Download Brochure - Hilco Industrial

hilcoind.com

Download Brochure - Hilco Industrial

Hilco Industrial, LLC & Maynards Industries

WebCast/OnsIte auCtIOn

Old Carco Liquidation Trust

owner of assets formerly owned by

Chrysler LLC

Auctioneers • LiquidAtors • ApprAisers

21700 Northwestern Hwy • Suite 1180

Southfield, Michigan 48075-4923

Ph 248.569.9781 • Fx 248.569.9793

www.maynards.com

Hilco Industrial, LLC

A u c t i o n e e r s • L i q u i d a t o r s • A p p r a i s e r s

31555 West Fourteen Mile Road, Suite 207

Farmington Hills, Michigan 48334

Ph 877.37.HILCO (44526) • Fx 248.254.9995

www.hilcoind.com


HILCO InDustrIaL, LLC WebCast/OnsIte auCtIOn

Old Carco Liquidation Trust

owner of assets formerly owned by

Chrysler LLC

auCtIOn Dates

tuesDay, June 21 st tHrOugH

tHursDay, June 23 rD

at 10aM LOCaL tIMe eaCH Day

PrevIeW Date

MOnDay, June 20 tH

9aM tO 4PM LOCaL & MOrnIng Of saLe

For earlier inspection, please contact ken planet

at 248.254.9999 x33 or email kplanet@hilcoind.com

auCtIOn & PrevIeW LOCatIOn

6700 LynCH rOaD

DetrOIt, MI 48234

DIreCtIOns

frOM DetrOIt MetrOPOLItan aIrPOrt: exIt aIrPOrt by HeaDIng sOutHWest

anD COntInue straIgHt OntO JOHn D DIngeLL Dr. gO 1.3 MILes anD COntInue OntO

W g rOgeLL Dr. Merge OntO I-94 e vIa tHe raMP tO DetrOIt. PrOCeeD fOr 20.3 MILes

anD take exIt 218 tOWarD M-53/van Dyke ave. Merge OntO eDseL fOrD e. turn Left

OntO van Dyke ave anD gO 1.4 MILes anD turn Left OntO LynCH rD. DestInatIOn

WILL be On tHe Left. WatCH fOr auCtIOn sIgns anD ParkIng.

furtHer InfOrMatIOn

• a buyers PreMIuM Of 13.5% fOr aLL OnsIte saLes & 16% fOr aLL WebCast saLes WILL be In effeCt.

auCtIOn WILL be COnDuCteD In engLIsH, aCCePtIng u.s. CurrenCy OnLy.

• bIDDers IntenDIng On attenDIng In PersOn Must regIster On sIte befOre tHe auCtIOn.

• Removal foR hand caRRy / small items not RequiRing heavy Rigging equipment & disassembly will

occuR on June 24 & June 27 tHru July 1, 2011. Removal foR laRgeR items RequiRing heavy Rigging

equipment & disassembly begins July 5, 2011. the Removal deadline foR all equipment is Friday,

august 26, 2011, standaRd Removal times 8am to 4pm monday thRu fRiday. afteR the noted

deadline at 4pm the equipment will be deemed abandoned and payment will not be Refunded.

• RiggeR of choice pRovided that pRopeR pRoof of insuRance and safety

RequiRements aRe met and subject to detailed site cleaRance pRoceduRes.

• fOr furtHer InfOrMatIOn On MaCHInery & equIPMent, PLease COntaCt

ken PLanet at 248.254.9999 x33 Or eMaIL kPLanet@HILCOInD.COM

• fOr PayMents PLease COntaCt LesIa JOsePH at 616.732.1800 x19 Or eMaIL LJOsePH@HILCOInD.COM

Or HILCO aCCOunts reCeIveabLe at HIn_ar@HILCOInD.COM

• CustOMer servICe, PLease COntaCt sanDI neeLy at 248.254.9999 x16 Or eMaIL

sneeLy@HILCOInD.COM

(45) CNC GEAR CUTTING MACHINES

1 – KLINGELNBERG MODEL C27 CNC GEAR CUTTING MACHINES, S/N 291664 (2005),

Fanuc 160i-MB Control, Max Gear Diameter 10.63”, Module Range .059” – .256”, Pneumatic

Hoist, Parts Conveyor, S/N 291665 with Spiess Jib Crane

4 – GLEASON MODEL PHOENIX II 275HC CNC HYPOID CUTTING MACHINES, S/Ns 963815,

963817, 963814, 963816 (All 2003), GE Fanuc 160i-MB Control, Full Depth Max .787”,

Face Width Max 2.3”, Extreme Ratio 10:1, Root Angle Range -5 to 90 deg, Coolant System,

Mist Collector

38 – GLEASON MODEL PHOENIX 175HC CNC HYPOID CUTTING MACHINES,

(NEW AS 2001), S/Ns 948302, 945303, 945307, 945308, 945309, 946010, 945306,

946009, 945310, 937407, 936203, 937406, 936206, 936202, 928404, 930703, 928405, 925111,

926810, 926812, 926811, 922711, 924002, 926809, 921416, (13) NA, GE Fanuc

160i-M Control, Face Width Max 1.6”, Extreme Ratio 10:1, Root Angle Range (B-Axis) -5 deg

to 90 deg, Coolant System, Mist Collector, Machine #5, Pneumatic Hoist, Parts Conveyor

2003

2005

2003

CNC GEAR CHAMFERING MACHINE

1 – GLEASON MODEL GTR 250 VG CNC GEAR CHAMFERING

MACHINE, S/N GTR292 (2000), Built by Okamoto – Unused

/ On OEM Factory Skid (Missing Controls)

MISC GEAR CUTTING EQUIPMENT

Over 200 – CUTTER BODIES

1 – GLEASON 5-AXIS CUTTER BUILD UP DEVICE,

S/N 930301 (1998), Diameter 3.25” – 18” Face Milling,

Spindle Nose Taper 2.92”, C&Z Axis Servo Driven

3 – GLEASON EDGE CONDITIONERS, S/Ns N/A, Aercology

Model DMH 500 Dust Collector

QUANTITY OF GEAR ARBORS, PINION ARBORS, FACE PLATES

2

to schedule an auction, please call Hilco Industrial, LLC at 1.877.37.HILCO (44526)


CnC gear testIng & LaPPIng MaCHInes

(18) CNC GEAR TESTING MACHINES

2 – GLEASON MODEL 600 HTT TURBO CNC HYPOID GEAR TESTERS, S/Ns 966806, 966801 (Both 2004),

Fanuc 160i-M Control, Max Gear OD 23.63”, Max Pinion OD 10”, Max Speed 3,000 RPM, Offset Range +/- 3”,

Koolant Model JT1000GLE Chiller

3 – OERLIKON/KLINGELNBERG MODEL T60 CNC GEAR TESTERS, S/Ns 292510, 292511 (Both 2002),

S/N 292538 (2005), Fanuc 160i M Control, Max Gear Diameter 19.69”, Speed Range 0-5000 U/Min

9 – OERLIKON/KLINGELNBERG MODEL T50 CNC GEAR TESTERS, (NEW AS 2001), S/Ns 291540, 291526,

291511, 291504, 289584, 289576, 289577, 289555, 289583,Fanuc 160i M Control, Max Gear Diameter 19.69”,

Pinion Headstock (Z-Axis) 7.88”, Gear Headstock (Y-Axis) 7.88”, Hypoid Shift (X-Axis) +/- 2.76”, Shaft Angle 90

Degrees, S/Ns 291540 & 291511 with Rotec Computer & Monitor, S/N 291540 with Compound Spray System

3 – OERLIKON MODEL T22 CNC GEAR TESTERS, S/Ns 289569, 289551, 289552 (1998), Fanuc Control,

Max Gear Diameter 19.69”, Pinion Headstock (Z-Axis) 7.88”, Gear Headstock (Y-Axis) 7.88” Hypoid Shift

(X-Axis) +/- 2.76”, Shaft Angle 90 Degrees, S/N 289552 Rotec Computer & Monitor, Compound Spray Pump,

S/N 289551 with Compound Spray Pump

1 – OERLIKON MODEL SPIROMAT T22 CNC GEAR TESTER, S/N 289553 (1997), Fanuc Control, Max Gear

Diameter 19.69”

1 – GLEASON MAHR MODEL GMX 275 GEAR TESTER, S/N 1102, Best Nr 5441103, Max OD 10.83”

1 – GLEASON MODEL 17A GEAR TESTER, S/N 32437 (2002)

1 – GLEASON ARBOR CHECKING FIXTURE, S/N 957501

1 – GLEASON MODEL 15 BEVEL GEAR BLANK CHECKER, S/N 637804, Face Angle/Back Angle Adjustment

