 

Tank mounted, Kohler Magnum 10, 10-HP Gas Engine, Mounted on 4’ x 8’ 

Flatbed Utility trailer With, Toolbox and Hose Reel 

HYDRAULIC BALERS 

7 – SELCO MODEL VS-6M VERTICAL HYDRAULIC BALERS, S/Ns 07893832, 

36” x 72” Chamber, Floor Standing Top Mounted Hydraulics, S/Ns 07893838, 

11872019, 039664300, 07893834, 11872095, 019865919 

STORAGE AND RETRIEVAL SYSTEMS 

3 – HANEL STORAGE SYSTEMS MODEL LEAN LIFT 1300-825 POWER 

STORAGE AND RETRIEVAL SYSTEMS, S/Ns 226-495-1, 226-495-2, 226- 

495-3 (2005), Vertical Carousel Type, 66,150 Lbs. Maximum Total Load, 1103 

Lbs. Per Container, 52” x 32” Slide-Out Trays, Overall Dimensions 56”W x 10’ 

D x 22’H, MP-12D Microprocessor Control System (General Stores) 

2 – HANEL STORAGE SYSTEMS MODEL ROTOMAT 985 POWER STORAGE 

AND RETRIEVAL SYSTEMS, S/Ns 224-993, 221-446, Vertical Carousel File 

Type, 25,785 Lbs. Maximum total Load, 836 Lbs. Per Carrier, Overall 

Dimensions 11 1/2’ W x 6’ D x 22’H, Programmable Keypad (General Stores) 


AND RETRIEVAL SYSTEM, S/N 64.320/2-2 (1995), Vertical Carousel File 

Type, 27,449 Lbs. Maximum Total Load, 855 Lbs. Per Carrier, Overall 

Dimensions 11 1/2’W x 6’ x 22’H, Programmable Keypad (General Stores) 


AND RETRIEVAL SYSTEM, S/N 64516 (1995), 28,308 Lbs. Maximum Total 

Load, 1,048 Lbs. Per Carrier, Vertical Carousel File Type, Overall Dimensions 

11 1/2’ W x 6’D x 22’H, Programmable Keypad (General Stores) 

1 – HANEL MODEL ROTOMAT 985 POWER STORAGE AND RETRIEVAL 

SYSTEM, S/N 69-320/1-2 (1998), Vertical Carousel File Type, 23,647 Lbs. 

Total Load Capacity, 231 Lb. Maximum Load Per Drawer Carrier, Overall 

Dimensions 12’W x 6’D x 18’H, Programmable Keypad (Col. #OFF-3) 

1 – HANEL MODEL ROTOMAT 390 POWER RETRIEVAL AND STORAGE 

SYSTEM, S/N 122-154/2-2, Maximum Total Load 10,231 Lbs. Maximum 

Load Per Carrier 512 Lbs. Vertical Carousel Type, Overall Dimensions 11 1/2’ 

W x 6’D x 16’H, Programmable Keypad 

1 – HANEL MODEL ROTOMAT 7-600 OFFICE FILE STORAGE AND 

RETRIEVAL SYSTEM, S/N 65592/2-2 (1996), Maximum Load Per Carrier 

276 Lbs., Programmable Keypad 40”W x 18” Deep 3 Compartment File 

Drawers 12 Levels (Personnel Office) 

AIR COMPRESSORS AND DRYERS 

1 – JOY MODEL TURBO AIR 28 600-HP CENTRIFUGAL AIR COMPRESSOR, 

S/N F10112, Water Cooled, 110 PSIG, Sound Enclosure Panels, Bay 

Controls Pro Tech Microprocessor Controls (West Paint Compressor Room) 

1 – ATLAS COPCO MODEL ZR5B 450-HP ROTARY SCREW AIR 

COMPRESSOR, S/N 484528, 2000 SCFM, Water Cooled, Sound Enclosure 

Panels, Bay Controls Pro tech Microprocessor Controls With, Model MD5 Oil 

Free Air Dryer S/N 2R51B (Power House) 

