Architektur 45/101 lifting doors made in germany - Brunner

brunner

Architektur 45/101 lifting doors made in germany - Brunner

Architektur 45/101

lifting doors

State: 30.08.2012

BRUNNER FIREPLACES

made in germany


Dimension sheet | Architektur 45/101 lifting doors

… with mounting frame 50 mm

… with mounting frame 70 mm

We suggest for CAD planing Palette CAD. Permanent updated drawings: www.brunner.de

Frames / front versions are marked colored. Smoke pipe adapter fixed on the side is available against surcharge.


Dimension sheet | Architektur 45/101 lifting doors

… with door frame

…with moutiting frame 50 mm and convection cladding

We suggest for CAD planing Palette CAD. Permanent updated drawings: www.brunner.de

Frames / front versions are marked colored. Smoke pipe adapter fixed on the side is available against surcharge.


Dimension sheet | Architektur 45/101 lifting doors

…with moutiting frame70 mm and convection cladding

…with frame and convection cladding

We suggest for CAD planing Palette CAD. Permanent updated drawings: www.brunner.de

Frames / front versions are marked colored. Smoke pipe adapter fixed on the side is available against surcharge.


Planning and installation

Architektur 45/101

Tested according to

Values measured at

Suitable for all construction types according to rules

Data for functional demonstration

Rated heat power

Firewood consumption

Combustion performance

Flue gas mass flow

Outlet temperature (before heating surface)

Flue gas temperature after

attached steel smoke hood

adjoining cast iron radiator (GNF10)

accumulation rings (MAS) 1)

adjoining ceramic accumulator 2)

ceramic modular accumulator (KMS system)

water boiler

Necessary supply pressure

Combustion air consumption

Combustion air connection Ø

Heat distribution

Insert / heating surface

Glass (single / double)

Boiler

Cross-section of gratings for max. warm air power

Supply air

cm² 900

Warm air

Minimal oven surface for closed construction type

cm² 900

Surface giving off heat

m² 7,2

Space inside oven chamber without / with convection cladding

Distance to oven chamber wall

cm 8 / 0

Distance to floor

cm -

Heat insulation without / with 3) air gratings / with convection cladding

Wall

cm 18 / 14 / 3

Floor

cm 4 / 2 / 2

Ceiling

cm 25 / 18 / 18

Insulation of additional fire door DHT

cm -

Brick lining of protected walls

cm 10

meets requirement limit values for

Germany / Austria / Switzerland / Norway 1.BImSchV (Stufe 2) / 15a BVG / LRV / -

kW

kg/h

kW

g/s

°C

°C

°C

°C

°C

°C

°C

Pa

m³/h

mm

%

%

%

EN 13229 W

nominal load open door

OK

OK

Weight

Fireplace + burning chamber 4)

kg

182 + 39 + 89

1) Throttle flap recommended

2) Approximate value, must be calculated eventually

3) Values with air gratings, stove casing is heat conducting

4) heater = body + mounted exchanger

Ulrich Brunner GmbH

Zellhuber Ring 17 -18

D-84307 Eggenfelden

Phone: +49 / (0)87 21 / 7 71-0

Fax: +49 / (0)87 21 / 7 71-100

info@brunner.de | www.brunner.de

14

4,3

18

16

-

220

-

-

-

-

-

12

40

125

60 / -

40 / -

-

BRUNNER products are offered and sold only by qualified dealers and service centres.

Subject to technical and assortment changes. Errors excepted. (08/12)

EN 13229 W

-

4,3

18

80

-

130

-

-

-

-

-

6

210

-

- / -

- / -

-

0

0

-

8 / 0

-

18 / 12 / 3

4 / 2 / 2

25 / 18 / 18

-

10

More magazines by this user
Similar magazines