3 – GLEASON MODEL 502 HYPOID TESTERS, S/Ns 652402, 641612, 634817

(37) CNC GEAR LAPPING MACHINES

6 – GLEASON MODEL 600 HTL TURBO CNC HYPOID

TURBO GEAR LAPPERS, S/Ns 966701, 966702 966703,

966705, 966710, 966704 (All 2004), Fanuc 160i-MB

Control, Max Gear OD 23.63”, Max Pinion OD 10”, Max

Speed 3,000 RPM, Offset Range +/- 3”, DLB Pump Station

5 – KLINGELNBERG / OERLIKON MODEL L60 CNC GEAR

LAPPERS, S/N 293440 (2005), S/Ns 292480, 292479,

292477, 292478 (All 2002), GE Fanuc 160i-M Control,

Max Gear Diameter 19.68” Approx, Motor & Brodel Pump

2 – LIEBHERR MODEL LP200 LX GANTRY

LOAD/UNLOAD UNITS, GE Fanuc PowerMate Control,

Gantry Length 35’ Approx

8 – OERLIKON MODEL L50 CNC GEAR LAPPERS,

S/Ns 292407, 292409, 292405, 292404, 292420, 292421,

292424, 292423 (All 2000), N/A, with GE Fanuc 160i-M

Control, Compound Pump

6 – OERLIKON MODEL L50 CNC GEAR LAPPERS,

S/Ns 289441R, 291466, 291472, 291471, 291459,

291460 (All 1998), Fanuc 16-M Control, Compound

Pump, (4) with Parts Conveyor

12– OERLIKON MODEL L22 CNC GEAR LAPPERS,

S/Ns 291434, 291437, 291433, 291441, 291438 (All 1997),

S/Ns 291410, 291411, 291401, 289494, 291405, 291404,

291403 (All 1996), Fanuc 16-M Control, Compound Pump

COMPOUND PUMP SYSTEMS

2 – DAVID L BOWERS THREE TOTE STORAGE &

PUMPING SYSTEMS (Both 2006), Magelis Terminal,

(1) with Motor & Bredel Pump

1 – LAP COMPOUND PUMPING SYSTEM, Magelis Control,

7.5 HP Motor, Bredel Pump

2002

2004

2002

to schedule an auction, please call Maynards Industries at 248.569.9781 3


CnC gear MaCHInery • eDM • autOMatIC straIgHtenIng Presses

(3) CNC GEAR MEASURING CENTERS

1 – KLINGELNBERG MODEL P40 CNC GEAR MEASURING

CENTER, S/N B5484 (2005), Module Range .02” – .59”, Max

Gear OD 15.75”, Vertical Measuring Range 21.66”, Min/Max

Helix or Lead Angle 90 Degrees, Center Distance .59” – 31.5”,

Dell PC, HP Printer, Monitor

2 – KLINGELNBERG MODEL P26 CNC GEAR MEASURING

CENTERS, S/Ns B5772, B5773 (Both 2005), Module Range

.02” – .48”, Max Gear OD 10.24”, Vertical Measuring Range

15.75”, Min/Max Helix or Lead Angle 90 Degrees, Center

Distance .59” – 23.63”, Computer & Printer

CNC CUTTER SHARPENING MACHINES

9 – GLEASON MODEL 300-CG 5-AXIS CNC CUTTER SHARPENING

MACHINES, (NEW AS 1999), S/Ns 948202, 948201, 933101,

933001, 931801, 931701, 925701, 920301, 914401, Fanuc

Control, Travels: A – 360 Deg Rollover, C – +30 / – 180

Degrees; X – 12”, Y – 12”, Z – 12”; Grinding Wheel Capacity

12”, 10 HP Grinding Spindle, Spindle Speeds 2,000 – 4,000

RPM, Auto Stacker & Shuttle, Fanuc Robot Loaders

2005

CNC GRINDERS / FACE MILLS

1 – LANDIS MODEL 3SEH CNC 30 DEGREE CNC ANGLE

GRINDER, S/N LT-90872 (2002), GE Fanuc Series 18i-T

Control, Model SB-4500 SBS Balance Sys Monitor, Control

Gaging 902 Monitor, Gantry Load Arm, Turmoil Model OC-300

Cooler, Chip Conveyor, Monroe Environmental Oil Mist

Collector

1 – SAGINAW MACHINE MODEL 1-25G CHALLENGER CNC

VERTICAL FACE GRINDER, S/N 79384-07/03, GE Fanuc

Series 180iT Control, Turmoil Model CCO-200 R-2CIR Cooler,

Monroe Environmental Oil Mist Collector, Mayfran Coolant Pump

1 – SAGINAW MACHINE MODEL HDE 8x4 CNC FACE &

CENTER MILL, S/N 79374, GE Fanuc 180i-T Control, Dual

Cutter Heads, Chip Conveyor, Creative Automation Gantry

Loader, Monroe Environmental OMC-007-01

CNC TOOL & CUTTER GRINDERS

1 – STAR MODEL ATG-6AC CNC TOOL & CUTTER GRINDER,

S/N 2987

2005

2002

EDM

1 – MITSUBISHI MODEL FA10SM WIRE EDM, S/N 0501S206

(2005), Machining Range: X – 13.8”, Y – 9.8”; Max Z-Axis Height

8.6”, Max Submerged Workpiece Dimensions 31.5” x 23.6” x 8.5”,

AUTOMATIC STRAIGHTENING PRESSES

5 – EITEL MODEL ASP40 40 TON AUTOMATIC FLEX

STRAIGHTENING PRESSES, Xycom Terminal, Auto

Load/Unload, S/N 25819R (1997, Retooled 2004), QASS.Net

Crack Detector, S/N 25955 (2001), Wolter Crack Detector,

Allen Bradley 1394 Digital Servo Controller, Hydraulic Unit

Disassembled, S/N 25817, 25818, 25819 (All 1997), Wolter

Crack Detector – Console Control w/Allen Bradley 550

Panelview, Auto Load/Unload

1 – EITEL MODEL AMS-40-1300 40 TON AUTOMATIC

ELECTROMECHANICAL STRAIGHTENING PRESS, S/N

26002 (2002), Xycom Terminal, Between Columns 35”,

QASS.Net Crack Detection Sensor

4

for more information, please visit us on the web at www.hilcoind.com


CnC vertICaL turnIng Centers • CnC MaCHInIng Centers

(21) CNC VERTICAL TURNING CENTERS

2 – SAGINAW MACHINE MODEL AC-300-1 CNC VERTICAL TURNING

CENTERS, S/Ns 79376, 79375-06/03 (Both 2003), GE Fanuc 180i-T Control,

Max Swing 16”, Max Turn Diameter 16”, Max Turn Height 14”, 12 Position

Turret, Chip Conveyor

1 – CREATIVE AUTOMATION OVERHEAD CONVEYOR, S/N 79380, GE Fanuc

Powermate Control, Overhead Loader/Unloader

4 – KASPER MACHINE CO MODEL VCNC-400 4-AXIS CNC TWIN SPINDLE

VERTICAL TURNING CENTERS, S/Ns VCNC-402M0079, VCNC-402M0185,

VCNC-402M0077, VCNC402M0078, GE Fanuc Series 16i-T Control, Max

Swing 27” Approx, Spindle Center Distance 34” Approx, Slides: Vertical (Z)

Travel 18”, Cross Slide (X) Travel 12”, Chip Conveyor, Motor & Hydraulic

Power Unit, S/Ns VCNC-402M0079, VCNC-402M0185 with Dual Motor &

Hydraulic Power Unit

8 – KASPER MACHINE CO MODEL VCNC-400 4-AXIS CNC TWIN SPINDLE

VERTICAL TURNING CENTERS, S/Ns VCNC-402M9650, VCNC-N/A,

VCNC402M9003, VCNC402M9302, VCNC402M9752, VCNC402GM9761,

VCNC402M9866, VCNC402M9866, GE Fanuc Series 16-TT Control, Max Swing

27” Approx, Spindle Center Distance 34” Approx, Slides: Vertical (Z) Travel 18”,

Cross Slide (X) Travel 12”, Chip Conveyor, Motor & Hydraulic Power Unit

2 – KASPER MACHINE CO MODEL VCNC-300 4-AXIS CNC TWIN SPINDLE

VERTICAL TURNING CENTERS, S/Ns VCNC-300L-U0108, VCNC-300L-U0109,

GE Fanuc 18i-T Control

1 – MONROE ENVIRONMENTAL CORP MODEL CMC-010-1 OIL MIST

COLLECTOR, S/N 02-4016-1; Chip Conveyor

4 – KASPER MACHINE CO MODEL DS-250 2-AXIS CNC VERTICAL TURNING

CENTERS, S/Ns DS-250-UAGM0206, DS-250-UAGM0207, DS-250-UA0208,

N/A (All 2003), GE Fanuc 18i-T Control, 10 Position Turret, Chip Conveyor, Pro

Metec OPM 14 Process Marking Control, Monroe Enviro Mist Collector, Chip

Conveyor, Turmoil Chiller

1 – KASPER MACHINE CO MODEL VCNC-400 2-AXIS CNC SINGLE SPINDLE

VERTICAL TURNING CENTER, S/N VCNC401T9419, Fanuc Control, Max

Swing 27” Approx, Spindle Center Distance 34” Approx, Livonia Magnetics

Chip Conveyor, Motor & Hydraulic Power Unit

2005

CNC HORIZONTAL MACHINING CENTERS

2 – TOYODA MODEL FA 630 CNC HORIZONTAL MACHINING CENTERS, S/Ns NM9240, NM9239

(Both 2001), Fanuc 16i-M Control, Travels: X – 39.37”, Y – 33.48”, Z – 29.52”; Pallets 24.8” x 24.8”, Spindle