1 – INGERSOLL-RAND T30 MODEL 242-5D 5-HP 2-STAGE VERTICAL TANK 

MOUNTED AIR COMPRESSOR, S/N 30T-723611, With, Hydro Guard Dryer 

(West Paint Comp. Room) 

1 – CHAMPION MODEL VRT-12 5-HP TWO-STAGE VERTICAL TANK 

MOUNTED AIR COMPRESSOR, S/N 0086-83 (FEU Bldg – Outside) 

1 – INGERSOLL-RAND MODEL F825-8P REFRIGERATED COMPRESSED 

AIR DRYER, S/N 914F292, Water Cooled (Paint Comp Room) 

1 – ZURN COMPRESSED AIR/GAS DRYER, MODEL AND S/N N/A, 3200 

SCFM Capacity Coalescing and Particulate Filters (Paint Kitchen) 

CRANES AND HOISTS 

1 – P&H 5-TON 40’ SPAN BOTTOM RIDING SINGLE GIRDER BRIDGE CRANE, 

S/N CD-34022-GG, 6-Way Power Travel With, Pendant Control (Body Shop – QC Room) 

1 – P&H 5-TON 40’ SPAN BOTTOM RIDING SINGLE GIRDER BRIDGE CRANE, 

S/N CD-34023-GG, 6-Way Power Travel With, Pendant Control (Body Shop – QC Room) 

1 – UNIFIED 2-TON X 20’ BOTTOM RIDING SINGLE GIRDER BRIDGE CRANE, Yale 2-Ton 

Electric Cable Hoist, 6-Way Power Travel With, Pendant Control 45’ Suspended Runway 

Rails (Body Shop Col. #E-13-B) 

1 – ACCO/LOUDEN 2-TON X APPROX 20’ SPAN BOTTOM RIDING SINGLE GIRDER 

BRIDGE CRANE, Pneumatic Power Bridge Travel, Budgit 2-Ton Electric Chain Hoist (Col. 

# OFF-2-4) 

1 – ACCO/LOUDEN 1-TON X APPROX 20’ SPAN BOTTOM RIDING SINGLE GIRDER 

BRIDGE CRANE, Manual Travels, Budgit 1-Ton Electric Hoist (Col.# OFF-2-4) 

1 – ACCO/LOUDEN 1-TON X APPROX. 20’ SPAN BOTTOM RIDING SINGLE GIRDER 

BRIDGE CRANE, Budgit 1-Ton Electric Chain Hoist, Pneumatic Power Bridge Travel 

(Col.# OFF-2-4) 

1 – 60’ SUSPENDED CRANE RUNWAY, With 3-Strand AC Power Hot Track (Col. # OFF-2-4) 

1 – HOIST SYSTEM INCLUDING: 

• (1) Unified 1-Ton x 40’ Span Bottom Riding Single Girder Bridge Crane, Budgit 1-Ton 

Electric Chain Hoist, 6-Way Power Travel With, Pendant Control (1)-Ton Single Girder 

Bridge (No Hoist) Approx 90’ 3-Strand Suspended Runway Rails (Central Area 

Maintenance #KK-23) 

1 – 1000 LB. HOIST SYSTEM, Easy Slide Style, 10’ Span, Ingersoll-Rand 1-Ton Pneumatic 

Hoist, Approx. 50’ Suspended Runway (Paint Kitchen Mix Room) 

1 – 1/2 Ton x @ 12’ SPAN BOTTOM RIDING SINGLE GIRDER BRIDGE CRANE, Budgit 1/2 

Ton Electric Hoist, 6-Way Power Travel With, Pendant Control 75’ Suspended Runway 

(Central Area Maintenance #KK-22 

1 – 1/2 TON HOIST SYSTEM, 12’ Bottom Riding Single Girder Bridge, Budgit 1/2 Ton Electric 

Chain Hoist, Manual Travels, 18’ Suspended Runway (Body Shop Toolroom #T-04-B 

1 – GORBEL 4000 LB. CAPACITY FREE STANDING HOIST SYSTEM, 4 Post Support 

Structure 16’ x 24’ 10 1/2’ Clear Height, With ARO 2-Ton Pneumatic Chain Hoist, Manual 

Travels ( Col.# G-2) 

1 – FREE STANDING HOIST SYSTEM, 4 Post Support Structure Approx. 24’ x 24’, Unified 

Easy Flow Track System, (3) Support Runner Rails, (1) Cross Rail Bridge, 2000 Lb. 

