800 10676 Triple Band 65 Degree Antenna - Kathrein Scala Division

800 10676
Triple Band 65 Degree Antenna
• X-polarized (+45° and -45°).
• UV resistant fiberglass radomes.
• Wideband vector dipole technology.
• DC Grounded metallic parts for impulse suppression.
General specifications:
Frequency range
790–960 MHz // 1710–2170 MHz // 2490–2690 MHz
Impedance
50 ohms
VSWR 30 dB (790–960 MHz)
intrasystem >28 dB (1710–2170 MHz) (2490–2690 MHz)
intersystem >30 dB (790–960 // 1710–2170 MHz // 2490–2690 MHz)
See reverse for order information.
270°
300°
240°
790–960 MHz
330°
210°
0°
Horizontal pattern
±45°- polarization
3
10
20
30
180°
30°
150°
60°
120°
90°
Specifications: 790–862 MHz 824–894 MHz 880–960 MHz
Average gain (dBi) 16.8 16.7 16.5 17 17 16.8 17.1 17.2 17
Tilt 0.5° 5° 9.5° 0.5° 5° 9.5° 0.5° 5° 9.5°
Front-to-back ratio >25 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar)
(180°±30°)
Maximum input power
500 watts (per input)
(at 50°C)
1000 watts (total power)
+45° and -45° polarization 68° (half-power) 67° (half-power) 65° (half-power)
horizontal beamwidth
+45° and -45° polarization 7.5° (half-power) 7.4° (half-power) 7.1° (half-power)
vertical beamwidth
Electrical downtilt 0.5°–9.5° 0.5°–9.5° 0.5°–9.5°
continuously adjustable
(manual or optional remote control)
Min. suppression for first 0.5° 5° 9.5° T 0.5° 5° 9.5° T 0.5° 5° 9.5° T
sidelobe above main beam 18 16 14 dB 18 17 15 dB 18 18 16 dB
Cross polar ratio (typical)
Main direction 0° 24 dB 23 dB 22 dB
Sector ±60° >10 dB >10 dB >10 dB
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2170 MHz 2490–2690 MHz
Average gain (dBi) 18 18 17.6 17 17 17.5 18.1 18.1 17.4 17.8 17.8 17.6
Tilt 0° 3° 6° 0° 3° 6° 0° 3° 6° 0° 3° 6°
Front-to-back ratio >25 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar)
(180°±30°)
Maximum input power
200 watts (per input)
(at 50°C)
400 watts (total power)
+45° and -45° polarization 62° (half-power) 63° (half-power) 62° (half-power) 63 ° (half-power)
horizontal beamwidth
+45° and -45° polarization 4.8° (half-power) 4.6° (half-power) 4.4° (half-power) 3.5° (half-power)
vertical beamwidth
Electrical downtilt 0°–6° 0°–6° 0°–6° 0°–6°
continuously adjustable
(manual or optional remote control)
Min. suppression for first 0° 3° 6° T 0° 3° 6° T 0° 3° 6° T 0° 3° 6° T
sidelobe above main beam 18 16 16 dB 18 18 17 dB 18 17 17 dB 18 18 18 dB
Cross polar ratio (typical)
Main direction 0° 18 dB 22 dB 23 dB 25 dB
Sector ±60° >10 dB >10 dB >10 dB >10 dB
270°
300°
240°
330°
210°
0°
Vertical pattern
±45°- polarization
0.5°–9.5° electrical downtilt
3
10
20
30
180°
1710 to 2690 MHz
270°
270°
300°
240°
300°
240°
30°
150°
330°
210°
0°
180°
30°
150°
Horizontal pattern
±45°- polarization
330°
60°
120°
90°
3
10
20
30
0°
3
10
20
30
30°
60°
120°
60°
120°
90°
90°
11373-C
936.4045/a
Vertical pattern
±45°- polarization
0°–6° electrical downtilt
Kathrein Inc., Scala Division Post Office Box 4580 Medford, OR 97501 (USA) Phone: (541) 779-6500 Fax: (541) 779-3991
Email: communications@kathrein.com Internet: www.kathrein-scala.com
210°
180°
150°

800 10676
Triple Band 65 Degree Antenna
Mechanical specifications:
Weight
68.3 lb (31 kg)
72.8 lb (33 kg) clamps included
Dimensions
103.2 x 11.8 x 6 inches
(2622 x 300 x 152 mm)
Wind load
at 93 mph (150kph)
Front/Side/Rear
311 lbf / 117 lbf / 335 lbf
(1380 N) / (520 N) / (1490 N)
Mounting category H (Heavy)
Wind survival rating* 120 mph (200 kph)
Shipping dimensions 116.2 x 12.7 x 7.5 inches
(2951 x 322 x 190 mm)
Shipping weight
77.2 lb (35 kg)
Mounting
Fixed mounts for 2 to 4.6 inch (50 to 115 mm)
OD masts are included.
64 mm
M8
2.625 inches ± 0.125
(68 mm ± 4)
2 x 738 546 Mounting Kit
(included)
Mounting Options:
Model
Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch
(included) (50 to 115 mm) OD mast.
4.4 lb (2 kg)
850 10008 Tilt Mount Kit
0–8 degrees
9.5 lb (4.3 kg)
103.2 inches
(2622 mm)
104.4 inches
(2652 mm)
106 inches
(2692 mm)
6 inches
(152 mm)
11.8 inches
(300 mm)
1710–2170
–45°
1710–2170
+45°
790–960
–45°
790–960
+45°
2490–2690
–45°
2490–2690
+45°
Order Information:
Model
Description
800 10676 Dualband antenna with mounting bracket
0.5°–9.5° // 0°–6° electrical downtilt
7-16
7-16 7-16 7-16 7-16
7-16
* Mechanical design is based on environmental conditions as
stipulated in TIA-222-G-2 (December 2009) and/or ETS 300
019-1-4 which include the static mechanical load imposed on
an antenna by wind at maximum velocity. See the Engineering
Section of the catalog for further details.
All specifications are subject to change without notice. The latest specifications are available at www.kathrein-scala.com.
Kathrein Inc., Scala Division Post Office Box 4580 Medford, OR 97501 (USA) Phone: (541) 779-6500 Fax: (541) 779-3991
Email: communications@kathrein.com Internet: www.kathrein-scala.com