Nose to Rotary Table Center 6.9” – 36.4”, 50 Taper

CNC HORIZONTAL DRILLING & TAPPING CENTERS

3 – BROTHER MODEL TC-731S CNC HORIZONTAL DRILLING & TAPPING CENTERS, (NEW AS 2000),

S/Ns 111266, 111131, 111113, CNC 840 Control, Travels: X – 19.7”, Y – 15.7”, Z – 15.7”; 12 Position ATC

– 40 Taper, Spindle 8,000 RPM Max, Tsudakoma Model CT-405 Rotary Table, Chip Conveyor,

(11) CNC VERTICAL MACHINING CENTERS

8 – CHIRON MODEL FZ12S CNC HIGH SPEED VERTICAL MACHINING CENTER, (NEW AS 2000),

S/Ns 153-08, 153-09, 424-12, 424-13, 423-81, 423-82, 447-91 & 447-92, GE Fanuc Control, Travels:

X – 21.66”, Y – 11.82”, Z – 14.18”, Knoll Chip Conveyor, (3) with Peiseler Type ZA-5-200 Rotary Table

2 – BROTHER MODEL TC-324 CNC VERTICAL MACHINING CENTERS, (NEW AS 1997), S/Ns 111767,

112179, CNC 830 Control, Travels: X – 16.5”, Y – 12.6”“, Z – 10.2”; 14 Position ATC – 30 Taper, Dual Tables

12” x 19.5”, Chip Conveyor

1 – CHIRON MODEL FZ15S CNC VERTICAL MACHINING CENTER, S/N NA (2004), Fanuc 18i Controls

for more information, please visit us on the web at www.maynards.com 5


sPLIne rOLLers • CnC HOrIzOntaL turnIng Centers • CnC tube sWagers

SPLINE ROLLERS

2 – ANDERSON COOK MODEL 340S 24” SPLINE ROLLERS, S/Ns 564, 502, Magelis Terminal,

Walking Beam, 25 HP Motor & Hydraulic Unit, Overarm

1 – ANDERSON COOK / MICH DIV REBUILD MODEL 3237 ROTO FLOW 24” SPLINE

ROLLER, S/Ns 4520, 4521, Walking Beam, 20 HP Motor & Hydraulic Unit, Overarm

1 – ANDERSON COOK MARAND MODEL 340S SPLINE ROLLER, S/N 564 (2003), Equipped

With Magelis Controls

QUANTITY OF SPLINE ROLLER TOOLING

(33) CNC HORIZONTAL TURNING CENTERS

4 – FUJI MODEL ANS-31P 2-AXIS CNC TURNING CENTER, (NEW AS 2006), S/Ns 15534,

14615, 14614, 15533, Fanuc 18i-T Control, Spindle Speeds 750 – 4000 RPM, Marposs P5

Monitor, Fuji Auto Loader, S/N 15534 with Chip Conveyor

22 – OKUMA MODEL LU-15 IMPACT 4-AXIS CNC TURNING CENTERS, (NEW AS 2000),

S/Ns 1211.2013, 1211.2016, 1211.2010, 1211.2012, 1008.1323, 1008.1322, 1109.1668, 1108.1641,

1008.1315, N/A, All above with OSP-U100L Control, S/N 0706.0335, OSP Control, S/Ns 0909.1015

(1997), 0811.0799, 1001.1123, 0909.1019, With OSP-7000L Control, S/Ns 0706.0332, 1706.0336,

0706.0338, With OSP-7000 Control, S/Ns 1210.1982, 1109.1683, 1008.1301, 1008.1317, With OSP-

U100L Control, All with Swing Over Bed 20.87”, Center Distance 23.62”, Max Turning Diameter

14.17”, 12 Position (Upper) & 8 Position (Lower) Turrets, Programmable Tail Stock, (10) with Torit

Model DMC-C Mist Collector, (2) with Hennig Chip Conveyor

4 – OKUMA MODEL LC-20 1SC 2-AXIS CNC TURNING CENTERS, S/Ns 3955, 3957, 3956,

3292, OSP 5000L-G Control, Swing Over Bed 15.75”, Max Turning Diameter 10.24”,

12 Position Turret, Programmable Tail Stock

1 – OKUMA MODEL LR-15 4-AXIS CNC TURNING CENTER, S/N 0408.2003, OSP 5000L-G Control,

Swing Over Bed 17.72”, Max Turning Diameter 23.62”, 10 Position (Upper) & 8 Position (Lower) Turrets

2 – OKUMA MODEL LB-15 2-AXIS CNC TURNING CENTERS, S/Ns 3291, 6109.3890,

OSP Control, 12 Position Turret

2006

IFS CARRIER LINE

(NOTE: Nachi Robots May be Offered Separately)

1 – IFS CARRIER LINE Including: Square D Model 6 Motor Control Center – No R-688534, Conveyor

System, Pinion Cup Press, Axle Tube Inserters, Force Distance Monitors, Artuna Washer, Motors &

Hydraulic Units, Rotators, ABB Airleak Stations, Uson Series 4000 Testers, Overhead Cranes &

Pneumatic Lifts, Trio Tool Stations, Barrel Pumps

1 – NACHI MODEL SH166 HEAVY DUTY 6-AXIS CNC ROBOT, Controller Type AX, Hours 25,651

8 – NACHI MODEL SA160F 6-AXIS CNC ROBOTS (To 1998), Controller Types AR52 & AR,

Teach Pendant

3 – NACHI MODEL SA130F 6-AXIS CNC ROBOTS (1998), Controller Type AR52, Teach Pendant

CNC TUBE SWAGER & TUBE TRANSFER LINE

1 – TORRINGTON MODEL AMSFM-40-013 CNC 4-STATION TUBE SWAGER, S/N 52069390-F-2

(1999), Tube Length 34”, Auto Feed Conveyor, Max Opening 33.63”; Forming Units & Transition Unit,

Left Side Stroke 21”, Right Side Stroke 7”, Square D Model 6 Motor Control Center, Large Qty Swager

Dies, (4) Dual 60 HP Motors & Hyd Pumps

1 – NEWCOR UTICA TUBE MACHINING TRANSFER LINE, Dual Drive & Tri-Way Drill Units, Magnetek

GPD515 Drives & Yaskawa GPD 515/65 Drives, Indramat Drives & SOT Controls, Handling & Drilling

Stations, Allen Bradley Transfer Conveyors, Tarpon Gantry Loaders

2006

6

to schedule an auction, please call Hilco Industrial, LLC at 1.877.37.HILCO (44526)


InsPeCtIOn equIPMent • Lab equIPMent

2 – ZEISS MODEL PRISMO 9/12/7 HTG BRIDGE TYPE

COORDINATE MEASURING MACHINES,

S/Ns 100919, 102004, Measuring Ranges: X – 35.4”,

Y – 46.5”, Z – 25.6”; Controller; Zeiss Pendant;

S/N 100919: High Temperature Gradient Version, Multi

Probe Head

2 – ZEISS MODEL PRISMO BRIDGE TYPE COORDINATE

MEASURING MACHINES, S/Ns 115188, 115038,

Measuring Ranges: X – 47”, Y – 118”, Z – 39”, Zeiss

Pendant, Probe

1 – ZEISS MODEL DCC DB 4880-36 BRIDGE TYPE

COORDINATE MEASURING MACHINE, S/N Y49935

(1993), PH9C MK2 Probe Head Control Unit, Renishaw

Model PH9A Probe, Pendant

1 – ZEISS MODEL UMM 550 BRIDGE TYPE COORDINATE

MEASURING MACHINE, S/N 88378, Measuring

Ranges: X –19.68", Y – 47.24", Z – 15.75"; Controller S/N

87314, Computer/Monitor/Printer, BT 000261427 (S-12)

1 – ZEISS MODEL RONDCOM 60A ROUNDNESS &

CYLINDRICAL PROFILE MEASURING MACHINE,

S/N MA6503AV (2001), Max Diameter 16.53”,

Measuring Height 27.56” OD Max / 19.68” ID Max;