Capacity With, Zimmerman Z-Brake Pneumatic Balancer (FEU Bldg.) (P 151, 152) 

1 – FREE STANDING HOIST SYSTEM, 4 Post Support Structure Approx. 24’ x 24’, Unified 

Easy Flow Track System, (3) Support Runner Rails, (1) Cross Rail Bridge, 2000 Lb. 

Capacity With, Zimmerman Z-Brake Pneumatic Balancer (FEU Bldg.) (P 151, 152) 

1 – FREE STANDING HOIST SYSTEM INCLUDING: 

• (1) Unified 1000 Lb. x 15’ Span Bottom Riding Single Girder Bridge Crane Yale Electric 

Chain Hoist, Manual Travel (1) Unified 4000 Lb. x 15’ Span Yale 2-Ton Electric Cable 

Hoist, Manual Travel (1) Approx. 55’ Free Standing Runway (Material Handling Repair) 

1 – FREE STANDING HOIST SYSTEM INCLUDING: 

• (1) Unified 1000 Lb. x 12’ Span Bottom Riding Single Girder Bridge Crane, Yale Electric 

Chain Hoist, Manual Travel (1) Unified 4000 Lb. x 12’ Span Bottom Riding Single Girder 

Bridge Crane, Yale 2-Ton Electric Cable Hoist, Manual Travel (1) Approx. 40’ Free 

Standing Runway (Material Handling Repair) 

1 – 1/2 TON FREE STANDING HOIST SYSTEM, ACCO/Louden 20’ Span Bottom Riding 

Single Girder Bridge, Budgit 1/2 Ton Electric Chain Hoist, 40’ 8 Post Free Standing 

Support Structure (Col.# JJ-24-7) 

1 – 1000 LB. FREE STANDING HOIST SYSTEM, 4 Post Free Standing Structure Approx. 15’ 

x 20’ Unified 1/4 Ton Easy Flow Rail, ARO 1/2 Ton Pneumatic Air Hoist (Col.# JJ-24-7) 

1 – 500 LB. FREE STANDING HOIST STRUCTURE, 11’ x 22’ x 19’ High, Stationary Monorail 

With, Zimmerman E-Z Slide Type Balancer (Body Shop Col. # B-12-B) 

1 – GORBEL 250 LB. CAPACITY 180’ FREE STANDING JIB CRANE, With ARO 1/4 Ton 

Pneumatic Air Hoist ( Outside – FEU Bldg.) 

1 – SHAW BOX LIFT TECH 2-TON ELECTRIC CABLE HOIST, Power Trolley, 

4-Way Pendant Control (Body Shop Col.# H-14-B) 

1 – ARO 1/4 TON PNEUMATIC HOIST, With, I Beam Monorail (West Paint Toolmaker’s Maint.) 

6 For more information, visit us on the web @ www.hilcoind.com

PAINT BOOTH/OVEN • PAINT LINE SYSTEM SUPPORT • BOILERS 

H.M. WHITE SPRAY BOOTH/OVEN 

FANUC MODEL P-200-E 6-AXIS CNC PAINT ROBOTS, 

FLOOR TRACK RIDING TRAVEL SYSTEM 

BULK TOTE CONTAINER PAINT MIXERS 

PAINT BOOTH/OVEN 

1 – H.M. WHITE SPRAY BOOTH/OVEN, 2-Section, 70’ Overall Length, (2) 35’ Sections, 

