Operating Instruction Manual SyCon System Configurator for ...
Operating Instruction Manual SyCon System Configurator for ...
Operating Instruction Manual SyCon System Configurator for ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Getting Started - Configuration Steps 14/132<br />
3 Getting Started - Configuration Steps<br />
3.1 Overview Communication Types<br />
Select the protocol that you want to use from the following table <strong>for</strong><br />
Ethernet or from the table <strong>for</strong> serial protocols. The configuration steps are<br />
described in the given section.<br />
Note: The booklet with the DVD ROM contains in<strong>for</strong>mation <strong>for</strong> the<br />
hardware installation and in<strong>for</strong>mation to the cable. At this point it is<br />
presupposed that the hardware installation was done.<br />
3.1.1 Ethernet Protocols<br />
Communication Described in section Page<br />
Ethernet (TCP, UDP, Configuration Ethernet (TCP, UDP, ALI, SMTP, FTP) 15<br />
SMTP, FTP)<br />
Open Modbus / TCP Configuration Open Modbus / TCP Protocol 15<br />
Table 2: Overview Communication Types Ethernet Protocols<br />
3.1.2 Serial Protocols<br />
Communication Described in section Page<br />
ASCII Configuration ASCII Protocol 16<br />
3946R Configuration 3946R Protocol 17<br />
RK512 Configuration RK512 Protocol 17<br />
Modbus RTU Configuration Modbus RTU Protocol 18<br />
Modbus Plus Configuration Modbus Plus Protocol 18<br />
Modnet 1/N Configuration Modnet 1/N Protocol 19<br />
Modnet 1/SFB Configuration Modnet 1/SFB Protocol 19<br />
Table 3: Overview Communication Types serial Protocols<br />
<strong>SyCon</strong> | <strong>System</strong> <strong>Configurator</strong> <strong>for</strong> Ethernet and serial Protocols<br />
DOC040601OI04EN | Revision 4 | English | 2012-06 | Released | Public © Hilscher, 2004-2012
Change language