BT AAA101087

1 – CORDAX MODEL 1808 COORDINATE MEASURING

MACHINE, S/N N/A, Granite Plate 26” x 31.5”,

Renishaw MIH Probe

1 – OPTICAL GAGING PRODUCTS SMARTSCOPE

FLASH MEASURING SYSTEM

1 – STARRETT SIGMA MODEL HCS800 31.5” OPTICAL

COMPARATOR, S/N 0020, Lens Selection Control,

Quadra Chek Computer

1 – STARRETT SIGMA MODEL MA350 14” OPTICAL

COMPARATOR, S/N 1768 (2000), Quadra Chek 2000

1 – TAYLOR HOBSON PNEUMO SURFTRONIC 3+

ROUGHNESS TESTER (Loc Gage Room)

1 – STURTEVANT RICHMONT MODEL ML-1000 DIGITAL

TORQUE TESTER, S/N 1064, Part No 10167, Capacity

1,000 Ft/Lbs

1 – FEDERAL ELECTRONIC DIGITAL HEIGHT INDICATOR

INSPECTION EQUIPMENT

1 – DYNAMIC MICROSCOPE W/ROI ILLUMINATOR

2 – WILSON ROCKWELL SERIES 2000 / MODEL 2002T

TESTING INDENTORS, S/N C2132, C2137,

Instron Pendant

1 – WILSON TUKON SERIES 200 HARDNESS TESTER,

S/N 902320

1 – WILSON ROCKWELL SERIES 500 HARDNESS

TESTER, S/N 94056102

1 – WILSON BRINELL HARDNESS TESTER, S/N 93487-Z/94,

BT 00302076

1 – ROCKWELL MODEL 5 DR RB HARDNESS TESTER

1 – BROWN & SHARPE MODEL MICRO HITE 900

HEIGHT GAUGE, S/N 8C 0099 11

1 – STARRETT 18” DIGI CHECK HEIGHT GAUGE,

S/N 12805, Catalog No 258

1 – OLYMPUS MODEL SZX-FOF RESEARCH

MICROSCOPE SYSTEM, S/N 2H26471, Video

1 – OLYMPUS MODEL PMG3 INVERTED MICROSCOPE,

S/N 2G0394, PC, Monitor

1 – NEW AGE MODEL MT90 PRODUCTION MICROHARDNESS

TESTER, DRO, Newport Model ESP300 Universal

Motion Controller/Driver

1 – FW BELL MODEL 5060 TESLAMETER

1 – ZEISS ICM405 INVERTED MICROSCOPE, S/N 097824

1 – STARRETT PINK GRANITE PLATE, 36” x 36”

1 – BLACK GRANITE PLATE, 60” x 120”

QUANTITY OF ROI MODEL 150 ILLUMINATORS

QUANTITY OF BUEHLER CAT 49-1885-160 ECOMET

6 DUAL STATION METAL POLISHERS

Gauge Block Sets,Ring Gauge Sets, Mitutoyo & Starrett

Calipers; Torque Wrenches, Magnetic Bases, Dial Indicators,

SONY Gauging Probes, MAHR/FEDERAL Pocket Surf Unit,

TAYLOR HOBSON & RAYTEK RAYNGER Surftronic Test

Units, AMETEK Gauges, ACMI Model 151A Borescope,

MAHR MSP2 Scope, BARBER COLMAN Memocal 2000

Hand Held Calibrator, S/N 11637; SHEFFIELD Model 542

Visual Gauge, Transducers, USON Components

LAB EQUIPMENT

1 – CLIMATE CONTROLLED ROOM, Sizes 20’ 7.25”

x 20’ 7.25” x 13’ 4” High; Drop Ceiling 11’ High,

(2) Windows, Double Door

1 – ULRICH LAB FREEZER

1 – AQUA SENSE / SBS CORP MOISTURE

MONITORING SYSTEM, S/N 4391

1 – FISHER SCIENTIFIC ISOTEMP OVEN,

S/N 804N0086, Max Temp 750 Deg F

2 – FISHER SCIENTIFIC BENCH MODEL

CENTRIFUGES

2 – BUEHLER MODEL SIMPLIMET 2000 AUTOMAT-

IC MOUNTING PRESSES

1 – LABCONCO PROTECTIVE LABORATORY

HOOD

to schedule an auction, please call Maynards Industries at 248.569.9781 7


ObOtIC WeLDIng CeLLs • CnC rObOts

ROBOTIC WELDING CELLS

1 – ACTION AUTOMATION TACK WELDING CELL, S/O 3702 (2000), (1) Nachi Model SA160F

CNC Robot, Mfg R#30766 (2000), Controller Type AR52 (47,166 Hours), Mfg #B99BG391;

(2) Nachi Model SC15F CNC Robots, Mfg R# 30405 & 30465; Controllers Type AR52, Teach

Pendant; (2) Lincoln Ideal Arc DC600 Welders, (2) Lincoln NA-5 Weld Controllers, Tack Cell B

1 – ACTION AUTOMATION FINAL WELD TACK WELDING CELL, S/O 3702 (2000), (8) Nachi

Robots, (7) Lincoln IdealArc DC 600 Welders; (8) Lincoln NA-5 Weld Controllers, (4) Impact

Welding Arc Agent 2000 Monitoring Systems; Gantry Automatic Transfer

1 – WELDEX SHOCK WELDING CELL, Dual Fixture Cell, (4) Lincoln DC-600 Welders,

(4) Lincoln NA-5 Weld Controllers, RHM Hydraulic Power Unit, Enclosure

2 – WELDEX WELDING CELLS, (4) Lincoln DC-600 Welders, Enclosure

3 – WELDEX WELDING CELLS, (2 & 1) Lincoln DC-600 Welders, (1 & 2) Lincoln NA-5 Weld

Controller, Fixture Table, Enclosure

2 – WELDEX SHOCK BRACKET WELDING CELLS, (1 & 2) Lincoln Ideal Arc DC-600 Welders,

(1) Lincoln NA-5 Weld Controller, Indramat AC Servo Compact Controller, Fixture, Enclosure

1 – WELDEX DUAL STATION SHOCK BRACKET WELDING CELL, (4) Lincoln Ideal Arc DC-600

Welders, (3) Lincoln NA-5 Weld Controllers, Fixtures, Enclosure, Motor & Hydraulic Power Unit

1 – WELDEX SWAY BAR WELDING CELL, (1) Lincoln NA-5 Weld Controller, Fixture, Enclosure

1 – ACTION AUTOMATION SWAY BAR BRACKET WELDING CELL, S/N 3671-51A, (2) Lincoln

Ideal Arc DC-600 Welders, (2) Lincoln NA-5 Weld Controllers, Modicon Operators Terminal,

Fixture, Enclosure

1 – ACTION AUTOMATION WEST SHOCK BRACKET TO TUBE WELDING CELL, S/N 3671-51B,

(2) Lincoln Ideal Arc DC-600 Welders, (2) Lincoln NA-5 Weld Controllers, Modicon Operators Terminal

1 – CURTON INC SHOCK BRACKET DUAL WELDING CELL, (4) Lincoln Ideal Arc DC-600

Welders, (4) Lincoln NA-5 Weld Controllers, Enclosure, Motor & Hydraulic Power Unit

2 – WELDEX SPRING SEAT WELDING CELLS, (2) Lincoln Ideal Arc DC-600 Welders,

(2) Lincoln NA-5 Weld Controllers

1 – NEWCOR WELDEX SPRING SEAT WELDING CELL, (2) Lincoln Ideal Arc DC-600 Welders,

(1) Lincoln NA-5 Weld Controller, Fixture, Enclosure

1 – NEWCOR WELDEX FLANGE WELDING CELL, (2) Lincoln Ideal Arc DC-600 Welders,

(2) Lincoln NA-5 Weld Controllers, Fixture, Enclosure, Motor & Hydraulic Power Unit

1 – DUAL STATION FLANGE WELDING CELL, (2) Lincoln Ideal Arc DC-600 Welders,

(2) Lincoln NA-5 Weld Controllers, (2) Fixtures w/Modicon Telemecanique Control, Beta Plus DC

Control, (2) Impact Welding Arc 2000 Weld Monitor System, (2) RHM Hydraulic Power Units

1 – DUAL STATION WELDING CELL, (4) Lincoln Ideal Arc DC-600 Welders, (2) Lincoln NA-5 Weld

Controllers

CNC GANTRY ROBOTS

(NOTE: May be Offered Individually or with Transfer Lines)

3 – FANUC ROBOTIC GANTRY RAIL SYSTEMS (May Be Offered with or

without Fanuc Robots), Length 80’ Approx: (2) With (3) Robots, (1)