Down Draft Exhaust, Double End Drive Through Doors, Bolted Steel Panels Top Fed 

Forced Hot Air (Paint Bldg. #T6 North End) 

PAINT LINE SYSTEMS SUPPORT EQUIPMENT 

13 – FANUC MODEL P-200-E 6-AXIS CNC PAINT ROBOTS, FLOOR TRACK RIDING 

TRAVEL SYSTEM, RJ2 CONTROLS, (2002) S/Ns M2000889, M2000888, 

M2000886, M2000807, N/A, M2001106, M2001105, M2000050, M2001098, 

M2001100, M2000653, M2001097, M2001099, (West Paint – Upstairs) 

1 – (4) SETS PASS THROUGH FEATHER DUSTERS, Model and S/N N/A, R,L, and 

Top Ionized Ostrich Feathers (West Paint – Upstairs) 

2 – BULK TOTE CONTAINER PAINT MIXERS, (Paint Kitchen) 

1 – MARK ONE 55 GALLON DRIVEN RUBBER TIRED PAINT DRUM MIXER 

(Paint Kitchen) 

2 – TYPE FSP-4000-304S.S STAINLESS STEEL FILTER POTS, S/Ns 31817, N/A 100 

PSIG @ 140 Degrees Fahrenheit 

4 – TYPE FSP-3500-304 S.S STAINLESS STEEL FILTER POTS, S/Ns 31814, 31813, 

31812, 31811, 100 PSIG @ 140 Degrees Fahrenheit 

8 – TYPE FSP-3000-304 S.S. STAINLESS STEEL FILTER POTS, S/Ns 31826, 31825, 

31829, 31828, 31135, 31133, 31136, 31134, 100 PSIG @ 140 Degrees Fahrenheit 


100 PSIG @ 140 Degrees Fahrenheit 


100 PSIG @ 140 Degrees Fahrenheit ( E-Coat Upstairs) 

1 – ITS VERTICAL FILTER PRESS, MODEL AND S/N N/A, 46” x 46” Filter Membrane, 

Hydraulics, Controls, Allen Bradley SLC-5/02 CPU PLC (E-Coat Upstairs) 

LOT – PAINT KITCHEN INCLUDING: 

• (16) 75 Gallon Stainless Steel Pain Mixing Tanks With Mixers, (36) 250 Gallon 

Stainless Steel Paint Mixing Tanks With Mixers, (12) 600 Gallon Stainless Steel 

Paint Mixing Tanks With Mixers 

PLATE TYPE HEAT EXCHANGERS, Various Manufactures and Sizes (E-Coat Upstairs) 

For more information on how to bid online, visit 


GOULDS MODEL VIT-CT 150-HP 

VERTICAL SHAFT PUMPS 

CLEAVER BROOKS CB-700-700 700-HP NATURAL 

GAS FIRED PACKAGED STEAM BOILERS 

VIEW OF TYPE 

FSP-3500-304 

S.S STAINLESS 

STEEL FILTER 

POTS 

VERTICAL SHAFT PUMPS 

3 – GOULDS MODEL VIT-CT 150-HP VERTICAL SHAFT PUMPS, S/Ns 444335-3, 

444335-2, 444335-1, 1500 GPM, 280 TDH, Size 14RJMC (Body Shop Col.# J-14-B) 

(A#s 4, 5 & 6) 

3 – PROCESS SYSTEMS THRUST HEAD MODEL 2-14M-150 100 HP VERTICAL 

SHAFT PUMPS, S/Ns G05-WRR22442, G05-WRR22463, G05-WRR22482, 1500 

GPM, 200 TDH (Body Shop Col. # H-14-B) (A#s 1, 2,&3) 

2 – 15-HP VERTICAL SHAFT PUMPS, MFG’R N/A (Body Shop # H-14-B) (A#s 4&5) 

(P 7,8) 

