Pow-R-Master⢠- Ideal Industries Inc.
Pow-R-Master⢠- Ideal Industries Inc.
Pow-R-Master⢠- Ideal Industries Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Valve Spool Seal Replacement cont.<br />
4. Install the new valve spool (12).<br />
5. Reinstall the Retainer (9).<br />
6. Reinstall the actuation lever pin (2), the screw (8), and the lever (4).<br />
Trouble Shooting<br />
Problem:<br />
Solutions:<br />
Wire slips through the gripper pad.<br />
a. Clean gripper pads of debris with a wire brush.<br />
b. Change gripper pads.<br />
Problem: Blades and gripper pads close on the wire but the<br />
insulation is not removed.<br />
Solutions:<br />
a. Make sure the wire is located in the correct stripping hole.<br />
b. Make sure the blade is designed for the wire.<br />
c. Make sure the area between the blades is free of debris.<br />
d. Make sure the operating air pressure is between 80<br />
and 125 PSI.<br />
e. Make sure the lever, links and sprockets (23) and chain (22)<br />
linkage areas are well lubricated.<br />
- 3 -
Change language