With (4) Robots

3 – FANUC MODEL M-710iB 70T CNC GANTRY MOUNTED

ROBOTS, F-73242, F-73243, F-73244 (All 2005), Controller R-J3iB

– S/N E057002246

2 – FANUC MODEL M-710iB 70T CNC GANTRY MOUNTED ROBOTS,

F-73241, F-73240 (Both 2005), Controller R-J3iB – S/N E05608533

7 – FANUC MODEL M-710iB CNC GANTRY MOUNTED ROBOT,

F-74307, F-73245, F-74308, F-74305, F-74306, F-73239

(All 2005), F-60920 (2003), Controller R-J3iB

CNC ROBOTS

2 – ABB MODEL SC15-F 6-AXIS CNC ROBOTS, Controller Type AR,

Lincoln NA-5R Interface Adapter

1 – ABB MODEL SA160F 6-AXIS CNC ROBOT, Controller Type AR

(24) QUENCH PRESSES

24 – GLEASON MODEL 529 QUENCH PRESSES, S/Ns 968204, 968202,

968206, 968201, 968203, 968205, 100108, 668202, 27901/R.30604,

1739-01, 1739-04, 27901-R30171, (12) NA (To 2004), Max Diameter

10.5”, Max Height 4”, Approx Total Force 49,500 lbf

8

for more information, please visit us on the web at www.hilcoind.com


Heat treat • quenCH Presses • WasHers

HEAT TREAT EQUIPMENT

1 – EPCON INDUSTRIAL SYSTEMS MODEL

E-22044-G-350 TWO ZONE TYPE II CLASS B

DRAW FURNACE, S/N 570-973, Overall

Dimensions 71’ L x 19’ 2” W x 14’ H / Work

Dimensions 204’ L x 1’ 10” W x 3’ 10” H, Natural

Gas, Max Temp 440 Deg F, Conveyor Fed

1 – INDUSTRIAL HEATING TWO ZONE DRAW

FURNACE, Overall Length 35’ Approx x

Conveyor Width 34” x Height 11”

1 – THERM-ALLIANCE MODEL TEMPER

NATURAL GAS FURNACE, S/N 3293

(1997), Length 50’ Approx x Belt Width 34”

Approx, Two Heat Zones, Max Temp 750

Degrees F, Opening Height 14” Approx, NYB

Air Cooler, Maxon Valves, Equipmeter

Regulator, ABB Thermal Aire Fans

1 – HOLCROFT PUSHER TYPE CARBURIZ-

ING RING GEAR PINION FURNACE,

S/N LJ-4636, Six Lanes, Approx Dimensions

40’ L x 11’ W, Five Heat Zones, Side Feed

Conveyor, Natural Gas

3 – HOLCROFT PUSHER TYPE CARBURIZ-

ING PINION FURNACES, S/Ns CJ-4736,

(2) N/A, Five Lanes, Approx Dimensions 40’ L

x 11’ W; (1) Carriers 14” x 14”, Side Feed

Conveyor, Natural Gas; (2) Five Heat Zones,

Natural Gas, Furnace Line #8; STERLING

SYSTEMS WASHER, Motor & Gusher Pump

ANNEALING MACHINES

1 – AJAX MAGNATHERMIC S-3/10-75 ANNEALING MACHINE, S/N 1B540

2 – AJAX TOCCO S10 ANNEALING MACHINES, S/Ns H2M750 (1991) & NA

WASHERS

3 – REINHART THREE STAGE RING/PINION LAPPING COMPOUND & MONORAIL WASHERS, S/Ns 4168000,

4198000, 4199000 (All 2007), Magelis Terminal, Open Height 60” Approx, Stainless Steel, Wash/Rinse/Blow Off,

Enclosure w/60 HP Motor & New York Blower, HR BLACK Media Type Filtration System, Width 50”, Capacity 860 Gallon

1 – REINHART THREE STAGE RING/PINION LAPPING COMPOUND CONVEYOR WASHER, S/N 4198000 (2006),

Magelis Terminal, Length 15’ Approx, Stainless Steel, Wash/Rinse/Blow Off, Enclosure w/60 HP Motor & New York

Blower, BT AAA267013; Flo-Tec Filter Media Conveyor System – Carriers 22” wide

1 – FINDLAY MACHINE & TOOL THREE STAGE WASHER, Job #050038-DC-5, Length 25’ Approx, Opening 28” Wide x 44” High, Cart Fed

1 – BOWDEN MODEL CCVW-1-D-400 CHAIN CONVEYOR VERTICAL WASHING SYSTEM, Job 118.06004, Liquid

Turbo Charger 7.5 HP Motor, 5 HP Blower, 7.5 HP Chip Removal Motor, Parts Carriage Rack 29” Wide, Torit Dry Flo

Unit, Magelis Operators Control Screen

1 – ASE / FINAL PHASE THREE STAGE WASHER, Length 42’ x Conveyor Width 15”, BT AAA294029 (Col K-21)

1 – THREE STAGE WASHER, Length 15’ x Opening 14” Wide, Conveyor Fed

1 – INDUSTRIAL METAL FABRICATORS MODEL CCVW-1-D-400 THREE STAGE MONORAIL WASHER, S/N 2124,

Opening 42” H x 21” W

2 – CAE RANSAHOFF BASKET TYPE IMMERSION WASHERS, Allen Bradley Panelview 550 Terminal

1 – GALLAGHER-KAISER MODEL GYRO KLEEN THREE STAGE WASHER, Monorail Type, Opening 18" W x 26" H

for more information, please visit us on the web at www.maynards.com 9


MaCHIne aCCessOrIes • sWItCHgear • WeLDIng equIPMent

MARKING MACHINES

4 – COLUMBIA MARKING MACHINES, S/Ns T9770, T-1188, U-4220, W-6750

1 – ABB PIN PRESS (2001), 5 HP Motor & Hydraulic Unit, Force Distance Monitor

1 – EQUIPTO ROLLING BASE STORAGE SYSTEM, Two Sets of 90

Storage Cabinets (Loc Gage Room)

Wood Top Benches, STRONG HOLD Steel Storage Cabinets

MACHINE ACCESSORIES

1 – ROYAL VARISET TOOL PRESETTER, S/N 14688-A

Quantity of Air Gauge Co Read Outs, Flex Gage Controls

Unused NORTON Grinding Wheels – 18” x .130” x 7/8” Opening

Over 650 – PARTS TRANSFER/STORAGE CARTS, 3 Shelf, Trays 33” x 24”

POWER DISTRIBUTION EQUIPMENT

1 – BUSS DUCT – 600 AMP SERVICE – Approx 7,000 Ft

SWITCHGEAR & SWITCH STATIONS

QUANTITY OF HVL LOAD INTERRUPTED SWITCHES (2004), Rated 15

KVA; SQUARE D Power Logic Circuit Monitors; Power Logic Digital Controllers

Some electrical distribution subject to late delivery

WELDING EQUIPMENT

1 – MILLER BOBCAT 225 G

W E L D E R / G E N E R ATO R ,

S/N N/A, CC/CV-AC/DC Weld Power Supply; 8,000 Watt Generator, Onan Perfomer 16 Gas

Engine, Rolling Cart

2 – MILLER MODEL DELTAWELD 302 CV-DC WELD POWER SOURCES,

S/Ns LE492957, KH445260, 24 V Wire Feed

1 – MILLER MODEL SYNCROWAVE 350LX CC-AC/DC SQUARE WAVE POWER

SOURCE, S/N LC376684, Torit Dust Collector

2 – LINCOLN MODEL IDEAL ARC 600 CV/CC DC ARC WELDERS, S/Ns U1941005925,

U1970305041, (1) With Model LN9 Wire Feed; Torit 1.5 HP Trunkline Porta-Trunk

1 – LINCOLN MODEL POWER WAVE 455 WELDER, S/N U1011002765, Lincoln Power

Feed Speed 800-1200 IPM

1 – LINCOLN PRECISION TIG 275 WELDER, S/N U1060312259, Weld Mode Control

1 – LINCOLN MODEL R3S 600 DC-600 WELDER, S/N AC-870061

1 – THERMAL DYNAMICS MODEL CUTMASTER 100 PLASMA CUTTER

1 – SURFACE COMBUSTION INC SIZE RX-50-100-4V RX GENERATOR, S/N AC-43208-1,

Capacity 10,000 SCFH; Natural Gas – Cu Ft/Hour 900; Reaction 2000 CuFt/Hr, APT Case

Mate Process Control System,

1 – THERMCO MODEL 6205CA30A1100 BULK GAS MIXING SYSTEM, S/N N/A, Supply

CO & Argon, Capacity 0-5,000 SCFH

1 – DRY ROD MODEL 15 D ELECTRODE STABILIZING OVEN, TYPE 300, Watts 1000,

Temp 100 Deg – 550 Deg F

QUANTITY OF PRESTO 48” x 56” LIFT TABLES

Welding Tables, Portable Fume Collectors, Welding Rod, Minuteman Blowers, Victor Pressure