BOILERS 

2 – CLEAVER BROOKS MODEL CB-700-700 700-HP NATURAL GAS FIRED 

PACKAGED STEAM BOILERS, S/Ns L-92358, L-92359 (1993), Input 29, 291,000 

BTU/Hr. Maximum Pressure 30# HW (Hot Water), 23,432 BTU/Hr. Hot Water 

Output, Dry Weight 50,600 Lbs, Boiler Clearances: Front Door Davited 9’ 1” Rear 

Door Davited 4’ 5”, Side Entry 3’ 7” (E-Coat Upstairs) (P 260, 261, 262) 

CHILLERS 

2 – YORK CODE PAK MODEL YT-B1-B1-B2-CG-A CHILLERS, S/Ns YCRM-047484, 

YCRM-047485, 100-HP, 2-Pass, Refrigerant DWP 15 PSIG, Liquid DWP 150 

PSIG, Model YTJ-76 Compressor (E-Coat Upstairs) (P 276, 277) 


Atlanta • Birmingham • Boston • Charlotte • Chicago • Dallas • Detroit • Grand Rapids • Guadalajara (MX) • Hong Kong • Irapuato (MX) • Leeds (UK) 

London (UK) • Los Angeles • Mexico City (MX) • Monterrey (MX) • New York • San Francisco • Southampton (UK) • Toronto • Villahermosa (MX) 

Hilco Industrial, LLC 

Auctioneers • Liquidators • Appraisers 

Headquarters 

31555 W. Fourteen Mile Road, Suite 207 

Farmington Hills, MI 48334 

Ph: 248.254.9999 

Fx: 248.254.9995 


Presorted 

First Class Mail 

U.S. Postage 

PAID 

Detroit, Mich. 

Permit No. 100 

Forwarding Service Requested 


Due to plant decomissioning, assets no longer required by 

Toolroom, Material Handling, 

Plant Support & Mobile Equipment 

Online Bidding Starts: Tuesday, June 23rd at 10am ET 

Online Bidding Ends: Tuesday, June 30th 

Assets Located In Norfolk, Virginia 

HILCO Industrial, LLC is a division of Hilco Trading, Co. • Headquarters 5 Revere Drive, Ste. 430 • Northbrook, IL 60062 

All rights reserved • Printed in USA • FORD3250 • IL License #444000215 

Please visit our website at www.hilcoind.com to review our complete terms and conditions. 

Terms of Sale 

A buyer’s premium of 16% will be in effect. 

Everything will be sold to the highest bidder for cash 

at this online auction, in accordance with the 

Auctioneer’s customary “Terms of Sale”, copies of 

which will be the website at www.hilcoind.com. All 

items will be sold “as is, where-is” without any 

warranties, express or implied. Although obtained 

from sources deemed reliable, the Auctioneer makes 

no warranty or guarantee to the accuracy of the 

information herein contained. Bidders are 

encouraged to thoroughly inspect the items on which 

they intend to bid prior to sale. Absolutely no items 

will be removed until payment is made in full. Please 

visit www.hilcoind.com for the removal dates and 

times. Subject to additions, deletions and prior sale. 

Payment: ALL PURCHASES MUST BE PAID IN 

FULL ON THE DAY OF THE AUCTION. If you intend 

to pay by wire transfer, we will accept payment the 

day after the sale ONLY IF a deposit of 25% of total 

purchases is made on the day of the sale. Contact 

our office for wire transfer instructions. Only cash, 

wire transfer or certified check, payable to Hilco 

Industrial, LLC will be accepted. Company checks 

payable to Hilco Industrial LLC will be accepted only 

if accompanied by a bank letter of guarantee, (see 

sample letter below). All sales are subject to sales 

tax. Purchasers claiming exemptions from taxes 

must provide proof satisfactory to the Auctioneer of 

their entitlement to claim such exemptions. 

Sample Bank Letter 

(Bank Name) unconditionally guarantees 

payment to Hilco Industrial, LLC from 

(Company Name). This guarantee will be valid 

for purchases made at the Auction of Ford 

Norfolk on June 30th.

Download Brochure - Hilco Industrial

Create successful ePaper yourself

Delete template?

Save as template?