Regulators, Lincoln Accu Trak Barrels of Super Arc L-56 .052” Dia. Welding Wire, C-Clamps

Bid Live in Person Onsite, or Online at

www.hilcoind.com

10 to schedule an auction, please call Hilco Industrial, LLC at 1.877.37.HILCO (44526)


ENGINE LATHES

1 – TOOLMEX MODEL TUR 630A / 120 ENGINE

LATHE, S/N 51188, Swing 20”, Centers 125”, Cross

Slide, Tail Stock, Steady Rest, Newall 2-Axis DRO,

Speeds 15-1400 RPM, 15.5” Diameter 3-Jaw Chuck

1 – MONARCH ENGINE LATHE, S/N 33670, Actual

Swing 18.5”, Centers 78”, Cross Slide, Tail Stock,

Steady Rest, 12” Diameter 3-Jaw Chuck

1 – AXELSON ENGINE LATHE, S/N N/A, Actual

Swing 18.5”, Centers 54”, Cross Slide, Tail Stock,

10” Diameter 4-Jaw Chuck

1 – CLAUSING COLCHESTER ENGINE LATHE,

S/N MTD 196 (2001), Swing 18”, Hole Through

Spindle 3”, Cross Slide, Tail Stock, Steady Rest,

Acu-Rite 2-Axis DRO, Inch/Metric, 13” Diameter

3-Jaw Chuck

1 – TRAK MODEL TRL1745P ENGINE LATHE, S/N 98-

7359 (1998), Swing 17”, Centers 45”, Proto Trak LX2

Control, Tail Stock, Cross Slide, Speeds 40-2200 RPM

1 – MONARCH MODEL 20” ENGINE LATHE,

S/N 24304, Actual Swing 22”, Centers 72”, Tail

Stock, Cross Slide, 7 3/4” 3-Jaw Chuck

1 – SPRINGFIELD MODEL 16” ENGINE LATHE,

S/N N/A, Swing 16”, Centers 100” Approx, Cross

Slide, Tail Stock, Speeds 15-607 RPM

1 – LeBLOND MODEL REGAL ENGINE LATHE,

S/N 6C1053, Swing 14”, Centers 30”, Cross Slide,

Tail Stock, Speeds 45-1800 RPM

fabrICatIng equIPMent • engIne LatHes

FABRICATING EQUIPMENT

1 – ACCURPRESS MODEL 710010 100 TON

HYDRAULIC PRESS BRAKE, S/N 4968 (1998),

Overall Bed & Ram 10’, Distance Between

Housings 8’ 6”, ETS Control, 24” Front Operated

Power Back Gauge, Throat 10”, Two (2) 36”

Front Stock Supports, 10’ 4-Way Die Holde

1 – ASSORTED BRAKE DIES

1 – CHICAGO D&K MODEL PB10250 10’ X 1/4”

POWER APRON BRAKE, S/N 120655,

Power Clamp, Power Apron

1 – CHICAGO D&K MODEL BPU-812-6 BOX &

PAN BRAKE, S/N 327193-T, Length 8’, Capacity

12 Gauge, 22 Finger Dies

1 – NATIONAL MODEL U6-7212 BOX & PAN BRAKE,

S/N 785-1096, Length 6’, Capacity 12 Gauge

1 – ACCURSHEAR MODEL 625010 10’ x 1/4”

POWER SQUARING SHEAR, S/N 3845 (2000),

Stroke Control, 36” Front Operated Power Back

Gauge, Squaring Arm 8’, Front Stock Supports

1 – NIAGARA MODEL 1010SHR 10’ X 1/2” MECHANI-

CAL POWER SQUARING SHEAR, S/N 51339

1 – MODEL 4 IRONWORKER, S/N N/A, Capacity:

Shear 1.75” Round / 1.5” Square; Angle 90 deg – 4”

x 4” x 1/2”; Coper, Punch – 1 1/16” through 5/8” Thick

2 – MARVEL SERIES 8 – MARK II UNIVERSAL

TILT FRAME VERTICAL BANDSAWS, S/Ns

828921, 8-MARK II

1 – DO ALL 26” VERTICAL BAND SAW, S/N N/A,

BT 000293616 (Loc T-33)

1 – WF WELLS MODEL F-16-2A AUTOMATIC

HORIZONTAL BAND SAW, S/N A2452/F99395,

Carriage Vise, Conveyor, Auto/Manual

1 – HYD MECH MODEL S-20 SERIES II HORI-

ZONTAL BAND SAW, S/N 60599383

1 – PULLMAX MODEL P21 UNIVERSAL MACHINE

TYPE NIBBLER, S/N P21-1070, Throat 40”

1 – NATIONAL MODEL A/B 4816 POWER INITIAL

PINCH PLATE BENDING ROLL, Capacity 48” x

16 Gauge, Roll Diameter 3”, S/N 816_99

to schedule an auction, please call Maynards Industries at 248.569.9781 11


tOOLrOOM • Dust COLLeCtOrs • fILtratIOn systeMs

TOOLROOM

1 – BLANCHARD MODEL NO 22CK ROTARY SURFACE GRINDER,

S/N 12807, Electromagnetic Chuck 42” Diameter, 40 HP

1 – BRIDGEPORT 3-AXIS CNC VERTICAL MILL, S/N 270227,

Proto Trak MX3 Control, Kurt Power Draw Bar, Vari-Speed,

2 HP Motor

2 – BRIDGEPORT VERTICAL MILLS, Power Feed Table 9” x

48”, 2 HP Motor, Kurt Power Draw Bar, Acu-Rite DRO

1 – KEARNEY & TRECKER MILWAUKEE MODEL D VERTICAL

MILL, S/N 4-8728, Table 16” x 36”, No 2 Rotary Milling Head

1 – CINCINNATI HYDROTEL VERTICAL MILL, S/N 1H1V1K-52-R-

75, Table 28” x 60”

1 – CINCINNATI MODEL 4 HORIZONTAL MILL, S/N 2A4U1M-8,

Table 11” x 68”

1 – DEVLIEG MODEL 4K-72 SPIRAMATIC JIG MILL, S/N 9190,

Table 40” x 72”, Sony DRO

1 – WILTON MODEL 5216001 4’ x 17” Approx RADIAL ARM

DRILL, S/N 15274, 2-Way Box Table, Speeds 40-1920 RPM

1 – CARLTON 4’ x 9” RADIAL ARM DRILL, Box Table

4 – OKAMOTO, BROWN & SHARPE AND HARIG SURFACE GRINDERS

1 – CINCINNATI 12” x 36” UNIVERSAL GRINDER, S/N 2U3D6C-

2, 10” Diameter 3-Jaw Chuck, Tail Stock

1 – NORTON 10” x 18” CYLINDRICAL GRINDER

1 – DEMAGNETIZER MODEL OLAJ5x12 12” W x 5” H

DEMAGNETIZER, S/N 9701X018

2 – CINCINNATI TOOL & CUTTER GRINDERS

1 – DAVIS MODEL 5 KEYSEATER, S/N 5-951

Drills, Disc Sanders/Grinders, Pedestal Grinders, Arbor Presses

SHOP PRESSES

1 – LOUIS SMALL MODEL CCPM 250T 250 TON HYDRAULIC

PRESS, S/N 2624

1 – DAKE MODEL PSS 40 TON H-FRAME PRESS, S/N 4603 (2004),

Power Pump, Between Uprights 35.5”

4 – DENISON MULTIPRESS & N/A 10 TON & 8 TON HYDRAULIC

GAP FRAME PRESSES

1 – ENERPAC 200 TON HYDRAULIC WHEEL PRESS, Bed 33” x 39”,

Between Uprights 48”, Pump Series 5000, Enerpac Hyd Pump

DUST COLLECTORS / MIST COLLECTORS

3 – TORIT MODELS DFT 3-36, DFT 3-24 & DF 12-8 DUST COLLECTORS

1 – MONROE ENVIRONMENTAL OMC-020-02 OIL MIST COLLECTOR

1 – HELICAL DYNAMICS INC 4KH-BD HELI-FLO SYSTEM HELICAL

MIST COLLECTOR

FILTRATION SYSTEMS

1 – COOLANT FILTRATION SYSTEM, (3) Motors & Pumps,

Conveyor Approx 30’ x 48” Wide, Filter & Transfer Pumps

1 – FLO-TEC INC FILTRATION SYSTEM

1 – FILTRA SYSTEMS FILTRATION SYSTEM #5, Job #1030399, Magnetic

Seperator Conveyor, Filter Pumps 1 & 2; Systems Supply Pumps 1,2 & 3

1 – CENTRIFUGE, Seitol Pump, Allen Bradley Panelview 600 Terminal

ROTARY TRANSFER DRILLING MACHINES

1 – 8 STATION ROTARY TRANSFER DRILLING MACHINE: Drill

/Probe/Chamfer/ Ream/Probe/Tap & Probe Stations; Rotary Table

Diameter 72”, 15 HP Motor & Hydraulic Unit, Chip Conveyor

1 – NEWCOR 9 STATION ROTARY DIAL TRANSFER, Rotary Table 96"

Diameter, Demag Drives

12

for more information, please visit us on the web at www.hilcoind.com


asseMbLy & transfer LInes

ASSEMBLY LINES

1 – ABB FLEXIBLE AUTOMATION 9 1/4” DIFFERENTIAL CARRIER ASSEMBLY

LINE (Robots May Be Offered Seperately) Including: Square D Motor Control

Center, (5) Nachi CNC Robots, Ingersoll Rand Insight Controls, Pneumatic

Fasteners, Trio Tool Insertion Units, Bearing Insertion Press, Nut Runners

1 – 8 1/4” REAR AXLE ASSEMBLY LINE Including: (5) NACHI CNC Robots, Centri

Spray Washer; Square D Model 6 Motor Control Center; (3) ITW

STR-587 Balancers, Magelis Terminals, Fasteners & Power Modules, Turntables

1 – 9 1/4” REAR AXLE ASSEMBLY LINE Including: Nut Runners, ABS Tester,

Robotics Inc Automatic Sealant Applicator, Uson Tester, Dominion

Technologies Axle Fill, DeMag Rails & Pneumatic Hoists

1 – 8 1/4” TRAILING AXLE ASSEMBLY LINE Including: Turn Tables, Cooper Tools

Nut Runners, Qualtech Model QCS7000 Inspection Scanner, Digital Torque

Wrenches, ABS Brake Test Station, Robotics Inc Automatic Sealant Applicator,

Leak Flow Testers, Brake Caliper Bolts, Uson Testers, Compufill OIl Fill Station

1 – AXLE ASSEMBLY LINE Including: Auto Con Conveyor System, Atlas

Copco Fastening Stations, Nachi Model SC50F-01 CNC Robot, Dual I/R

Pneumatic Barrel Pumps, I/R Insight Controllers, Uson Series 4000 Leak

Testers, Oil Fill Station, Magelis Terminals

1 – 8 1/4” CROSS BUILD SECTION TRANSFER LINE Including: KJ Balancing

Cell, Nachi Model SH200 CNC Robot, (3) ITW Model STR-593 Axle

Balancing Machines, CBI Controller, Cooper Fastening Systems, Atlas

Copco Fastening Systems

4 – ACRO AUTOMATION ASSEMBLY, PRESS, WELD & PUNCH WELDING

LINES, (6) Lincoln Ideal Arc DC-600 Welders, Asstd Lincoln NA-5 Weld

Controllers, (6) AWC Dereelers, Stud & Bearing Presses, Gantry Transfer

Arm, Service Engineering Bowl Feeders, Roman Weld Transformers,

Square D Panels, Asstd Motors & Pumps; (1) (2004), (4) Lanes Inbound

Conveyors;(1) With (2) NACHI SH200 CNC Robots (2003); (2) With Weld

Controls w/Indramat Digital AC Servo Compact Controllers

1 – WRIGHT-K TECHNOLOGY ASSEMBLY, PRESS, WELD & PUNCH WELDING

LINE, (2) NACHI Model SH200-03 CNC Robots (To 2008); (6) Lincoln Ideal Arc

DC-600 Welders, (6) Lincoln NA-5 Weld Controllers, (6) AWC Dereelers, Stud &

Bearing Presses, Gantry Transfer Arm, Service Engineering Bowl Feeders,

Square D Model 6 Motor Control Center, Asstd Motors & Pumps

1 – ABB AUTOMATION PINION LINE - WK FRONT (2003) Including: (4)

Nachi Model SF166-02 CNC Robots (2000), Controller AW11; (2) ITW

MODEL STR-585 Balancers, S/N 6003 & 6004; Motors & Hydraulic Power

Units, Turntables, Conveyor System, Force Distance Monitors, Atlas

Copco Fastening Systems

1 – ABB AUTOMATION LXC198 AXLE ASSEMBLY LINE (2002) Including: (3) Nachi

Model SH166-01 CNC Robots, Controller AW11; Square D Model 6 Motor Center,

Torit Dry Flo Units, Magelis Terminals, Atlas Copco Nut Runners, Turntables,

Conveyors, Knight Balancers, Robotics Inc Automatic Dispensing System

TRANSFER LINES

1 – EX-CELL-O 18 STATION TRANSFER LINE, Wash Booth, High Pressure Coolant,

Hydraulic Power Units, (3) NACHI Model SA130-03 CNC Robots, Controller AR; Gantry

Loader, Indramat Digital Compact Controllers

1 – EX-CELL-O 12 STATION INLINE TRANSFER MACHINE, Carrier Machining, Indramat

Drives, Magelis Operators Terminals, Modicon Factory Mate Plus Controls, Artis Process

Monitoring ABF-6 Controls, AutoCon Conveyor Line, Rotator Stations

2 – NACHI MODEL SA160F & SA160F-01 CNC ROBOTS (Both 1998), Controller Type AR

1 – THREE STAGE TURBO WASHER, S/N N/A, Length 20’, Opening Width 20” x Height

15”, Magelis Operators Terminal, 15 HP, Part of 12 Station Inline Transfer Line

1 – FILTRASYSTEMS MODEL WW WORK CONVEYOR COOLANT FILTRATION SYSTEM,

S/N 10236, Filtra Systems Job 10236, (3) System Pumps, (2) High Pressure Pumps; Chip

Drag Conveyor, Industrial Vertical Turbine Pumps, Part of 12 Station Inline Transfer Line

1 – KOOLANT KOOLERS SAV 40,0000-CL-SW-AT-C COOLANT CHILLER, S/N 12873

1 – EXCELLO 7 STATION INLINE TRANSFER MACHINE, Carrier Machining, Magelis Operators

Terminals, Samsomatic Inline Tube Gauges, Rotators, Dual Johnstone Pneumatic Bucket Pumps

1 – EX-CELL-O 9.25" CARRIER FINISHER A TRANSFER LINE Including: Machining Stations, Indramat

Drive Controllers, AEC Modicon Factory Mate Plus Controls. Telemecanique CCX17 Controls

1 – EX-CELL-O FINISHER B MACHINING CELL, 3 Stations, Gantry Loader,

Telemecanique CCX17 Controls, Indramat Drives

1 – LASALLE 8.25" CASE TRANSFER LINE, S/N 7173, Consisting of Sys-T-Mation

Feed/Unloader/Transfer; Monorail Conveyor Washer, 28 Station Transfer Line - Emerson

Drives, Motors & Hydraulic Pumps

1 – LASALLE 8.25" REAR CASE TRANSFER LINE

1 – LASALLE 9.25" CASE TRANSFER LINE, 13 Station Transfer

1 – LAMB TRANSFER LINE

for more information, please visit us on the web at www.maynards.com 13


Cranes • fOrkLIfts • rOLLIng stOCk

CRANES

2 – OVERHEAD CRANE & SERVICE 10-TON AND SHEPHARD

NILES 5-TON DUAL GIRDER OVERHEAD BRIDGE

CRANES, Span 45’ Approx, 6-Way Pendant

2 – CONTINENTAL CRANE 3-TON & R&M 2-TON SINGLE

GIRDER CRANES

1 – CONTINENTAL CRANE 1-TON SINGLE GIRDER CRANE

CELL, Approx Dimensions: Span 22’ x Rail Length 70’, x

Height 16’, Space Master II Electric Hoist, 6-Way Pendant

1 – SINGLE GIRDER OVERHEAD BRIDGE CRANE,

S/N CH-5953, Span 45’ Approx

FORKLIFTS

1 – HOIST MODEL FKS10 20,000-LB LPG FORKLIFT, S/N

21124 (1997), Forks 84”, Hours 6769, Forks 84”

1 – ROYAL MODEL TA200 20,000-LB LPG FORKLIFT,

S/N L0433, Model R35215 Boom Attachment – Capacity

12,500 Lbs, S/N RTB120; Hours 5339

2 – HYSTER S180XL 18,000-LB LPG FORKLIFTS,

S/Ns B024D05187V, B024D05181V, Max Lift 95”, Solid Tires

3 – YALE ELECTRIC FORKLIFTS, (2) MODEL

ERC120HDN36SV092 12,000-LB, S/Ns A839D020224,

A839D02032U, (1) MODEL ERC100HDN3BSV092 10,000-LB,

S/N A839D01900U, All With Max Lift 127”, 2-Stage Mast

ROLLING STOCK

1 – BRODERSON MODEL IC-80-3F MOBILE CRANE, S/N 40079, Gas Engine, Carry Deck Capacity

14,000-Lbs., Wylie Model W1250 Load Moment Indicator, Hours Meter 1518.9, 4-Wheel Steer

1 – POWER CART W/MILLER BOBCAT MODEL 225 CC/CV-AC/DC 8000 WATT

GENERATOR & WELDER

1 – MATERIALS POWER CHANGERS MODEL PCE-2-40-DS-M DUAL BATTERY CHANGING STA-

TIONS, S/N 0654023 & 0654050, Capacity 10,000 Lbs, Dual Conveyor 40” Wide

2 – ROTARY LIFT MODEL SP012D312 VEHICLE HOISTS, Capacity 12,000 Lbs

1 – CM DIGIT MTE TESTER, Type A-250

Large Quantity of Taylor Dunn Personnel Carts & Tuggers

4000-Lb Pallet Lifts, Tennant 5700 Floor Scrubbers, Battery Chargers & Washer, 2-Post Forklift Hoist

14 to schedule an auction, please call Hilco Industrial, LLC at 1.877.37.HILCO (44526)


aIr COMPressOrs • steaM generatIOn • suPPOrt, CafeterIa & OffICe

MISCELLANEOUS SUPPORT EQUIPMENT

3 – RIDGID MODEL 535 & (2) MODEL 1224 POWER PIPE THREADERS

1 – HORIZONTAL COMPACTOR, S/N N/A, Loader Width 68”, Trash Motor

Plus Control, Approx Dimensions 25’ Long x 60” Wide x 40” High

1 – SELCO MODEL V15 VERTICAL BALER, Stock #2615, Platen

27” x 59”, Cylinder Stroke 45” Approx.

1 – MARLEY COOLING TOWER

1 – MODULAR OFFICE - Approx Dimensions 11' 6" x 25' x 9' H, A/C

1 – SPX / GSE SCALE SYSTEMS MODEL PRO WEIGH 10,000

CAPACITY PLATFORM SCALE, 72" X 96"

QUANTITY OF SQUARE D I-LINE Busway Disconnect Units, Max 480 V/

600 V, Cat PQ3606G, QTY 120 UNUSED

Large Quantity of Bearings – Timken/Dodge/Fafnir/Morse

HUGE QUANTITY UNUSED COMPONENTS: Binzel, Buehler,

Emerson, Fanuc, Gusher, Kurt, Nachi, NSK, Nord Gear,

Numatics, Panasonic AC Servo Motors, Square D, SEW

Eurodrives, Tennant, More

Parts Washers, Fan Cleaning System, Pallet Racking, Bar

Storage Racks & Material, Stanley Vidmar Cabinets, Trash

Loading Hoppers, Self Dumping Hoppers, Shop Bicycles,

Ingersoll-Rand Insight Controllers, Atlas Copco & Cooper

Industries Servo Driven Fasteners, Atlas Copco Power Macs,

Magenetek GPD Drives, Bosch Servo Drives

AIR COMPRESSORS

4 – INGERSOLL RAND 1000-HP, 400-HP,

350-HP, & 200-HP AIR COMPRESSORS

2 – SPEED AIRE 3JR77 & WORTHINGTON AIR

COMPRESSORS

2 – HANKINSON MODEL H-1010 10,000 SCFM

AIR DRYERS

3 – SURGE TANKS

STEAM GENERATION EQUIPMENT

1 – VAPOR POWER INTERNATIONAL MODEL

MG-5905-AHK-600-DS STEAM GENERATOR

1 – MODEL BHP 600 CIRCULATION HOT

WATER GENERATOR, Max WP 150 PSI

6 – VAPOR LIQUID PHASE HEATERS

CAFETERIA EQUIPMENT

1 – TRUE INDUSTRIES 2-DOOR BEVERAGE COOLER

3 – TRAULSEN & 2-DOOR REFRIGERATORS

1 – BLODGETT MODEL MT1828F-AA TOASTER OVEN

1 – FRYMAST FILTER MAGIC II THREE STATION FRYER

1 – JADE RANGE INC MODEL JSR-36B 15,000 BTU NATURAL

GAS BROILER

1 – JADE RANGE INC MODEL JSR-36GT 24,000 BTU

NATURAL GAS FRY TOP

1 – GARLAND MODEL MASTER 450 OVEN

1 – TRUE INDUSTRIES CABINET REFRIGERATOR

3 – ICE-O-MATIC, MANITOWOC & SCOTSMAN ICE MAKERS

Stainless Steel Counters & Sinks, Heated Stainless Food Serving

Units, Hobart Mixer, Hobart Meat Slicer, Stainless Steel Kitchen

Hood, Chair & Table Sets, Aluminum & Wood Picnic Tables

OFFICE EQUIPMENT

LARGE QUANTITY OF OFFICE EQUIPMENT Including: Desks,

Partitions, Chairs, Conference Tables, Printers

Bid Live in Person Onsite, or Online at

www.hilcoind.com

to schedule an auction, please call Maynards Industries at 248.569.9781 15


Atlanta • Birmingham • Birmingham (UK) • Boston • Charlotte • Chicago • Connecticut • Dallas • Detroit • Grand Rapids • Guadalajara (MX) • Hong Kong

Irapuato (MX) • Leeds (UK) • London (UK) • Los Angeles • Mexico City (MX) • Monterrey (MX) • New York • San Francisco • Toronto • Villahermosa (MX)

Hilco Industrial, LLC

A u c t i o n e e r s • L i q u i d a t o r s • A p p r a i s e r s

Headquarters

31555 W. Fourteen Mile Road, Suite 207

Farmington Hills, MI 48334

Ph: 877-37-HILCO (44526)

Fx: 248.254.9995

www.hilcoind.com

Presorted

First Class Mail

U.S. Postage

PAID

Detroit, Mich.

Permit No. 100

Forwarding Service Requested

HILCO WebCast/OnsIte auCtIOn

aDDress

6700 lynch Road • detroit, mi 48234

buILDIng sPeCIfICatIOns

1.19 million sq. ft. +/-

sIte area

55 acres +/-

CeILIng HeIgHt

varying 15’ to 26’

COLuMn sPaCIng

50’ x 50’

year buILt

1917 with additions through 1999

LOaDIng faCILItIes

overhead doors at grade - 30

loading docks - 30

rOOf

built up - 60%, membrane - 40%

POWer

for More Information, Please Contact the usa Office of:

Phyllis Riina

Phone: +1.248.936.6863

Email: phyllis.riina@cbre.com

15 Kv input with 5 Kv distribution

backup incoming feeds - 480 v distribution

Waste Water treatMent

500,000 gallon capacity

raIL

front Rails, no spur

Hilco real estate

Geoffrey Schnipper • Phone: +1.847.313.4790

Email: gschnipper@hilcorealesate.com

terms of sale

a buyer’s premium of 13.5% for all onsite sales & 16% for all

webcast sales is in effect. everything will be sold to the

highest bidder for cash, in accordance with the auctioneer’s

customary “terms of sale”, copies of which will be posted on

the premises of the sale and subject to additional terms

announced the day of sale. all items will be sold "as is,

wheRe is" basis, and old carco liquidation trust under no

circumstances shall be deemed to have made, and hereby

disclaims, any representation or warranty, either express or

implied, as to any matter whatsoever, including, without

limitation, the condition of any item and the adequacy,

suitability or fitness for any particular purpose of any item or

any portion thereof. although obtained from sources deemed

reliable, the auctioneer makes no warranty or guarantee to the

accuracy of the information herein contained. bidders are

encouraged to thoroughly inspect the items on which they

intend to bid prior to sale. absolutely no items will be removed

until the day after the conclusion of the sale and payment is

made in full. subject to additions, deletions and prior sale.

Payment: all puRchases must be paid in full on

the day of the auction. if you intend to pay by wire transfer,

we will accept payment the day after the sale only if a

deposit of 25% of total purchases is made on the day of the

sale. contact our office for wire transfer instructions. only cash,

wire transfer or certified check, payable to hilco industrial, llc

will be accepted. company checks payable to hilco industrial,

llc will be accepted only if accompanied by a bank letter of

guarantee, (see sample letter below). all sales are

subject to sales tax. purchasers claiming exemptions from

taxes must provide proof satisfactory to the auctioneer of their

entitlement to claim such exemptions.

sample Bank letter

(bank name) unconditionally guarantees payment to

hilco industrial, llc from (company name). this guarantee

will be valid for purchases made at the auction of old

carco liquidating trust f/k/a chrysler detroit axle plant on

june 21 thru 23, 2011.

Follow

Us on:

HILCO Industrial, LLC is a division of Hilco trading, LLC • Headquarters 5 revere Drive, ste. 206 • northbrook, IL 60062 • all rights reserved

Printed in usa • OLDC3457 • IL License #444.000215 • Please visit our website at www.hilcoind.com to review our complete terms and conditions.

More magazines by this user
Similar magazines